[1]马胜钢,郑艳萍,邹杜,等.液控惯性振动系统仿真法研究[J].郑州大学学报(工学版),2002,23(03):60-63.[doi:10.3969/j.issn.1671-6833.2002.03.016]
　Ma Shenggang,Zheng Yanping,Zou Du,et al.Research on simulation method of hydraulic control inertial vibration system[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):60-63.[doi:10.3969/j.issn.1671-6833.2002.03.016]
点击复制

液控惯性振动系统仿真法研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
23
期数:
2002年03期
页码:
60-63
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Research on simulation method of hydraulic control inertial vibration system
作者:
马胜钢; 郑艳萍; 邹杜; 等.
郑州大学机械工程学院,河南,郑州,450002, 华南理工大学网络中心,广东,广州,510641
Author(s):
Ma Shenggang; Zheng Yanping; Zou Du; etc
关键词:
仿真;  液控系统;  数学模型
Keywords:
DOI:
10.3969/j.issn.1671-6833.2002.03.016
文献标志码:
A
摘要:
在对新型的液控惯性振动系统进行仿真时,针对容易出现的数学模型难以建立、仿真程序调试困难等问题,提出了"分段建模,串行仿真"的新方法,分别建立液控系统和机械振动系统模型,把复杂系统分成简单子系统,使系统仿真程序有了较强的通用性和灵活性.实验表明,用上述方法建立起来的仿真模型是合理的,可以作为系统分析的依据.
Abstract:
In simulating the new type of hydraulically controlled inertial vibration system, a new method of "segmented modeling and serial simulation" is proposed in view of the problems that are difficult to establish mathematical models and difficult to debug simulation programs, and the models of hydraulic control systems and mechanical vibration systems are established respectively, and the complex systems are divided into simple subsystems, so that the system simulation program has strong versatility and flexibility. Experiments show that the simulation model established by the above method is reasonable and can be used as the basis for system analysis.

相似文献/References:

[1]许颖聪,夏长高.驱动力矩在驱动转向工况下对操纵稳定性的影响[J].郑州大学学报(工学版),2015,36(06):80.[doi:10.3969/ j. issn.1671 -6833.2015.06.016]
　XIA Changgao,XU Yingcong.Simulation Analysis for the Drive Torque Impact on Vehicle Handling Stability[J].Journal of Zhengzhou University (Engineering Science),2015,36(03):80.[doi:10.3969/ j. issn.1671 -6833.2015.06.016]
[2]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
　HE Zhanshu,CHEN Lei,WANG Wujun,et al.Analysis of Temperature Field for Central Electric Junction Box Based on ABAQUS[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
[3]任万强,胡启宙,王合桢.电力有源滤波器控制器的研究与仿真分析[J].郑州大学学报(工学版),1998,19(04):76.
　Ren Wanqiang,Hu Qiu,Wang Hezheng.Research and simulation analysis of the power of the power controller controller[J].Journal of Zhengzhou University (Engineering Science),1998,19(03):76.
[4]沈宪章,刘晓兰,吴天福,等.具有大纯滞后系统控制算法的研究[J].郑州大学学报(工学版),1997,18(02):14.
　Shen Xianzhang,Liu Xiaolan,Wu Tianfu,et al.Research with the control algorithm of the large pure lag system[J].Journal of Zhengzhou University (Engineering Science),1997,18(03):14.
[5]马胜钢,马胜天.液压系统动态仿真工作中的优化方法[J].郑州大学学报(工学版),1995,16(04):1.
　Ma Shenggang,Ma Shengtian.Optimization method of hydraulic system dynamic simulation work[J].Journal of Zhengzhou University (Engineering Science),1995,16(03):1.
[6]李杰.震害预测仿真系统研究(一)——仿真预测的基本思想[J].郑州大学学报(工学版),1991,12(01):59.
　Li Jie,Research on the Simulation System of Earthquake Dynamics (1) -Basie of simulation prediction[J].Journal of Zhengzhou University (Engineering Science),1991,12(03):59.
[7]常晓林,陆述远.重力坝岩基破坏过程的计算机动态仿真研究[J].郑州大学学报(工学版),1991,12(03):8.
　Chang Xiaolin,Lu Shuyuan,Study on computer dynamic simulation of gravity dam base destruction process[J].Journal of Zhengzhou University (Engineering Science),1991,12(03):8.
[8]周汉,黎翊伟.键槽仿真材料结构模型试验研究[J].郑州大学学报(工学版),1991,12(03):117.
　Zhou Han,Li Yanwei,Trial of key slot simulation material structure model test research[J].Journal of Zhengzhou University (Engineering Science),1991,12(03):117.
[9]李杰.震害预测仿真系统研究(二)——结构仿真参数研究[J].郑州大学学报(工学版),1991,12(04):22.
　Li Jie,Research on the Simulation System of Earthquake Dynamics (2) -The Structural Simulation Parameters Research[J].Journal of Zhengzhou University (Engineering Science),1991,12(03):22.

更新日期/Last Update: 1900-01-01