[1]韩华强,陈生水,王占军,等.母岩变形特性差异对堆石料力学性质的影响[J].郑州大学学报(工学版),2020,41(03):67-71.[doi:10.13705/j.issn.1671-6833.2020.02.017]
　Hanwha StrongChen ShengshuiWang ZhanjunZheng ChengfengFu Hua.Influence of deformation characteristics of mother rock on mechanical properties of rockfill materials[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):67-71.[doi:10.13705/j.issn.1671-6833.2020.02.017]
点击复制

母岩变形特性差异对堆石料力学性质的影响()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
41
期数:
2020年03期
页码:
67-71
栏目:
出版日期:
2020-07-29

文章信息/Info

Title:
Influence of deformation characteristics of mother rock on mechanical properties of rockfill materials
作者:
韩华强; 陈生水; 王占军; 郑澄锋; 傅华
1. 南京水利科学研究院水文水资源与水利工程国家重点实验室2. 长江勘测规划设计研究院3. 武汉大学水资源与水电工程科学国家重点实验室
Author(s):
Hanwha Strong1Chen Shengshui1Wang Zhanjun2; 3Zheng Chengfeng1Fu Hua1
1. State Key Laboratory of Hydrology, Water Resources and Hydraulic Engineering, Nanjing Institute of Hydraulic Sciences2. Yangtze River Survey, Planning and Design Institute3. State Key Laboratory of Water Resources and Hydropower Engineering, Wuhan University
关键词:
堆石料' target="_blank" rel="external">">堆石料; 母岩; 变形特性; 力学性质; 影响; 
Keywords:
rockfill' target="_blank" rel="external">">rockfill; host rock; deformation characteristics; mechanical properties; Effect; 
DOI:
10.13705/j.issn.1671-6833.2020.02.017
文献标志码:
A
摘要:
强度及变形特性是反映母岩力学性质的两个基本指标，针对当前研究中很少甚至忽略母岩变形特性对堆石料力学性质的影响，采用大型静力三轴仪及大型渗透仪，分别进行了2种堆石料三轴试验和渗透试验，得到了不同岩性堆石料强度、变形和渗透特性的变化规律，初步分析了母岩变形特性差异对堆石料力学性质的影响机制。试验结果表明：母岩单轴抗压强度相同条件下不同堆石料的强度并不相同，母岩的变形特性对堆石料的力学特性同样具有重要影响，主要表现在强度及变形特性，对于堆石料渗透特性的影响则相对较小；影响机制主要体现在颗粒破碎和剪缩两个方面；堆石料的初始变形指标与母岩的变形指标具有正相关的关系，在剪切起始阶段，母岩变形指标越大，堆石料的强度增长越迅速，同等应变条件下，堆石料的强度也越大，但累积体积变形量及颗粒破碎量均相对较小；随着应变发展，当达到一定应力水平时，母岩变形指标相对较小的堆石料由于剪缩作用而累积了相对较大的体积变形，堆石料强度增长变缓的趋势相对较小，而变形指标大的堆石料颗粒破碎量显著增加，堆石料的强度增长相对变缓，母岩变形指标低反而有可能获得较大的峰值强度。建议应从母岩强度和变形特性两个方面研究母岩对堆石料力学特性的影响。
Abstract:
Strength and deformation characteristics are two basic indexes that reflect the mechanical properties of mother rock. But the influence of mother rock deformation on the mechanical properties of rockfill is seldom or even neglected in present studies. Based on the large-scale static three axis instrument and the large permeability apparatus, the triaxial tests and permeability tests were carried on two kinds of rockfill materials. Finally, the variations of strength, deformation and permeability characteristics with different lithological rockfill materials were obtained, and the influence mechanisms of deformation characteristics of mother rock on mechanical properties of rockfill materials were preliminary analyzed. The result shows that the deformation characteristics of mother rock also play an important role in the mechanical properties of rockfill materials, namely, the influence of mother rock on the mechanical properties of rockfill materials mainly lies in the strength and deformation characteristics, while the influence on permeability characteristics of rockfill is relatively small. The strength of different rockfill materials is not the same even though the mother rocks under the same uniaxial compressive strength. The influence mechanism of deformation characteristics of mother rock on the mechanical properties of rockfill materials is mainly reflected in two aspects: particle crushing and shear shrinkage. The initial deformation index of rockfill materials has a positive correlation with the deformation index of the mother rock, and in the initial stage of shearing, the more the deformation index of mother rock, the faster and the greater the strength of rockfill materials under the same strain condition, while the cumulative volume deformation and particle breakage are relatively small. With the development of rockfill strain, when a certain stress level is reached, rockfill materials with relatively small deformation index of the mother rock accumulated a relatively large volume deformation due to the shear shrinkage, which lead a slow tendency of rockfill materials strength growth is relatively small. While the crushing amount of rockfill materials with large deformation index increases significantly, and lead a relatively slow growth of rockfill strength. It is possible to obtain a larger peak strength even the deformation index of mother rock is low. Research conclusions indicate that the influence of mother rock on the mechanical properties of rockfill should be studied from two aspects of strength and deformation characteristics

