Experimental Study on Low Compression Ratio Screw Extruder of Straw
[1]FANGShuqi,HELiping,ZHANGLonglong,et al.Experimental Study on Low Compression Ratio Screw Extruder of Straw[J].Journal of Zhengzhou University (Engineering Science),2015,36(06):1-.[doi:10.3969/j.issn.1671-6833.2015.06.001]
Copy
Journal of Zhengzhou University (Engineering Science)[ISSN
1671-6833/CN
41-1339/T] Volume:
36
Number of periods:
2015 06
Page number:
1-
Column:
Public date:
2015-12-25
- Title:
- Experimental Study on Low Compression Ratio Screw Extruder of Straw
- Keywords:
- straw; compressionratio (CＲ) ; screwextruder; responsesurface
- CLC:
- -
- Abstract:
- The effects of processing variables,such as screw speed,initial moisture content and the length ofthe straw plug pipe of extrusion process on the dewatering rate,handling capacity,output per kW h etc.were experimentally studied using a low CR screw straw extruder. And the response surface optimization exper-imental results showed the extruder can run efficiently,stably and continuously with considerate dewateringrate,handling capacity and output per kW ·h under the conditions that moisture content is 85% ,screw speed50.8 r/min,length of the straw plug pipe is 26.91 mm.
- References:
-
［1］LIMYEMA，ＲICKECS．Lignocelluosic biomass for bioethanol production: Cirrent perspectives，potential issues and future prospects［J］．Progress inEnergy andCombustionScience，2012，38(4) :449－467．［2］宋安东，任天宝，张百良．玉米秸秆生产燃料乙醇的经济性分析［J］．农业工程学报，2010，26(6) :283－286．［3］BALATM，BALATH．Ｒecent trends inglobalproductionandutilizationofbioethanol fuel［J］．AppliedEnergy，2009，86:2273－2282．
- Similar References:
Memo
-
Last Update: