[1]张三川,苗帅宾.基于热仿真的动力电池箱结构紧凑化参数优化[J].郑州大学学报(工学版),2020,41(03):37-41.[doi:10.13705/j.issn.1671-6833.2019.05.020]
 Zhang Sanchuan,Miao Shuaibin.Research on Structural Parameter Design Based on Thermal Simulation for High Density Displacement Power Battery Box[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):37-41.[doi:10.13705/j.issn.1671-6833.2019.05.020]
点击复制

基于热仿真的动力电池箱结构紧凑化参数优化()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
41卷
期数:
2020年03期
页码:
37-41
栏目:
出版日期:
2020-07-29

文章信息/Info

Title:
Research on Structural Parameter Design Based on Thermal Simulation for High Density Displacement Power Battery Box
作者:
张三川苗帅宾
郑州大学机械与动力工程学院
Author(s):
Zhang SanchuanMiao Shuaibin
School of Mechanical and Power Engineering, Zhengzhou University
关键词:
纯电动汽车' target="_blank" rel="external">">纯电动汽车动力电池箱紧凑化设计流道参数热仿真分析
Keywords:
pure electric vehiclesPower battery boxCompact designrunner parametersThermal simulation analysis
DOI:
10.13705/j.issn.1671-6833.2019.05.020
文献标志码:
A
摘要:
为解决电动汽车动力电池箱内部电池模块的紧凑化布置设计问题,提出一种高密度错位排列新型模块化动力电池箱,采用热仿真方法研究了自然风2.5m/s情况下电池模块间形成流道的尺寸参数(列距、行距、边距、出入口直径)与电池箱内散热效果之间关系,确定了电池箱初步最佳结构参数;同时拟合得到最高温度、最高温差与电池箱内部布置结构特征尺寸的设计公式,验证发现设计公式计算结果与热仿真结果误差小于5%,满足工程需要;并进行后排电池的局部边距尺寸优化与电池箱圆角数目与半径优化;采用最终优化结构参数的电池箱(Di=120mm),电池箱最高温度下降8.77%,最大温差下降3.88%,32.5℃以上高温区面积ST32.5下降65.68%,ST30下降60.77%;冷却风风速增大为15m/s时,最高温度下降为28.62℃,最大温差小于5℃
Abstract:
In order to solve the problem of compact layout design of the internal battery module of electric vehicle battery enclosure, the thermal simulation method was used to study the dimensional parameters (column distance, line spacing, margin, entrance and exit diameter) of the flow channel formed between the battery modules and the heat dissipation effect in the battery enclosure. The relationship between the highest temperature, the highest temperature difference and the characteristic dimensions of the internal arrangement of the battery box is established. The application example shows that the error between the calculation result of the compact design formula and the thermal simulation result is less than 5%, which meets the engineering needs and can guide related research. The size of the margin of the local battery box is optimized; the number and radius of the rounded corners of the battery box are optimized. When the battery box adopts the final optimized structural parameters (Di=120mm), the maximum temperature of the battery box drops by 8.77%, the maximum temperature difference decreases by 3.88%,the area of high temperature area above 32.5 °C ST32.5 decreased by 65.68%,, and the ST30 decreases by 60.77%. When cooled by 15m/s wind speed, the maximum temperature dropped to 28.63 °C, and the maximum temperature difference was less than 5 °C.

相似文献/References:

[1]左敏,徐泽龙,张青川,等.基于双维度中文语义分析的食品领域知识库问答[J].郑州大学学报(工学版),2020,41(03):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
 Zuo Min,Xu Zelong,Zhang Qingchuan,et al.A question answering model over food domain knowledge base from two-dimensional Chinese semantic analysis[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
[2]韩华强,陈生水,王占军,等.母岩变形特性差异对堆石料力学性质的影响[J].郑州大学学报(工学版),2020,41(03):67.[doi:10.13705/j.issn.1671-6833.2020.02.017]
 Hanwha StrongChen ShengshuiWang ZhanjunZheng ChengfengFu Hua.Influence of deformation characteristics of mother rock on mechanical properties of rockfill materials[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):67.[doi:10.13705/j.issn.1671-6833.2020.02.017]
[3]乐金朝,张世兴,乐明静,等.不同损伤度和愈合温度条件下沥青胶浆自愈合行为研究[J].郑州大学学报(工学版),2020,41(04):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
 Lejin jinzhao,Zhang Shixing,Le mingjing,et al.Self-healing of Asphalt Mortar with Different Damage and Healing Temperature Conditions[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
[4]欧阳海滨,全永彬,高立群,等.基于混合遗传粒子群优化算法的层次路径规划方法[J].郑州大学学报(工学版),2020,41(04):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
 Ouyang Seashore,Jeon Yong BinGao LiqunZou Dexuan.SI5 Global hierarchical path planning of mobile robot based on hybrid genetic particle swarm optimization algorithm[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
[5]王丙琛,司怀伟,谭国真.基于深度强化学习的自动驾驶车控制算法研究[J].郑州大学学报(工学版),2020,41(04):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
 Wang Bingchen,Si Huaiwei,Tan Guozhen.Research on Autopilot Control Algorithms Based on Deep Reinforcement Learning[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
[6]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
 He Zhanshu,Chen Lei,Wang Wujun,et al.Temperature Rise Simulation and Experimental Research of Central Electric Junction Box[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
[7]徐刚,梁帅,刘武发,等.流动聚焦型微流控芯片微通道结构优化[J].郑州大学学报(工学版),2020,41(04):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
 Xu GangLiang ShuaiLiu WufaZheng Peng.Optimization of Micro-channel Structure of Flow Focusing Microfluidic Chip[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
[8]邹卫华,刘鹏磊,刘秋节,等.磁性活性炭对水体中磺胺嘧啶钠的吸附机理研究[J].郑州大学学报(工学版),2020,41(04):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
 Zou Weihua,Liu Penglei,Liu Qiu jie,et al.Investigation into the adsorption mechanism of sulfadiazine sodium in aqueous solution using magnetic biochar[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
[9]严亚丹,李杨,仝佩.基于修正通行能力的出入口位置优化方法[J].郑州大学学报(工学版),2020,41(04):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]
 Yan Yadan,Li Yang,Tong Pei.Optimization Method of Access Location Based on Modified Capacity[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]
[10]王复明,何 航,方宏远,等.交通和运行荷载耦合作用下管道承插口力学响应研究[J].郑州大学学报(工学版),2020,41(04):1.[doi:10.13705/j.issn.1671-6833.2020.01.012]
 Wang Fuming,He Hang,Fang Hongyuan,et al.Mechanical Analysis of The bell-and-spigot Joints of Pipeline Under The Coupling of Traffic and Running Load[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):1.[doi:10.13705/j.issn.1671-6833.2020.01.012]

更新日期/Last Update: 2020-07-29