Studies on PSN-PZT Ceramics and Its Application in the Acceleration Sensor
[1]Zhan Zili,Li Yafeng,Chen Xiangyu,et al.Studies on PSN-PZT Ceramics and Its Application in the Acceleration Sensor[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):50-53.[doi:10.3969/j.issn.1671-6833.201511023]
Copy
Journal of Zhengzhou University (Engineering Science)[ISSN
1671-6833/CN
41-1339/T] Volume:
37卷
Number of periods:
2016 02
Page number:
50-53
Column:
Public date:
2016-04-18
- Title:
- Studies on PSN-PZT Ceramics and Its Application in the Acceleration Sensor
- CLC:
- -
- DOI:
- 10.3969/j.issn.1671-6833.201511023
- Abstract:
- 0.02Pb(Sb0.5Nb0.5)O3-0.98Pb1-2xBaxSrx(Zr0.53Ti0.47)O3 piezoelectric ceramics (where x=0.02,0.03,0.04,0.05) were prepared by traditional solid-state sintering method. The different The effect of Ba, Sr composite doping amount and sintering temperature on the structure and electrical properties of ceramics. The results show that when x = 0.04 and the sintering temperature is 1260 ℃, the performance of piezoelectric ceramics is the best, where d33 = 615 pC/N, ε33/ε0=2224, tanδ=2.11%; then install the ceramic chip of this formula into the sensor, test its charge sensitivity, maximum lateral sensitivity ratio and maximum linearity error, the charge sensitivity is 2.72 pC/(m s-2) , the maximum lateral sensitivity ratio is less than 5%, and the maximum linear error is 2.97%, which meets the requirements for the use of general vibration test type sensors.
- References:
- -
- Similar References:
Memo
-
Last Update: