2020郑大学报（工学版）文章分类（中英文）
发布人：administrator 发布时间：2022/4/1 18:13:12 浏览次数：6415次
【字体:
】
】 智能优化算法
[1]赵庆岩,黎杰,吴顺,等.基于遗传算法优化的机械臂动态矩阵预测控制[J].郑州大学学报(工学版),2020,41(1):32-37.ZHAO Q Y,LI J,WU S, et al. Dynamic matrix predictive control of manipulators based on genetic algorithms[J].Journal of Zhengzhou University (Engineering Science),2020, 41(1): 32-37.
[2]张茂清,李东洋,胡博,等.基于维度扰动的快速非支配排序遗传算法Ⅱ[J].郑州大学学报(工学版),2020,41(1):38-43.
ZHANG M Q,LI D Y,HU B, et al. Non-dominated sorting genetic algorithm II based on dimensionality perturbation[J].Journal of Zhengzhou University (Engineering Science),2020, 41(1):38-43.
[3]吕照民,周革,苗晨.基于自适应主成分分析的化工过程在线监测[J].郑州大学学报(工学版),2020,41(1):44-48.
LYU Z M,ZHOU G,MIAO C. Online monitoring of chemical process based on adaptive principal component analysis[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):44-48.
[4]王艳丽,梁静,薛冰,等.基于进化计算的特征选择方法研究概述[J].郑州大学学报(工学版),2020,41(1):49-57.
WANG Y L,LIANG J,XUE B, et al. Research on evolutionary computation for feature selection[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):49-57.
[5]李勇,金庆雨,张青川.融合位置注意力机制和改进BLSTM的食品评论情感分析[J].郑州大学学报(工学版),2020,41(1):58-62.
LI Y,JIN Q Y,ZHANG Q C. Improved BLSTM food review sentiment analysis with positional attention mechanisms[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):58-62.
[6]张建康,赵悠悠,尚应博,等.基于反馈迭代算法的航空通信系统信道估计算法研究[J].郑州大学学报(工学版),2020,41(2):1-6.
ZHANG J K,ZHAO Y Y,SHANG Y B, et al. Feedback-iterative channel estimation algorithm for aeronautical communication system[J].Journal of Zhengzhou University (Engineering Science),2020,41(02):1-6.
[7]魏宏彬,张端金,杜广明,等.基于改进型YOLO v3的蔬菜识别算法[J].郑州大学学报(工学版),2020,41(2):7-12+31.
WEI H B,ZHANG D J,DU G M,et al. Vegetable recognition algorithm based on improved YOLOv3[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):7-12+31.
[8]王翥,刘春龙,罗清华.超声波传感器特性分析与测试方法的研究[J].郑州大学学报(工学版),2020,41(2):13-18.
WANG Z,LIU C L,LUO Q H. Research on ultrasonic sensors characteristics and testing method[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):13-18.
[9]刘华军,张瑞珏,刘建锋,等.基于FPGA的高分辨率视频图像实时增强去雾系统[J].郑州大学学报(工学版),2020,41(2):19-24.
LIU H J,ZHANG R J,LIU J F,et al. High resolution video image real-time enhancement system based on FPGA[J].Journal of Zhengzhou University (Engineering Science),2020, 41(2):19-24.
[10]白国长,姚记亮.基于改进滑模观测器的BLDCM无传感器控制[J].郑州大学学报(工学版),2020,41(2):25-31.
BAI G C,YAO J L. Sensorless Control of BLDCM Based on improved sliding mode observer[J].Journal of Zhengzhou University (Engineering Science),2020,41(02):25-31.
[11]孙晓燕,聂鑫,暴琳,等.基于改进Wide&Deep交互特征提取的移动APP转化率预估[J].郑州大学学报(工学版),2020,41(6):26-32.
SUN X Y,NIE X,BAO L,et al. The mobile APP conversion rate prediction based on improved wide＆deep of interactive feature extraction[J].Journal of Zhengzhou University (Engineering Science),2020,41(06):26-32.
[12]杨文强,张素君,郭昊.求解仓储作业优化问题的多物种协同进化算法[J].郑州大学学报(工学版),2020,41(6):33-39.
YANG W Q,ZHANG S J,GUO H. Operation optimization of warehousing by multispecies co-evolution algorithm[J].Journal of Zhengzhou University (Engineering Science),2020, 41(6): 33-39.
[13]汪慎文,王佳莹,张佳星,等.应用精英档案和反向学习的多目标差分进化算法[J].郑州大学学报(工学版),2020,41(6):40-45+91.
