[1]周勇军,赵小星,贺拴海,等.弯钢箱梁桥的动力分析及模态试验[J].郑州大学学报(工学版),2005,26(04):20-24.[doi:10.3969/j.issn.1671-6833.2005.04.005]
　Zhou Yongjun,Zhao Xiaoxing,He Jihai,et al.Dynamic analysis and modal test of bent steel box girder bridge[J].Journal of Zhengzhou University (Engineering Science),2005,26(04):20-24.[doi:10.3969/j.issn.1671-6833.2005.04.005]
点击复制

弯钢箱梁桥的动力分析及模态试验()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
26卷
期数:
2005年04期
页码:
20-24
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Dynamic analysis and modal test of bent steel box girder bridge
作者:
周勇军; 赵小星; 贺拴海; 等.
长安大学桥梁与隧道陕西省重点实验室,陕西,西安,710064, 长安大学桥梁与隧道陕西省重点实验室,陕西,西安,710064, 长安大学桥梁与隧道陕西省重点实验室,陕西,西安,710064, 长安大学桥梁与隧道陕西省重点实验室,陕西,西安,710064
Author(s):
Zhou Yongjun; Zhao Xiaoxing; He Jihai; etc
关键词:
桥梁工程;  连续弯箱梁;  梁格法;  模态试验
Keywords:
DOI:
10.3969/j.issn.1671-6833.2005.04.005
文献标志码:
A
摘要:
针对大曲率弯钢箱梁桥的动力特性,通过大型有限元程序分别建立单梁模型、梁格模型及板单元模型,进行了数值仿真分析,同时利用力锤冲击法对室内模型进行了模态试验,并将试验结果与数值分析结果进行对比分析.结果表明,单梁法不适于计算横向模态,普通的梁格法可以较好地模拟弯箱桥竖向和扭转的动力性能,但不应考虑主梁静力计算时横向刚度的换算关系,同时论文提出了一种竖向梁格单元划分法,可以较好地计算弯箱梁结构横向的动力性质,证明梁格法模型可以用于计算该类桥梁的动力特性分析.
Abstract:
According to the dynamic characteristics of the large curvature bending steel box girder bridge, the single girder model, the beam lattice model and the plate element model were established through the large finite element program, and the numerical simulation analysis was carried out, and the modal test of the indoor model was carried out by the force hammer impact method, and the test results were compared with the numerical analysis results. The results show that the single girder method is not suitable for calculating the transverse mode, and the ordinary beam lattice method can better simulate the dynamic performance of the vertical and torsional bent box bridge, but the conversion relationship of the transverse stiffness in the static calculation of the main beam should not be considered.

相似文献/References:

[1]邬晓光,贺攀,何启光,等.陕西省连续箱梁桥底板实测竖向温度梯度研究[J].郑州大学学报(工学版),2019,40(03):13.[doi:10.13705/j.issn.1671-6833.2018.06.006]
　Wu Xiaoguang,He Pan,He Qilong,et al.Study on Measured Vertical Temperature Gradient of Continuous Box Beam Bridge in Shaanxi Province[J].Journal of Zhengzhou University (Engineering Science),2019,40(04):13.[doi:10.13705/j.issn.1671-6833.2018.06.006]
[2]张岗,贺拴海..非稳对流模式下混凝土箱梁内生热场与计算方法[J].郑州大学学报(工学版),2010,31(04):11.[doi:10.3969/j.issn.1671-6833.2010.04.003]
[3]白桦,刘健新,胡庆安..大跨度半拱式异形桥梁抗风性能研究[J].郑州大学学报(工学版),2010,31(05):22.[doi:10.3969/j.issn.1671-6833.2010.05.006]
[4]张俊光,刘永健,姚晓荣,等.刚性悬索加劲钢桁梁桥结构参数敏感性分析[J].郑州大学学报(工学版),2010,31(05):55.[doi:10.3969/j.issn.1671-6833.2010.05.014]
[5]任翔,何青,佟阳,等.混凝土桥塔温度场和空间应力场分析[J].郑州大学学报(工学版),2011,32(02):62.[doi:10.3969/j.issn.1671-6833.2011.02.016]
[6]闫磊,任伟..FRP加固桥梁受弯构件的可靠性分析[J].郑州大学学报(工学版),2011,32(02):80.[doi:10.3969/j.issn.1671-6833.2011.02.020]
[7]吝红育,刘永健,任翔..矩形钢管混凝土桁架静力性能非线性有限元分析[J].郑州大学学报(工学版),2011,32(05):15.[doi:10.3969/j.issn.1671-6833.2011.05.004]
[8]蒋培文,贺拴海,宋一凡,等.多车辆一大跨连续梁桥耦合振动响应分析[J].郑州大学学报(工学版),2011,32(05):91.[doi:10.3969/j.issn.1671-6833.2011.05.023]
[9]高小妮,贺拴海,宋一凡..基于两类结构形式的索梁锚固区力学行为分析[J].郑州大学学报(工学版),2012,33(06):59.[doi:10.3969/j.issn.1671-6833.2012.06.014]
[10]胡圣能..桥梁景观评价的集对分析模型[J].郑州大学学报(工学版),2013,34(04):36.[doi:10.3969/j.issn.1671-6833.2013.04.009]

更新日期/Last Update: 1900-01-01