[1]冯启高,傅宇..热挤压工艺过程非稳态的有限元分析[J].郑州大学学报(工学版),2005,26(01):65-68.[doi:10.3969/j.issn.1671-6833.2005.01.017]
　Feng Qigao,Fu Yu.Finite element analysis of unsteady state in hot extrusion process[J].Journal of Zhengzhou University (Engineering Science),2005,26(01):65-68.[doi:10.3969/j.issn.1671-6833.2005.01.017]
点击复制

热挤压工艺过程非稳态的有限元分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
26卷
期数:
2005年01期
页码:
65-68
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:

Finite element analysis of unsteady state in hot extrusion process
作者:
冯启高; 傅宇.
河南科技学院机电工程系,河南,新乡,453003;江苏大学机械工程学院,江苏,镇江,212013, 江苏大学机械工程学院,江苏,镇江,212013
Author(s):
Feng Qigao; Fu Yu
关键词:
热挤压;  有限元法;  非稳态温度场
Keywords:
DOI:
10.3969/j.issn.1671-6833.2005.01.017
文献标志码:
A
摘要:
依据工艺试验所得数据,采用有限元软件对铝棒材挤压成形过程的温度场进行了数值模拟,得出了反映该过程温度场分布和变化情况的云图,并结合实验研究和模拟结果对其工艺规律进行了深入分析.研究结果表明:保压时间是决定工艺稳定性和制件质量的重要工艺参数,合适的保压时间可使挤压过程中变形区金属始终处于半固态,保证工艺的顺利实施.该结论为进一步设计优化工艺参数提供了理论依据.
Abstract:
According to the data obtained from the process test, the temperature field of the aluminum bar extrusion forming process was numerically simulated by finite element software, and a cloud map reflecting the temperature field distribution and change of the process was obtained, and the process law was analyzed in depth based on the experimental research and simulation results. The results show that the holding time is an important process parameter that determines the stability of the process and the quality of the parts, and the appropriate holding time can make the metal in the deformation zone in the extrusion process always remain semi-solid, which ensures the smooth implementation of the process. This conclusion provides a theoretical basis for further design and optimization of process parameters.

相似文献/References:

[1]李伟庆、朱世杰、孙玉峰、关绍康.医用Mg-Zn-Y-Nd合金微细管材的制备及组织性能研究[J].郑州大学学报(工学版),2021,42(02):94.[doi:10.13705/j.issn.1671-6833.2021.02.005]
　Li Weiqing,Zhu Shijie,Sun Yufeng,et al.Preparation, Microstructure and Properties of Medical Mg-Zn-Y-Nd Alloy Micro-tubes[J].Journal of Zhengzhou University (Engineering Science),2021,42(01):94.[doi:10.13705/j.issn.1671-6833.2021.02.005]
[2]朱小青,陈淮,于品德..支座脱空对西张村大桥受力性能的影响[J].郑州大学学报(工学版),2010,31(05):70.[doi:10.3969/j.issn.1671-6833.2010.05.017]
[3]陈淮,申哲会,李静斌,等.斜靠式拱桥施工阶段静力性能分析[J].郑州大学学报(工学版),2011,32(01):1.[doi:10.3969/j.issn.1671-6833.2011.01.001]
[4]陈淮,王晓峰,李静斌,等.横隔板设置对斜交空心板抗扭性能的影响研究[J].郑州大学学报(工学版),2011,32(02):51.[doi:10.3969/j.issn.1671-6833.2011.02.013]
[5]冯庆东,帅健,许葵,等.220t矿用自卸汽车动力学研究[J].郑州大学学报(工学版),2011,32(06):83.[doi:10.3969/j.issn.1671-6833.2011.06.020]
[6]王艳,谷定宇,陈淮..连续多跨矮塔斜拉桥力学性能分析[J].郑州大学学报(工学版),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
[7]惠延波,王宏晓,冯兰芳,等.基于MSC.fatigue的某轻型客车车架疲劳寿命分析[J].郑州大学学报(工学版),2013,34(01):87.[doi:10.3969/j.issn.1671-6833.2013.01.021]
[8]王俊,赵静超,刘立新..预应力度对梁徐变系数与徐变挠度系数数值关系的影响[J].郑州大学学报(工学版),2013,34(05):26.[doi:10.3969/j.issn.1671-6833.2013.05.006]
[9]张洵安,王显彬..软岩隧道开挖与支护的三维有限元仿真分析[J].郑州大学学报(工学版),2008,29(02):137.[doi:10.3969/j.issn.1671-6833.2008.02.035]
　ZHANG Xunan,Wang Xianbin.3D finite element simulation analysis of soft rock tunnel excavation and support[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):137.[doi:10.3969/j.issn.1671-6833.2008.02.035]
[10]张凯,李宇,周燕..刚架拱桥力学性能分析[J].郑州大学学报(工学版),2008,29(04):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]
　ZHANG Kai,LI Yu,Zhou Yan.Analysis of mechanical properties of rigid arch bridges[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]

更新日期/Last Update: 1900-01-01