WANG S W,WANG J Y,ZHANG J X,et al. A Multi-objective differential evolution algorithm with elite-archive and opposition-based learning[J].Journal of Zhengzhou University (Engineering Science),2020,41(6):40-45+91.
智能信息
[1]张勇,高光辉,郭一楠,等.融合差分进化和Taylor级数的超宽带定位解算方法[J].郑州大学学报(工学版),2020,41(1):70-74+82.ZHANG Y,GAO G H,GUO Y N,et al. Ultra-wideband positioning solution method based on differential evolution and taylor series[J].Journal of Zhengzhou University (Engineering Science),2020,41(1):70-74+82.
[2]王华,何晓宇,徐静,等.融合交通心理学的车辆群组运动仿真研究综述[J].郑州大学学报(工学版),2020,41(1):83-90.
WANG H,HE X Y,XU J,et al.Survey of psychology based traffic simulation[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):83-90.
[3]尚志刚,沈晓阳,李蒙蒙,等.基于格兰杰因果的效应性连接分析方法综述[J].郑州大学学报(工学版),2020,41(3):1-7+13.
SHANG Z G,SHEN X Y,LI M M,et al. Review of the analysis methods of effective connectivity based on granger causality[J].Journal of Zhengzhou University (Engineering Science),2020,41(3):1-7+13.
[4]左敏,徐泽龙,张青川,等.基于双维度中文语义分析的食品领域知识库问答[J].郑州大学学报(工学版),2020,41(3):8-13.
ZUO M,XU Z L,ZHANG Q C,et al. A Question answering model of food domain knowledge bases with two-dimension chinese semantic analysis[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):8-13.
[5]李水佳,龚文引.基于自适应差分演化算法的光伏模型参数提取[J].郑州大学学报(工学版),2020,41(3):14-19.
LI S J,GONG W Y. Parameter Extraction of photovoltaic models based on adaptive differential evolution algorithm[J].Journal of Zhengzhou University (Engineering Science), 2020, 41(3):14-19.
[6]张成才,李飞,王艳梅,等.MKFCM算法在遥感影像分类中的应用研究[J].郑州大学学报(工学版),2020,41(3):20-25.
ZHANG C C,LI? F,WANG Y M,et al. Remote sensing image classification based on multi-core fuzzy c-means clustering[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):20-25.
[7]张端金,郭璐.具有双边丢包和混合时延的Delta算子系统H∞滤波[J].郑州大学学报(工学版),2020,41(3):26-31+46.
ZHANG D J,GUO L. H∞ filtering for delta operator systems with two-channel packet dropouts and mixed delays[J].Journal of Zhengzhou University (Engineering Science), 2020,41(3):26-31+46.
[8]陈丽萍,王铭羽,杨文柱,等.基于改进核相关滤波的长时目标跟踪算法[J].郑州大学学报(工学版),2020,41(3):32-36.
CHEN L P,WANG M Z,YANG W Z,et al. An Improved kernelized correlation filter for long-term target tracking[J].Journal of Zhengzhou University (Engineering Science),2020, 41(3):32-36.
[9]张茂清,汪镭,崔志华,等.基于混合策略的快速非支配排序算法Ⅱ[J].郑州大学学报(工学版),2020,41(4):23-27.
ZHANG M Q,WANG L,CUI Z H, et al. Fast non-dominated sorting genetic algorithm II based on hybrid strategies[J].Journal of Zhengzhou University (Engineering Science),2020, 41(4):23-27.
[10]孙国栋,江亚杰,徐亮,等.BP网络预测阈值的仪表重影字符识别方法研究[J].郑州大学学报(工学版),2020,41(4):28-33.
SUN G D,JIANG Y J,XU L,.et al. Study on Instrument ghosting character recognition method for predicting binarization threshold by BP network[J].Journal of Zhengzhou University (Engineering Science),2020,41(4):28-33.
[11]欧阳海滨,全永彬,高立群,等.基于混合遗传粒子群优化算法的层次路径规划方法[J].郑州大学学报(工学版),2020,41(4):34-40.
OUYANG H B,QUAN Y B,GAO L Q,et al. Hierarchical path planning method for mobile robots based on hybrid genetic particle swarm optimization algorithm[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):34-40.
[12]王丙琛,司怀伟,谭国真.基于深度强化学习的自动驾驶车控制算法研究[J].郑州大学学报(工学版),2020,41(4):41-45+80.
