Study on Numerical Simulation of The Steam Turbine Blade Aerodynamic steam turbine increases.Performance Optimization Based on ANSYS CFX
[1]Zhou Junjie,Wang Pu,Zhou Jinfang.Study on Numerical Simulation of The Steam Turbine Blade Aerodynamic steam turbine increases.Performance Optimization Based on ANSYS CFX[J].Journal of Zhengzhou University (Engineering Science),2017,38(04):1-6.[doi:10.13705/j.issn.1671-6833.2017.01.008]
Copy
Journal of Zhengzhou University (Engineering Science)[ISSN
1671-6833/CN
41-1339/T] Volume:
38
Number of periods:
2017 04
Page number:
1-6
Column:
Public date:
2017-07-18
- Title:
- Study on Numerical Simulation of The Steam Turbine Blade Aerodynamic steam turbine increases.Performance Optimization Based on ANSYS CFX
- CLC:
- -
- DOI:
- 10.13705/j.issn.1671-6833.2017.01.008
- Abstract:
- The analysis was held with the 125MW axial flow steam turbine impulse stage blade.The three-dimensional numerical simulation and optimization were conducted by using the commercial software ANSYS CFX.The results showed that the pressure distribution of blade surface reduced,and the radial secondary flow loses was controlled effectively,with optimizing the structure geometric parameters such as ellipticity of the leading edge and trailing edge,relative pitch,inter-stage ratio,and so on.Isentropic efficiency increased by 0.43％,the total pressure loss coefficiency decreased about 0.005.After the optimization,the aerodynamic performance of the blade increased,and the energy loss in the blade decreased and the efficiency of steam turbine increased.
- References:
- -
- Similar References:
Memo
-
Last Update: