[1]徐建国,王博..渡槽结构动力性能的有限元分析[J].郑州大学学报(工学版),1999,20(02):67-69.[doi:10.3969/j.issn.1671-6833.1999.02.022]
 Xu Jianguo,Wang Bo.Finite element analysis of dynamic properties of aqueduct structures[J].Journal of Zhengzhou University (Engineering Science),1999,20(02):67-69.[doi:10.3969/j.issn.1671-6833.1999.02.022]
点击复制

渡槽结构动力性能的有限元分析()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20
期数:
1999年02期
页码:
67-69
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Finite element analysis of dynamic properties of aqueduct structures
作者:
徐建国王博.
郑州工业大学水利及环境工程学院,河南郑州,450002
Author(s):
Xu Jianguo; Wang Bo
关键词:
渡槽 有限元 模态 地震响应
Keywords:
DOI:
10.3969/j.issn.1671-6833.1999.02.022
文献标志码:
A
摘要:
为分析南水北调水利工程某渡槽的结构动力性能,以便对工程设计提供有力支持,采用8结点空间块体单元对渡槽进行有限元离散.借助SAP 93有限元分析软件,对该渡槽进行4种工况(槽内无水、槽内有水、渡槽无伸缩缝、渡槽有伸缩缝)下的模态分析及地震荷载作用下的动力响应时程计算.结果表明:在无水情况下,无伸缩缝时的各阶频率均大于有伸缩缝时对应的各阶频率;在渡槽有水情况下也有同样的结果.对于具有相同结构的渡槽,无水时的各阶频率均大于有水时相应的各阶频率.
Abstract:
In order to analyze the structural dynamic performance of an aqueduct in the South-to-North Water Diversion Project, so as to provide strong support for the engineering design, the finite element discretization of the aqueduct was carried out by using 8-node space block units. With the help of SAP 93 finite element analysis software, the modal analysis of the aqueduct under four working conditions (no water in the tank, water in the tank, no expansion joint in the aqueduct, and expansion joint in the aqueduct) and the calculation of the dynamic response time history under seismic load were carried out. The results show that in the absence of water, the frequency of each order without expansion joint is greater than the corresponding frequency of each order when there is expansion joint. The same result is true when there is water in the aqueduct. For aqueducts with the same structure, the frequency of each order in the absence of water is greater than the corresponding frequency of each order when there is water.

相似文献/References:

[1]莫石秀,郭月芹..隔热板埋深对冻土路基温度场的影响分析[J].郑州大学学报(工学版),2010,31(03):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
 Mo Shixiu,Guo Yueqin.Analysis of the influence of buried depth of heat insulation board on the temperature field of frozen soil subgrade[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
[2]张军,张恒,张洛明,等.基于接触的销钉孔塑性变形分析[J].郑州大学学报(工学版),2010,31(04):81.[doi:10.3969/j.issn.1671-6833.2010.04.020]
[3]王博,徐建国,任克彬,等.考虑流固耦合的渡槽结构半主动控制研究[J].郑州大学学报(工学版),2010,31(04):89.[doi:10.3969/j.issn.1671-6833.2010.04.022]
[4]张俊光,刘永健,姚晓荣,等.刚性悬索加劲钢桁梁桥结构参数敏感性分析[J].郑州大学学报(工学版),2010,31(05):55.[doi:10.3969/j.issn.1671-6833.2010.05.014]
[5]李清富,辛保兵,李科..基于SVM的预应力混凝土梁有效预应力识别[J].郑州大学学报(工学版),2011,32(01):18.[doi:10.3969/j.issn.1671-6833.2011.01.005]
[6]雷少敏,唐华平,朱维南..3ZX平面铣床横梁有限元分析及优化研究[J].郑州大学学报(工学版),2011,32(03):60.[doi:10.3969/j.issn.1671-6833.2011.03.015]
[7]周灿,王建军,邓圭玲..高速机床恒定循环水温暖机的仿真与实验研究[J].郑州大学学报(工学版),2011,32(05):121.[doi:10.3969/j.issn.1671-6833.2011.05.030]
[8]李成,朱红红,铁瑛,等.销钉连接接触面的应力有限元计算与分析[J].郑州大学学报(工学版),2012,33(01):84.[doi:10.3969/j.issn.1671-6833.2012.01.021]
 LI Cheng,ZHU Honghong,TIE Ying,et al.Stress Calculation and Analysis of Connection Interface of Pin Joints with FEM[J].Journal of Zhengzhou University (Engineering Science),2012,33(02):84.[doi:10.3969/j.issn.1671-6833.2012.01.021]
[9]吴梦喜,邓琴芳,黄艳北..堤基管涌动态发展的数值模拟[J].郑州大学学报(工学版),2012,33(05):66.[doi:10.3969/j.issn.1671-6833.2012.05.015]
 WU Mengxi,DENG Qinfang,HUANG Yanbei.Numerical Simulation of the Dynamic Process of Levee Foundation Piping[J].Journal of Zhengzhou University (Engineering Science),2012,33(02):66.[doi:10.3969/j.issn.1671-6833.2012.05.015]
[10]韩增盛,马松花..地铁车辆吸能装置耐碰撞性分析[J].郑州大学学报(工学版),2012,33(06):41.[doi:10.3969/j.issn.1671-6833.2012.06.010]
 HAN Zengsheng,MA Songhua.Analysis of Crashworthiness of Energy-Absorbing Componentin the Metro Vehicle Car-body[J].Journal of Zhengzhou University (Engineering Science),2012,33(02):41.[doi:10.3969/j.issn.1671-6833.2012.06.010]

更新日期/Last Update: 1900-01-01