WANG B C,SI H W,TAN G Z. Research on autopilot control algorithm based on deep reinforcement learning[J].Journal of Zhengzhou University (Engineering Science),2020, 41(4):41-45+80.
[13]高岳林,武少华.基于自适应粒子群算法的机器人路径规划[J].郑州大学学报(工学版),2020,41(4):46-51.
GAO Y L,WU S H. Robot path planning based on adaptive particle swarm algorithm[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):46-51.
[14]朱晓东,王鼎.求解双目标VRPTW的改进混合蚁群算法[J].郑州大学学报(工学版), 2020,41(4):52-58.
ZHU X D,WANG D.An Improved hybrid ant colony algorithm for Bi-objective VRPTW[J]. Journal of Zhengzhou University (Engineering Science),2020,41(04):52-58.
[15]范勤勤,柳缔西子,王筱薇,等.基于反向学习的微种群教与学优化算法及其应用[J].郑州大学学报(工学版),2020,41(4):59-67.
FAN Q Q,LIU D X Z,WANG X W,et al. Opposition-based learning teaching-learning-based optimization algorithm with a micro population and its application[J].Journal of Zhengzhou University (Engineering Science),2020,41(4):59-67.
化工与材料工程
[1]邹卫华，刘鹏磊,刘秋节,等.磁性活性炭对水体中磺胺嘧啶钠的吸附机理研究[J].郑州大学学报(工学版),2020,41(4):92-96.ZOU W H,LIU P L,LIU Q J, et al. Investigation into the adsorption mechanism of sulfadiazine sodium in aqueous solution using magnetic biochar[J].Journal of Zhengzhou University (Engineering Science), 2020,41(4):92-96.
[2]张涛,郭一民,李卓扬,等.碳量子点诱导人体肝癌细胞凋亡的研究[J].郑州大学学报(工学版),2020,41(5):1-7.
ZHANG T,GUO Y M,LI Z Y, et al. Carbon quantum dots as potent agent to induce apoptosis of human hepatoma cells[J].Journal of Zhengzhou University (Engineering Science),2020, 41(5): 1-7.
[3]卢红霞,高凯,李明亮,等.以高炉渣为助烧剂制备ZTA/TiC复合陶瓷及其性能研究[J].郑州大学学报(工学版),2020,41(5):8-14.
LU H X,GAO K,LI M L,et al. Preparation of ZTA/TiC composite ceramics using blast furnaceslag as sintering aid[J].Journal of Zhengzhou University (Engineering Science),2020, 41(5):8-14.
[4]郭美圆,曹晨璐,曹春梅,等.石墨烯为载体的Pd/SnO2合成及其CO气敏性能研究[J].郑州大学学报(工学版),2020,41(5):15-20.
GUO M Y,CAO C L,CAO C M,et al. Synthesis of Pd Doped SnO2/Graphene composites and its gas sensing properties to CO[J].Journal of Zhengzhou University (Engineering Science), 2020, 41(5):15-20.
[5]炊宁博,黄佳佳,原思国,等.新型N、S共掺杂微孔碳材料的制备及性能研究[J].郑州大学学报(工学版),2020,41(5):21-25+36.
CHUI N B,HUANG J J,YUAN S G, et al. Preparation and properties of novel N,S-codoped microporous carbon[J].Journal of Zhengzhou University (Engineering Science),2020,41(5): 21-25+36.
[6]邹云,王起龙,李阳,等.基于超声纳米表面改性的镁锂合金强化研究[J].郑州大学学报(工学版),2020,41(5):26-30.
ZOU Y,WANG Q L,LI Y,et al. Strengthening research of Mg-Li alloy based on ultrasonic nanocrystal surface modification[J].Journal of Zhengzhou University (Engineering Science),2020,41(05):26-30.
[7]贾瑞娟,王钰翠,常春,等.Fe/Cu纳米复合材料对罗丹明B的吸附性能研究[J].郑州大学学报(工学版),2020,41(5):31-36.
JIA R J,WANG Y C,CHANG C,et al.The adsorption characteristics of Fe/Cu nanocomposites to rhodamine B[J].Journal of Zhengzhou University (Engineering Science),2020, 41(5): 31-36.
[8]王建设,闫杰杰,张冲,等.Pd/CeO2湿法构筑及催化甲酸盐、乙醇电氧化研究[J].郑州大学学报(工学版),2020,41(6):85-91.
WANG J S,YAN J J,ZHANG C, et al. Wet-chemistry fabrication of Pd/CeO2 interfaces and comparison with Pd /SnO2 in terms of formate and ethanol electro-oxidation catalysis[J]. Journal of Zhengzhou University (Engineering Science),2020,41(06):85-91.
