[1]李天,孙永胜..高塔型烟气脱硫吸收塔结构动力特性分析[J].郑州大学学报(工学版),2007,28(02):64-67.[doi:10.3969/j.issn.1671-6833.2007.02.017]
　LI Tian,Sun Yongsheng.Analysis of structural dynamic characteristics of high-tower flue gas desulfurization absorption tower[J].Journal of Zhengzhou University (Engineering Science),2007,28(02):64-67.[doi:10.3969/j.issn.1671-6833.2007.02.017]
点击复制

高塔型烟气脱硫吸收塔结构动力特性分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
28卷
期数:
2007年02期
页码:
64-67
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Analysis of structural dynamic characteristics of high-tower flue gas desulfurization absorption tower
作者:
李天; 孙永胜.
郑州大学,土木工程学院,河南,郑州,450001, 郑州大学,土木工程学院,河南,郑州,450001
Author(s):
LI Tian; Sun Yongsheng
关键词:
烟气脱硫吸收塔;  有限元法;  动力特性;  结构刚度
Keywords:
DOI:
10.3969/j.issn.1671-6833.2007.02.017
文献标志码:
A
摘要:
目前国内尚没有吸收塔结构设计规范,通过分析国内薄壁塔类结构相关规范,得出薄壁塔类结构的动力特性计算方法基本归结为仅考虑结构本身与仅考虑固液藕联作用两大类;根据有限元理论,对带有高塔的烟气脱硫吸收塔结构进行有限元建模,并进行了动力特性分析,对其刚度分布情况有了深入的了解;通过将有限元分析结果与按国内各薄壁塔类结构规范中的公式计算结果进行比较,得出吸收塔结构基本自振周期可按照<钢制塔式容器>中的公式进行计算,误差为4.5%.
Abstract:
At present, there is no absorption tower structure design code in China, and by analyzing the relevant specifications of domestic thin-walled tower structure, it is concluded that the dynamic characteristics calculation method of thin-walled tower structure is basically reduced to two categories: only considering the structure itself and only considering the solid-liquid coupling effect. According to the finite element theory, the structure of flue gas desulfurization absorption tower with high tower is modeled by finite element and dynamic characteristics are analyzed, and the stiffness distribution is deeply understood. By comparing the results of finite element analysis with the calculation results according to the formulas in the structural specifications of various thin-walled towers in China, it is concluded that the basic self-vibration period of the absorption tower structure can be calculated according to the formula in the > of < steel tower vessels, with an error of 4.5%.

相似文献/References:

[1]朱小青,陈淮,于品德..支座脱空对西张村大桥受力性能的影响[J].郑州大学学报(工学版),2010,31(05):70.[doi:10.3969/j.issn.1671-6833.2010.05.017]
[2]陈淮,申哲会,李静斌,等.斜靠式拱桥施工阶段静力性能分析[J].郑州大学学报(工学版),2011,32(01):1.[doi:10.3969/j.issn.1671-6833.2011.01.001]
[3]陈淮,王晓峰,李静斌,等.横隔板设置对斜交空心板抗扭性能的影响研究[J].郑州大学学报(工学版),2011,32(02):51.[doi:10.3969/j.issn.1671-6833.2011.02.013]
[4]冯庆东,帅健,许葵,等.220t矿用自卸汽车动力学研究[J].郑州大学学报(工学版),2011,32(06):83.[doi:10.3969/j.issn.1671-6833.2011.06.020]
[5]王艳,谷定宇,陈淮..连续多跨矮塔斜拉桥力学性能分析[J].郑州大学学报(工学版),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
[6]惠延波,王宏晓,冯兰芳,等.基于MSC.fatigue的某轻型客车车架疲劳寿命分析[J].郑州大学学报(工学版),2013,34(01):87.[doi:10.3969/j.issn.1671-6833.2013.01.021]
[7]王俊,赵静超,刘立新..预应力度对梁徐变系数与徐变挠度系数数值关系的影响[J].郑州大学学报(工学版),2013,34(05):26.[doi:10.3969/j.issn.1671-6833.2013.05.006]
[8]张洵安,王显彬..软岩隧道开挖与支护的三维有限元仿真分析[J].郑州大学学报(工学版),2008,29(02):137.[doi:10.3969/j.issn.1671-6833.2008.02.035]
　ZHANG Xunan,Wang Xianbin.3D finite element simulation analysis of soft rock tunnel excavation and support[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):137.[doi:10.3969/j.issn.1671-6833.2008.02.035]
[9]张凯,李宇,周燕..刚架拱桥力学性能分析[J].郑州大学学报(工学版),2008,29(04):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]
　ZHANG Kai,LI Yu,Zhou Yan.Analysis of mechanical properties of rigid arch bridges[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]
[10]申哲会,陈淮,胡锋..湛河斜靠式拱桥静力性能分析[J].郑州大学学报(工学版),2009,30(03):22.[doi:10.3969/j.issn.1671-6833.2009.03.006]
　Shen Zhehui,CHEN Huai,Hu Feng.Analysis of static performance of Zhanhe reclining arch bridge[J].Journal of Zhengzhou University (Engineering Science),2009,30(02):22.[doi:10.3969/j.issn.1671-6833.2009.03.006]

更新日期/Last Update: 1900-01-01