STATISTICS

Viewed1166

Downloads533

A Method for Disc Cutter Wear Prediction Based on Neural Network
[1]DING Xiaobin,XIE Yuxuan,XUE Haowen,et al.A Method for Disc Cutter Wear Prediction Based on Neural Network[J].Journal of Zhengzhou University (Engineering Science),2023,44(01):83-88.[doi:10.13705/j.issn.1671-6833.2022.04.009]
Copy
References:
[1] 张银霞, 江志强, 段留洋, 等. TBM 盘形滚刀破岩过 程的数值研究 [ J] . 郑 州 大 学 学 报 ( 工 学 版) , 2016, 37(1) : 75-78.
 ZHANG Y X, JIANG Z Q, DUAN L Y, et al. Numerical research on rock fragmentation process of TBM disc cutter [ J] . Journal of Zhengzhou university ( engineering science) , 2016, 37(1) : 75-78.
 [2] 王永喜. 复合地层中盾构机刀具磨损原因分析及更换 案例 [ J ] . 建 设 机 械 技 术 与 管 理, 2011, 24 ( 3 ) : 79-82.
 WANG Y X. Why are tools worn down and how to replace them while a shield machine operates in complex formation[ J] . Construction machinery technology & management, 2011, 24(3) : 79-82. 
[3] 杨育. 厦门轨道交通 3 号线跨海段盾构滚刀磨损预测 [J]. 隧道建设(中英文), 2018, 38(增刊 1): 182-187. 
YANG Y. Prediction of disc cutter wear of shield used in sea-crossing section on Xiamen rail transit line No. 3[ J] . Tunnel construction, 2018, 38( S1) : 182-187.
[4] 管会生, 高波. 盾构切削刀具寿命的计算[ J] . 工程 机械, 2006, 37(1) : 25-28. 
GUAN H S, GAO B. Calculation for service life of cutting tools of shields [ J] . Construction machinery and equipment, 2006, 37(1) : 25-28.
[5] 杨延栋, 陈馈, 李凤远, 等. 盘形滚刀磨损预测模型 [ J] . 煤炭学报, 2015, 40(6) : 1290-1296. 
YANG Y D, CHEN K, LI F Y, et al. Wear prediction model of disc cutter [ J] . Journal of China coal society, 2015, 40(6) : 1290-1296.
[6] 赵青, 段景川, 杨涛, 等. 风化花岗岩地层的盾构滚 刀磨损预测研究[ J] . 路基工程, 2016(2) : 94-98. ZHAO Q, DUAN J C, YANG T, et al. Research on service life prediction after abrasion of shield hob in weathered granite formation [ J] . Subgrade engineering, 2016(2) : 94-98. 
[7] 翟淑芳, 曹世豪, 冯永, 等. 断续节理岩体的 TBM 滚 刀破岩机理研究[ J] . 郑州大学学报( 工学版) , 2020, 41(1) : 20-24. 
ZHAI S F, CAO S H, FENG Y, et al. The influence of intermittent joint on rock fragmentation by TBM cutter [ J] . Journal of Zhengzhou university ( engineering science) , 2020, 41(1) : 20-24. 
[8] 李笑, 苏小江. 基于 Elman 神经网络的盾构滚刀磨损 预测方法研究[ J] . 辽宁工程技术大学学报( 自然科 学版) , 2010, 29(6) : 1121-1124. 
LI X, SU X J. A new method for forecasting shield′ s disc-cutters wearing based on Elman neural network[ J] . Journal of Liaoning technical university ( natural science) , 2010, 29(6) : 1121-1124. 
[9] 陈子义. 基于正交试验的盾构滚刀磨损分析[ D] . 郑 州: 华北水利水电大学, 2018. 
CHEN Z Y. Analysis of hob wearing of the shield′s based on orthogonal experiment [ D] . Zhengzhou: North China University of Water Resources and Electric Power, 2018. 
[10] 曾锋, 苏华友, 宋天田. 复合地层中盾构机滚刀寿命 预测研究[ J] . 地下空间与工程学报, 2016, 12( 增刊 2) : 755-759. ZENG F, SU H Y, SONG T T. Research on service life prediction for disc cutters of shield machines in complex ground[ J ] . Chinese journal of underground space and engineering, 2016, 12( S2) : 755-759. 
[11] 张伟森. 上软下硬地层盾构机滚刀磨损特性研究[ J] . 地下空间与工程学报, 2019, 15(2) : 583-588. ZHANG W S. Characteristics of disc cutter failures in mixed-face ground condition[ J] . Chinese journal of underground space and engineering, 2019, 15 ( 2 ) : 583-588. 
[12] 陈流豪. 神经网络 BP 算法研究综述[ J] . 电脑知识与 技术, 2010, 6(36) : 10364-10365. CHEN L H. Studying and summarizing of BP neural network[ J] . Computer knowledge and technology, 2010, 6 (36) : 10364-10365.
[13] 尤晓东, 苏崇宇, 汪毓铎. BP 神经网络算法改进综述 [ J] . 民营科技, 2018(4) : 146-147. YOU X D, SU C Y, WANG Y D. Review of BP neural network algorithm improvement [ J] . Private technology, 2018(4) : 146-147. 
[14] 蔡婉贞, 黄翰. 基于 BP-RBF 神经网络的组合模型预 测港口物流需求研究[ J] . 郑州大学学报( 工学版) , 2019, 40(5) : 85-91. 
CAI W Z, HUANG H. A model based on the combination of BP and RBF neural network for port logistic demand forecasting[ J] . Journal of Zhengzhou university ( engineering science) , 2019, 40(5) : 85-91.
[15] 乔金丽, 孟秋杰, 刘建琴, 等. 基于遗传规划的复杂 地层中 盾 构 滚 刀 磨 损 寿 命 预 测 [ J ] . 工 矿 自 动 化, 2018, 44(9) : 51-58. 
QIAO J L, MENG Q J, LIU J Q, et al. Prediction of wear life of shield disc cutter in complex formations based on genetic programming [ J] . Industry and mine automation, 2018, 44(9) : 51-58.
[16] ELBAZ K, SHEN S L, ZHOU A N, et al. Prediction of disc cutter life during shield tunneling with AI via the incorporation of a genetic algorithm into a GMDH-type neural network[ J] . Engineering, 2021, 7(2) : 238-251. 
[17] QIN C, KLABJAN D, RUSSO D. Improving the expected improvement algorithm[EB / OL]. (2017-05-29) [ 2021- 11-03]. https: / / arxiv. org / abs/ 1705. 10033. 
[18] 赵海鸣, 舒标, 夏毅敏, 等. 基于磨料磨损的 TBM 滚 刀磨损预测研究[ J] . 铁道科学与工程学报, 2014, 11 (4) : 152-158. 
ZHAO H M, SHU B, XIA Y M, et al. Study of wear prediction for TBM cutter based on abrasive wear mo-del [ J] . Journal of railway science and engineering, 2014, 11(4) : 152-158.
Similar References:
Memo

-

Last Update: 2022-12-07
Copyright © 2023 Editorial Board of Journal of Zhengzhou University (Engineering Science)