[9]李莎莎,常英杰,赵洁,等.盐酸丁卡因多晶型制备和溶解度测定与关联[J].郑州大学学报(工学版),2020,41(6):92-96.
LI S S,CHANG Y J,ZHAO J, et al. Preparation of polymorphism of tetracaine hydrochloride and measurement and correlation of the solubility[J].Journal of Zhengzhou University (Engineering Science),2020,41(6):92-96.
机械与动力工程
[1]陈静,徐延海,朱鹏兴,等.基于Trucksim整车操纵稳定性影响参数的研究[J].郑州大学学报(工学版),2020,41(1):13-19.CHEN J,XU Y H,ZHU P X,et al. Research on vehicle handling stability affected parameters based on trucksim[J].Journal of Zhengzhou University (Engineering Science),2020,41(1): 13-19.
[1]马泳涛,安乐乐,张伦敦,等.水射流工艺对渗碳钢圆棒表层改性影响的研究[J].郑州大学学报(工学版),2020,41(1):91-96.
MA Y T,AN L L,ZHANG L D,et al. Study on the influence of water jet modification process on carburized steel round bars[J].Journal of Zhengzhou University (Engineering Science), 2020,41(01):91-96.
[2]高祥林,王建明,汪言,等.升降平台运动构件焊缝疲劳寿命数值仿真[J].郑州大学学报(工学版),2020,41(2):32-37.
GAO X L,WANG J M,WANG Y,et al. Numerical simulation of weld fatigue life of moving components of lifting platform[J].Journal of Zhengzhou University (Engineering Science), 2020,41(02):32-37.
[3]王刚,宋建,张建伟,等.基于多晶体模型的18CrNiMo7-6合金钢本构参数确定[J].郑州大学学报(工学版),2020,41(2):38-43.
WANG G,SONG J,ZHANG J W,et al. Constitutive parameters of 18CrNiMo7-6 alloy determined by a polycrystalline model[J].Journal of Zhengzhou University (Engineering Science),2020,41(02):38-43.
[4]刘治华,张天增,杨孟俭,等.超声滚压18CrNiMo7-6齿轮钢表面变质层性能分析[J].郑州大学学报(工学版),2020,41(2):44-49+79.
LIU Z H,ZHANG T Z,YANG M J, et al. Performance analysis of surface modification layer of 18CrNiMo7-6 gear steel treated by ultrasonic rolling[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):44-49+79.
[5]张志刚,周翔,房占鹏,等.基于绝对节点坐标方法的柔顺机构动力学建模与仿真[J].郑州大学学报(工学版),2020,41(2):50-55.
ZHANG Z G,ZHOU X,FANG Z P, et al. Dynamics Modeling and simulation of compliant mechanisms using absolute nodal coordinate formulation[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):50-55.
[6]秦盛伟,张玉芳,张棒.18CrNiMo7-6钢渗碳仿真扩散系数模型的研究[J].郑州大学学报(工学版),2020,41(2):56-60.
QIN S W,ZHANG Y F,ZHANG B. Study on diffusion coefficient of carburizing process simulation of 18CrNiMo7-6 steel[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):56-60.
[7]张三川,苗帅宾.基于热仿真的动力电池箱结构紧凑化参数优化[J].郑州大学学报(工学版),2020,41(3):37-41.
ZHANG S C,MIAO S B. Compact design parameters optimization of power battery box structure in electric vehicle based on thermal simulation[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):37-41.
[8]徐一村,张磊.基于ADAMS的平底从动件凸轮轮廓曲线设计[J].郑州大学学报(工学版),2020,41(3):42-46.
XU Y C,ZHANG L. Design of cam profile curve of flat bottom follower based on ADAMS[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):42-46.
[9]邱正新,刘本学,张赛鹏,等.GW46-126高压隔离开关耐温性试验研究[J].郑州大学学报(工学版),2020,41(3):47-52.
QIU Z X,LIU B X,ZHANG S P, et al. Experimental Study on temperature resistance of GW46-126 high voltage isolation switch[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):47-52.
[10]刘竹丽,陈赟,王祝新.齿面残余应力对齿轮轮齿弯曲疲劳寿命的影响分析[J].郑州大学学报(工学版),2020,41(3):53-56.
LIU Z L,CHEN Y,WANG Z X. The influence of residual stress of tooth surface on bending fatigue life of gear tooth[J].Journal of Zhengzhou University (Engineering Science),2020, 41(3):53-57.
