[1]岑少起,李伟,华绍杰,等.周向进油、浅腔节流的动静压滑动轴承的有限元－优化综合分析[J].郑州大学学报(工学版),1996,17(02):28-36.
　Cen Shaoqi,Li Wei,Hua Shaojie,et al.Zhou Xiangjin, shallow cavity throwing dynamic static pressure sliding bearing of the finite element -optimized comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):28-36.
点击复制

周向进油、浅腔节流的动静压滑动轴承的有限元－优化综合分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17卷
期数:
1996年02期
页码:
28-36
栏目:
出版日期:
1996-02-28

文章信息/Info

Title:
Zhou Xiangjin, shallow cavity throwing dynamic static pressure sliding bearing of the finite element -optimized comprehensive analysis
作者:
岑少起; 李伟; 华绍杰; 李瑞珍; 夏恒青
郑州工学院机械系
Author(s):
Cen Shaoqi;  Li Wei;  Hua Shaojie;  Li Ruizhen;  Xia Hengqing
Department of Machinery Department of Zhengzhou Institute of Technology
关键词:
动静压滑动轴承; 复合形法; 有限元分析; 浅腔; 封油边
Keywords:
Dynamic static pressure sliding bearing;  composite form method;  finite element analysis;  shallow cavity;  sealed oil edge
文献标志码:
A
摘要:
本文讨论一种只靠浅腔节流的动静压轴承并对此进行了有限元分析和优化计算，建立了有限元－优化迭代的计算模型，编制了计算机程序，给出了主要设计参数的优化结果和该节流形式的相当节流比．
Abstract:
This article discusses a dynamic pressure bearing that only rely on shallow cavity to save and calculates the finite element analysis and optimization calculation. The calculation model of the finite element -optimized iterative iteration is established, and the computer program is compiled.

相似文献/References:

[1]何予鹏,华绍杰,徐波,等.高速动静压与滚动混合轴承的研究[J].郑州大学学报(工学版),1998,19(03):47.
　He Yupeng,Hua Shaojie,Xu Bo,et al.Research on high -speed static pressure and rolling hybrid bearing[J].Journal of Zhengzhou University (Engineering Science),1998,19(02):47.
[2]叶元烈,刘臻华,秦东晨.压板机构的优化设计[J].郑州大学学报(工学版),1997,18(03):24.
　Ye Yuanlie,Liu Zhenhua,Qin Dongchen.Optimized design of the pressure plate mechanism[J].Journal of Zhengzhou University (Engineering Science),1997,18(02):24.
[3]李大磊,覃寿同,马胜钢,等.皮革削匀机供料机构优化设计[J].郑州大学学报(工学版),1996,17(04):58.
　Li Dalei,Qin Shoutong,Ma Shenggang,et al.Optimization design[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):58.
[4]华绍杰,付少敏,郭红,等.内置毛细管节流的动静压滑动轴承有限元──优化综合分析[J].郑州大学学报(工学版),1996,17(04):1.
　Hua Shaojie,Fu Shaomin,Guo Hong,et al.Dynamic static pressure sliding bearing finite element built -in capacity of capillary -optimize comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):1.

更新日期/Last Update: 1900-01-01