相似文献/References:

[1]左敏,徐泽龙,张青川,等.基于双维度中文语义分析的食品领域知识库问答[J].郑州大学学报(工学版),2020,41(03):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
　Zuo Min,Xu Zelong,Zhang Qingchuan,et al.A question answering model over food domain knowledge base from two-dimensional Chinese semantic analysis[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
[2]张三川,苗帅宾.基于热仿真的动力电池箱结构紧凑化参数优化[J].郑州大学学报(工学版),2020,41(03):37.[doi:10.13705/j.issn.1671-6833.2019.05.020]
　Zhang Sanchuan,Miao Shuaibin.Research on Structural Parameter Design Based on Thermal Simulation for High Density Displacement Power Battery Box[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):37.[doi:10.13705/j.issn.1671-6833.2019.05.020]
[3]乐金朝,张世兴,乐明静,等.不同损伤度和愈合温度条件下沥青胶浆自愈合行为研究[J].郑州大学学报(工学版),2020,41(04):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
　YUE Jinchao,ZHANG Shixing,YUE Mingjing,et al.Study on Self-healing Behavior of Asphalt Mastic under Different Damage Degree and Healing Temperature[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
[4]欧阳海滨,全永彬,高立群,等.基于混合遗传粒子群优化算法的层次路径规划方法[J].郑州大学学报(工学版),2020,41(04):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
　OUYANG Haibin,QUAN Yongbin,GAO Liqun,et al.Hierarchical Path Planning Method for Mobile Robots Based on Hybrid Genetic Particle Swarm Optimization Algorithm[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
[5]王丙琛,司怀伟,谭国真.基于深度强化学习的自动驾驶车控制算法研究[J].郑州大学学报(工学版),2020,41(04):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
　WANG Bingchen,SI Huaiwei,TAN Guozhen.Research on Autopilot Control Algorithms Based on Deep Reinforcement Learning[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
[6]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
　HE Zhanshu,CHEN Lei,WANG Wujun,et al.Analysis of Temperature Field for Central Electric Junction Box Based on ABAQUS[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
[7]徐刚,梁帅,刘武发,等.流动聚焦型微流控芯片微通道结构优化[J].郑州大学学报(工学版),2020,41(04):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
　XU Gang,LIANG Shuai,LIU Wufa,et al.Optimization of Micro-channel Structure of Flow Focusing Microfluidic Chip[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
[8]邹卫华,刘鹏磊,刘秋节,等.磁性活性炭对水体中磺胺嘧啶钠的吸附机理研究[J].郑州大学学报(工学版),2020,41(04):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
　ZOU Weihua,LIU Penglei,LIU Qiujie,et al.Investigation into the Adsorption Mechanism of Sulfadiazine Sodium in Aqueous Solution Using Magnetic Biochar[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
[9]严亚丹,李杨,仝佩.基于修正通行能力的出入口位置优化方法[J].郑州大学学报(工学版),2020,41(04):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]
　YAN Yadan,LI Yang,TONG Pei.Optimization Method of Road Access Location Based on Modified Capacity[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]
[10]王复明,何 航,方宏远,等.交通和运行荷载耦合作用下管道承插口力学响应研究[J].郑州大学学报(工学版),2020,41(04):1.[doi:10.13705/j.issn.1671-6833.2020.01.012]
　WANG Fuming,HE Hang,FANG Hongyuan,et al.Mechanical Analysis of The bell-and-spigot Joints of Pipeline Under The Coupling of Traffic and Running Load[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):1.[doi:10.13705/j.issn.1671-6833.2020.01.012]

更新日期/Last Update: 2020-07-29