[11]周洋,徐改姣,李大磊.轴与齿轮过盈配合参数对齿形的影响研究[J].郑州大学学报(工学版),2020,41(3):57-61.
ZHOU Y,XU G J,LI D L. Research on the influence of interference fit parameters of shaft and gear on tooth profile[J].Journal of Zhengzhou University (Engineering Science),2020, 41(3):57-61.
[12]徐刚,梁帅,刘武发,等.流动聚焦型微流控芯片微通道结构优化[J].郑州大学学报(工学版),2020,41(4):87-91.
XU G,LIANG S,LIU W F, et al. Optimization of micro-channel structure of flow focusing microfluidic chip[J].Journal of Zhengzhou University (Engineering Science),2020, 41(4): 87-91.
[13]雷文平,宋圣霖,郝旺身,等.基于FV-FBE的滚动轴承故障诊断研究[J].郑州大学学报(工学版),2020,41(5):82-86.
LEI W P,SONG S L,HAO W S, et al. Fault diagnosis of rolling bearing based on FV-FBE[J]. Journal of Zhengzhou University (Engineering Science),2020,41(05):82-86.
[14]房占鹏,张孟珂,李宏伟.平稳随机激励下约束阻尼结构布局优化设计[J].郑州大学学报(工学版),2020,41(5):87-91.
FANG Z P, ZHANG M K, LI H W. Layout optimization of constrained layer damping structure under stationary random excitation[J].Journal of Zhengzhou University (Engineering Science), 2020, 41(5):87-91.
[15]郝旺身,陈耀,孙浩,等.基于全矢-CNN的轴承故障诊断研究[J].郑州大学学报(工学版),2020,41(5):92-96.
HAO W S,CHEN Y,SUN H, et al. Bearing Fault Diagnosis based on full vector-CNN[J]. Journal of Zhengzhou University (Engineering Science),2020,41(05):92-96.
[16]许贤泽,王星宇,刘盼盼,等.光纤棒机床自动定位与对准装置[J].郑州大学学报(工学版),2020,41(6):1-6.
XU X Z,WANG X Y,LIU P P,et al. The Automatic location and alignment device for optical fiber preform machine tools[J].Journal of Zhengzhou University (Engineering Science),2020, 41(06):1-6.
[17]李阳,彭笑永,李大磊,等.激光超声无损测量40Cr钢渗氮层深度的实验研究[J].郑州大学学报(工学版),2020,41(6):7-12.
LI Y,PENG X Y,LI D L,et al. Experimental investigation on non-destructive measuring of the nitriding thickness of 40Cr steel by laser ultrasonic[J].Journal of Zhengzhou University (Engineering Science),2020,41(6):7-12.
[18]张三川,叶建明,师艳娟.基于毫米波雷达的汽车前防撞预警系统设计[J].郑州大学学报(工学版),2020,41(6):13-18.
ZHANG S C,YE J M,SHI Y J.Design of vehicle forward collision warning system based on millimeter wave radar[J].Journal of Zhengzhou University (Engineering Science),2020,41(6): 13-18.
[19]曾发林,蔡嘉伟,孙苏民.基于CEEMD样本熵和GA-BP的排气噪声声品质预测[J].郑州大学学报(工学版),2020,41(6):19-25.
ZENG F L,CAI J W,SUN S M.Sound Quality prediction for exhaust noise based on CEEMD sample entropy and GA-BP[J].Journal of Zhengzhou University (Engineering Science),2020,41(6):19-25.
电气工程
[1]高金峰,秦瑜瑞,殷红德.基于小波包变换和支持向量机的故障选线方法[J].郑州大学学报(工学版),2020,41(1):63-69.GAO J F,QIN Y R,YIN H D. Fault line selection based on wavelet packet transform and support vector machine[J].Journal of Zhengzhou University (Engineering Science),2020, 41(1):63-69.
[2]王克文,刘凯,刘艳红.计及功率预测误差的主动配电网运行方式优化[J].郑州大学学报(工学版),2020,41(1):75-82.
WANG K W,LIU K,LIU Y H. Optimization of run mode of active distribution network with power prediction error[J].Journal of Zhengzhou University (Engineering Science),2020, 41(1):75-82.
[3]章健,张玉晓,熊壮壮,等.计及DR的新能源配电网电压无功协调优化[J].郑州大学学报(工学版),2020,41(2):61-66.
ZHANG J,ZHANG Y X,,XIONG Z Z,et al. Voltage reactive power coordination optimization of distributed new energy network considering DR[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):61-66.
