[1]张洵安,王显彬..软岩隧道开挖与支护的三维有限元仿真分析[J].郑州大学学报(工学版),2008,29(02):137-140144.[doi:10.3969/j.issn.1671-6833.2008.02.035]
 ZHANG Xunan,Wang Xianbin.3D finite element simulation analysis of soft rock tunnel excavation and support[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):137-140144.[doi:10.3969/j.issn.1671-6833.2008.02.035]
点击复制

软岩隧道开挖与支护的三维有限元仿真分析()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
29
期数:
2008年02期
页码:
137-140144
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
3D finite element simulation analysis of soft rock tunnel excavation and support
作者:
张洵安王显彬.
西北工业大学,力学与土木建筑学院,陕西,西安,710072, 西北工业大学,力学与土木建筑学院,陕西,西安,710072
Author(s):
ZHANG Xunan; Wang Xianbin
关键词:
软岩隧道 有限元法 锚喷支护 三维数值模拟
Keywords:
DOI:
10.3969/j.issn.1671-6833.2008.02.035
文献标志码:
A
摘要:
为了验证某国防隧道工程设计和施工方案的可行性.根据地下结构设计理玲和岩石屈服的Drucker-Prager准则,考虑到围岩的自身承栽能力,用ANSYS9.0软件对该隧道的开挖与支护过程进行三维有限元模拟,对设计参数进行验证,对周边围岩变形和初期支护效果进行综合分析,得出结论:该设计方案可行,初期支护满足要求,囤岩能够自行稳定.该数值分析结果与现场实测结果一致,可为相关工程设计和现场施工提供理论指导.
Abstract:
In order to verify the feasibility of a national defense tunnel engineering design and construction scheme. According to the Drucker-Prager criterion of underground structure design and rock yield, considering the self-bearing capacity of the surrounding rock, ANSYS9.0 software was used to simulate the excavation and support process of the tunnel in <>D finite element, verify the design parameters, and comprehensively analyze the deformation and initial support effect of the surrounding rock, and conclude that the design scheme is feasible, the initial support meets the requirements, and the hoard rock can stabilize by itself. The numerical analysis results are consistent with the on-site measurement results, which can provide theoretical guidance for related engineering design and on-site construction.

相似文献/References:

[1]朱小青,陈淮,于品德..支座脱空对西张村大桥受力性能的影响[J].郑州大学学报(工学版),2010,31(05):70.[doi:10.3969/j.issn.1671-6833.2010.05.017]
[2]陈淮,申哲会,李静斌,等.斜靠式拱桥施工阶段静力性能分析[J].郑州大学学报(工学版),2011,32(01):1.[doi:10.3969/j.issn.1671-6833.2011.01.001]
[3]陈淮,王晓峰,李静斌,等.横隔板设置对斜交空心板抗扭性能的影响研究[J].郑州大学学报(工学版),2011,32(02):51.[doi:10.3969/j.issn.1671-6833.2011.02.013]
[4]冯庆东,帅健,许葵,等.220t矿用自卸汽车动力学研究[J].郑州大学学报(工学版),2011,32(06):83.[doi:10.3969/j.issn.1671-6833.2011.06.020]
[5]王艳,谷定宇,陈淮..连续多跨矮塔斜拉桥力学性能分析[J].郑州大学学报(工学版),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
 WANG Yan,GU Dingyu,CHEN Huai.Mechanics Properties Analysis for Continuous Multi-spanLow Pylon Cable-stayed Bridge[J].Journal of Zhengzhou University (Engineering Science),2012,33(02):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
[6]惠延波,王宏晓,冯兰芳,等.基于MSC.fatigue的某轻型客车车架疲劳寿命分析[J].郑州大学学报(工学版),2013,34(01):87.[doi:10.3969/j.issn.1671-6833.2013.01.021]
 HUI Yan-bo,WANG Hong-xiao,FENG Lan-fang,et al.Fatigue Analysis for Light-bus Frame Based on MSC. fatigue[J].Journal of Zhengzhou University (Engineering Science),2013,34(02):87.[doi:10.3969/j.issn.1671-6833.2013.01.021]
[7]王俊,赵静超,刘立新..预应力度对梁徐变系数与徐变挠度系数数值关系的影响[J].郑州大学学报(工学版),2013,34(05):26.[doi:10.3969/j.issn.1671-6833.2013.05.006]
 WANG Jun,ZHAO Jing-chao,LIU Lin-xin.Numerical Relationship Between Creep Coefficient and Creep Deflection Coefficient of Prestressed Concrete Beams Effected by Partial Pre-stressing Ratios[J].Journal of Zhengzhou University (Engineering Science),2013,34(02):26.[doi:10.3969/j.issn.1671-6833.2013.05.006]
[8]张凯,李宇,周燕..刚架拱桥力学性能分析[J].郑州大学学报(工学版),2008,29(04):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]
 ZHANG Kai,LI Yu,Zhou Yan.Analysis of mechanical properties of rigid arch bridges[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):106.[doi:10.3969/j.issn.1671-6833.2008.04.025]
[9]申哲会,陈淮,胡锋..湛河斜靠式拱桥静力性能分析[J].郑州大学学报(工学版),2009,30(03):22.
 SHEN Zhehui,CHEN Huai,HU Feng.Analysis of Static Performance of Zhanhe Reclining Arch Bridge[J].Journal of Zhengzhou University (Engineering Science),2009,30(02):22.
[10]陈涛,郭院成,谢春庆..平坦地基上山区高填方路堤变形及稳定性分析[J].郑州大学学报(工学版),2009,30(03):39.
 CHEN Tao,GUO Yuancheng,XIE Chunqing.Deformation and Stability Analysis of High-fill Embankment in Mountainous Areas on Flat Foundation[J].Journal of Zhengzhou University (Engineering Science),2009,30(02):39.

更新日期/Last Update: 1900-01-01