[1]叶元烈,刘臻华,秦东晨.压板机构的优化设计[J].郑州大学学报(工学版),1997,18(03):24-27.
　Ye Yuanlie,Liu Zhenhua,Qin Dongchen.Optimized design of the pressure plate mechanism[J].Journal of Zhengzhou University (Engineering Science),1997,18(03):24-27.
点击复制

压板机构的优化设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
18
期数:
1997年03期
页码:
24-27
栏目:
出版日期:
1997-07-30

文章信息/Info

Title:
Optimized design of the pressure plate mechanism
作者:
叶元烈; 刘臻华; 秦东晨
郑州工业大学机械系
Author(s):
Ye Yuanlie;  Liu Zhenhua;  Qin Dongchen
Department of Machinery Department of Zhengzhou University of Technology
关键词:
压板机构; 复合形法; 多级优化
Keywords:
Plate -board mechanism;  composite method;  multi -level optimization
文献标志码:
A
摘要:
本文针对服装整体熨烫机的压板机构进行了分析，并完成该机构的优化设计，机构的优化设计使用了复合形法，采用多级优化技术，得到了满意的结果，为结构设计提供了合理、可靠的数据。
Abstract:
This article analyzes the pressure mechanism of the overall ironing machine of the clothing, and completes the optimized design of the agency. The optimization design of the organization uses a composite method. It uses multi -level optimization technology to obtain satisfactory results and provides reasonable and reliable data for structural design.

相似文献/References:

[1]华绍杰,付少敏,郭红,等.内置毛细管节流的动静压滑动轴承有限元──优化综合分析[J].郑州大学学报(工学版),1996,17(04):1.
　Hua Shaojie,Fu Shaomin,Guo Hong,et al.Dynamic static pressure sliding bearing finite element built -in capacity of capillary -optimize comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):1.
[2]李大磊,覃寿同,马胜钢,等.皮革削匀机供料机构优化设计[J].郑州大学学报(工学版),1996,17(04):58.
　Li Dalei,Qin Shoutong,Ma Shenggang,et al.Optimization design[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):58.
[3]岑少起,李伟,华绍杰,等.周向进油、浅腔节流的动静压滑动轴承的有限元－优化综合分析[J].郑州大学学报(工学版),1996,17(02):28.
　Cen Shaoqi,Li Wei,Hua Shaojie,et al.Zhou Xiangjin, shallow cavity throwing dynamic static pressure sliding bearing of the finite element -optimized comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):28.

备注/Memo

备注/Memo:
作者
更新日期/Last Update: 1900-01-01