[4]贾茹宾,高金峰.基于ARIMA模型的变压器油中溶解气体含量时间序列预测方法[J].郑州大学学报(工学版),2020,41(2):67-72.
JIA R B,GAO J F. Time Series prediction method of dissolved gas content in transformer oil based on ARIMA model[J].Journal of Zhengzhou University (Engineering Science),2020, 41(02):67-72.
[5]张青林,辛小南,程志平.基于深度优先搜索和灰狼算法的微电网重构[J].郑州大学学报(工学版),2020,41(2):73-79.
ZHANG Q L,XIN X N,CHENG Z P. Optimization method based on depth-first search and grey wolf optimization algorithm for reconfiguration of microgrid[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):73-79.
[6]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(4):68-73.
HE Z S,CHEN L,WANG W J,et al. Analysis of temperature field for central electric junction box based on ABAQUS[J].Journal of Zhengzhou University (Engineering Science),2020, 41(04):68-73.
[7]程显,朱剑鹏,赵海洋,等.雷电冲击对一二次融合成套开关电磁干扰研究[J].郑州大学学报(工学版),2020,41(4):74-80.
CHENG X,ZHU J P,ZHAO H Y,et al. Research on electromagnetic interference of lightning impact test of primary and secondary distribution switches[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):74-80.
[8]陈强,王骅,王克文,等.大容量调相机PSVR参数调整[J].郑州大学学报(工学版),2020, 41(4):81-86.
CHEN Q,WANG H,WANG K W,et al. PSVR parameters adjustment on large capacity synchronous condensers[J].Journal of Zhengzhou University (Engineering Science),2020, 41(04):81-86.
[9]邓立宝,吴怡然,郭苏.基于分解多目标进化的椭圆定日镜场布局[J].郑州大学学报(工学版),2020,41(5):37-43.
DENG L B,WU Y R,GUO S.Elliptical heliostat field layout optimization based on MOEA/D[J].Journal of Zhengzhou University (Engineering Science),2020,41(05):37-43.
[10]张颖超,成金杰,邓华,等.基于相似日和特征提取的短期风电功率预测[J].郑州大学学报(工学版),2020,41(5):44-49.
ZHANG Y C,CHENG J J,DENG H,et al.Short-Term wind power prediction based on similar day and feature extraction[J].Journal of Zhengzhou University (Engineering Science),2020, 41(5): 44-49.
[11]段俊东,付子恒,张普胜,等.平滑含DG配网功率波动的储能容量优化研究[J].郑州大学学报(工学版),2020,41(5):50-54.
DUAN J D,FU Z H,ZHANG P S,et al. Optimized study of energy storage systems capacity for power smoothing of distribution containing DG[J].Journal of Zhengzhou University (Engineering Science),2020,41(05):50-54.
[12]章健,张玉晓,朱永胜,等.计及DR的电-气综合能源系统的鲁棒优化调度[J].郑州大学学报(工学版),2020,41(6):66-72.
ZHANG J,ZHANG Y X,ZHU Y S,et al. Robust optimal dispatch of electric-gas integrated energy system considering with demand response[J].Journal of Zhengzhou University (Engineering Science),2020,41(06):66-72.
[13]李德威,宰祥卫,张胜,等.基于模糊灰理论的ZPW-2000A轨道电路风险评估[J].郑州大学学报(工学版),2020,41(6):73-78.
LI D W,ZAI X W,ZHANG S, et al. Risk assessment of ZPW-2000A track circuit based on fuzzy grey theory[J]. Journal of Zhengzhou University (Engineering Science),2020, 41(6): 73-78.
[14]史如新,王德顺,余涛,等.基于NARX神经网络-小波分解光伏发电功率预测[J].郑州大学学报(工学版),2020,41(6):79-84.
SHI R X,WANG D S,YU T,et al. Prediction of photovoltaic power generation based on NARX neural network-wavelet decomposition[J].Journal of Zhengzhou University (Engineering Science),2020,41(6):79-84.
土木与交通工程
[2]张猛,梁任,赵桂峰.架空导线径向温差及允许载流量研究[J].郑州大学学报(工学版),2020,41(1):1-7.ZHANG M,LIANG R,ZHAO G F. Study on radial temperature distribution and maximum ampacity of overhead conductors [J].Journal of Zhengzhou University (Engineering Science),2020,41(1):1-7.
[3]李会知,翟参,肖方恰,等.生猪转运车烘干房风系统优化研究[J].郑州大学学报(工学版),2020,41(1):8-12.
LI H Z,ZHAI C,XIAO F Q,et al. Optimization of air system in drying room of pig transport truck[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):8-12.
[4]翟淑芳,曹世豪,冯永,等.断续节理岩体的TBM滚刀破岩机理研究[J].郑州大学学报(工学版),2020,41(1):20-24.
ZHAI S H,CAO S H,FENG Y,et al. The Influence of intermittent joint on rock fragmentation by TBM cutter [J].Journal of Zhengzhou University (Engineering Science),2020,41(1): 20-24.
[5]吉伯海,蒋斐,王益逊,等.钢桥面板顶板-U肋焊缝多轴疲劳效应评估[J].郑州大学学报(工学版),2020,41(1):25-31.
JI B H,JIANG F,WANG Y X,et al. Multiaxial fatigue evaluation of U-rib to deck welded joint in steel bridge deck[J].Journal of Zhengzhou University (Engineering Science),2020,41(1): 25-31.
[6]宋林涧,赵军.钢筋混凝土剪力墙在竖向荷载作用下的稳定性分析[J].郑州大学学报(工学版),2020,41(2):80-85.
SONG L J,ZHAO J.The stability analysis of reinforced concrete shear wall under vertical compression[J].Journal of Zhengzhou University (Engineering Science),2020,41(02):80-85.
[7]张哲,史锦,李国强,等.带翼缘板嵌入式连接件抗剪承载力试验研究[J].郑州大学学报(工学版),2020,41(2):86-90.
ZHANG Z,SHI J,LI G Q,et al. Experimental study on shear bearing capacity of embedded connector with flange plate[J].Journal of Zhengzhou University (Engineering Science),2020, 41(02):86-90.
[8]温森,贾书耀,高星璞.侧压系数及回填材料对双护盾TBM卡机控制的影响分析[J].郑州大学学报(工学版),2020,41(2):91-96.
WEN S,JIA S Y,GAO X P. Impact of lateral pressure coefficient and backfilling material on double shield TBM jamming control[J].Journal of Zhengzhou University (Engineering Science),2020,41(2):91-96.
[9]张雅琴,杨平,江汪洋,等.含水率及应变速率对冻结粉质黏土强度特性影响[J].郑州大学学报(工学版),2020,41(3):79-84.
ZHANG Y Q,YANG P,JIANG W Y,et al. Effect of water content and strain rate on the strength characteristics of frozen silty clay [J].Journal of Zhengzhou University (Engineering Science),2020,41(3): 79-84.
[10]王朝华,赵桂峰,刘冉,等.高压变电站构架避雷针结构承载力分析与加固研究[J].郑州大学学报(工学版),2020,41(3):85-90.
WANG C H,ZHAO G F,LIU R,et al. Bearing capacity and reinforcement analysis of a high voltage substation framework with lightning rods [J].Journal of Zhengzhou University (Engineering Science),2020,41(03):85-90.
[11]张雪妍,贺锋.基于累积前景理论的组合出行交通分配模型[J].郑州大学学报(工学版),2020,41(3):91-96.
ZHANG X Y,HE F. Traffic Assignment model with combined modes based on cumulative prospect theory[J].Journal of Zhengzhou University (Engineering Science),2020, 41(3): 91-96.
[12]王复明,何航,方宏远,等.交通和运行荷载耦合作用下管道承插口力学响应研究[J].郑州大学学报(工学版),2020,41(4):1-6.
WANG FM,HE H,FANG H Y,et al. Study on mechanical response of the bell-and-spigot joints of pipeline under the coupling of traffic and running load[J].Journal of Zhengzhou University (Engineering Science),2020,41(4):1-6.
[13]严亚丹,李杨,仝佩.基于修正通行能力的道路出入口位置优化方法[J].郑州大学学报(工学版),2020,41(4):7-11.
YAN Y D,LI Y,TONG P. Optimization method of road access location based on modified capacity[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):7-11.
[14]乐金朝,张世兴,乐明静,等.不同损伤度和愈合温度条件下沥青胶浆自愈合行为研究[J].郑州大学学报(工学版),2020,41(4):12-16.
YUE J C,ZHANG S X,YUE M J,et al. Study on self-healing behavior of asphalt mastic under different damage degree and healing temperature[J].Journal of Zhengzhou University (Engineering Science),2020,41(4):12-16.
[15]邵昀泓,庞亚凤,郑元勋,等.再生混凝土破坏机理及力学增强策略研究综述[J].郑州大学学报(工学版),2020,41(4):17-22.
SHAO Y H,PANG Y F,ZHENG Y X,et al. The overview on failure mechanism and strengthening measure of mechanical properties for recycled concrete[J].Journal of Zhengzhou University (Engineering Science),2020,41(4):17-22.
[16]钟委,刘欣,高子鹤.纵向通风对隧道火灾特性及竖井自然排烟效果的影响[J].郑州大学学报(工学版),2020,41(6):46-52.
ZHONG W,LIU X,GAO Z H. Experimental investigation on the influence of longitudinal ventilation on tunnel fire characteristics and natural smoke exhaust by shaft[J].Journal of Zhengzhou University (Engineering Science),2020,41(06):46-52.
[1]时刚,田新涛.工程卡车行驶引发地面振动特性研究[J].郑州大学学报(工学版),2020, 41(5):76-81.
SHI G,TIAN X T. Research on ground vibration characteristics caused by engineering truck driving[J].Journal of Zhengzhou University (Engineering Science),2020,41(5):76-81.
[17]朱媛媛,王笑梅.热局部非平衡流体多孔弹性半平面问题的非线性研究[J].郑州大学学报(工学版),2020,41(6):60-65.
ZHU Y Y,WANG X M. Nonlinear study on fluid porous elastic half-plane based on local thermal non-equilibrium[J].Journal of Zhengzhou University (Engineering Science),2020, 41(6): 60-65.
水利与环境工程
[2]李宗坤,王特,葛巍,等.基于WBS-RBS和AHP的港珠澳大桥人工岛建设风险分析[J].郑州大学学报(工学版),2020,41(3):62-66.LI Z K,WANG T,GE W,et al. Risk Analysis of artificial island construction of Hong Kong-Zhuhai-Macao bridge based on WBS-RBS and AHP methods[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):62-66.
[3]韩华强,陈生水,王占军,等.母岩变形特性差异对堆石料力学性质的影响[J].郑州大学学报(工学版),2020,41(3):67-71.
HAN H Q,Chen S S,WANG Z J,et al. Influence of deformation characteristics of mother rock on mechanical properties of rockfill materials[J].Journal of Zhengzhou University (Engineering Science),2020,41(3):67-71.
[4]张双圣,强静,刘汉湖,等.基于拉丁超立方抽样的改进型多链DRAM算法求解地下水污染反问题[J].郑州大学学报(工学版),2020,41(3):72-78.
ZHANG S S,QIANG J,LIU H H,et al. Improved multi-chain DRAM algorithm based on latin hypercube sampling for inverse problems of underground water pollution[J].Journal of Zhengzhou University (Engineering Science),2020,41(3):72-78.
[5]李宗坤,宋子元,葛巍,等.基于模糊集理论的土石坝开裂破坏风险分析[J].郑州大学学报(工学版),2020,41(5):55-59.
LI Z K,SONG Z Y,GE W,et al. Risk analysis of cracking failure of earth-rock dam based on fuzzy set theory[J].Journal of Zhengzhou University (Engineering Science),2020,41(5): 55-59.
[6]窦明,胡浩东,王继华,等.城市水源地深层承压水合理开采水位阈值研究[J].郑州大学学报(工学版),2020,41(5):60-65.
DOU M,HU H D,WANG J H, et al. Study on rational water level threshold of deep confined water in urban water sources[J].Journal of Zhengzhou University (Engineering Science),2020,41(05):60-65.
[7]郜新军,段鹏辉,王磊.基坑开挖对邻近管线变形影响及控制措施研究[J].郑州大学学报(工学版),2020,41(5):66-71.
GAO X J,DUAN P H,WANG L. The influence of foundation pit excavation on deformation of adjacent underground pipelines and control measures[J].Journal of Zhengzhou University (Engineering Science),2020,41(5):66-71.
[8]彭赵旭,韩微,娄天宇,等.剩余污泥驯化过程中的除磷性能[J].郑州大学学报(工学版),2020,41(5):72-75+96.
PENG Z X,HAN W,LOU T Y,et al. Phosphorus removal performance during the recovery process of residual sludge[J].Journal of Zhengzhou University (Engineering Science),2020, 41(5):72-75+96.
[9]陈泽钦,刘国明.基于Gudehus-Bauer亚塑性模型的面板堆石坝应力变形研究[J].郑州大学学报(工学版),2020,41(6):53-59.
CHEN Z Q,LIU G M. Stress and Deformation of CFRD based on Gudehus-Bauer subplastic constitutive model[J].Journal of Zhengzhou University (Engineering Science),2020,41(6): 53-59.