[1]周兵,钱德沛.YK7163磨齿机数控系统的实现[J].郑州大学学报(工学版),1997,18(01):115-118.
　Zhou Bing,Qian Depei.The implementation of YK7163 tooth grinding machine CNC system[J].Journal of Zhengzhou University (Engineering Science),1997,18(01):115-118.
点击复制

YK7163磨齿机数控系统的实现()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
18卷
期数:
1997年01期
页码:
115-118
栏目:
出版日期:
1997-07-28

文章信息/Info

Title:
The implementation of YK7163 tooth grinding machine CNC system
作者:
周兵; 钱德沛
郑州工业大学计自系
Author(s):
Zhou Bing;  Qian Depei
Zhengzhou University of Technology
关键词:
数控机床; 齿轮
Keywords:
CNC machine tool;  gear
文献标志码:
A
摘要:
本文介绍ＹＫ７１６３磨齿机数控系统的硬件、软件的设计与实现，数控语言Ｇ代码的定义与应用
Abstract:
This article introduces the design and implementation of the hardware and software of the CNC system of the YK7163 tooth grinding machine, the definition and application of the CNC language G code

相似文献/References:

[1]王洪明郝旺身韩捷.基于LMD和样本熵的齿轮故障特征提取方法研究[J].郑州大学学报(工学版),2015,36(03):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
　WANG Hong-min,HAO Wang-shen,HAN Jie,et al.Research on Gear Fault Feature ExtractionBased on LMD and Sample Entropy[J].Journal of Zhengzhou University (Engineering Science),2015,36(01):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
[2]刘竹丽,陈赟,王祝新.齿面残余应力对齿轮轮齿弯曲疲劳寿命的影响分析[J].郑州大学学报(工学版),2020,41(03):53.[doi:10.13705/j.issn.1671-6833.2019.02.013]
　Liu Zhuli,Chen Yun,Wang Zhuxin.The analysis of the residual stress of tooth surfaces influence on the flexural fatigue life of gear tooth[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):53.[doi:10.13705/j.issn.1671-6833.2019.02.013]
[3]刘景艳,李玉东,杨晓邦..遗传神经网络在齿轮故障诊断中的应用[J].郑州大学学报(工学版),2012,33(03):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
　LIU Jingyan,LI Yudong,YANG Xiaobang.Application of Genetic Neural Network to Gear Fault Diagnosis[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
[4]冯伟,谢小鹏,刘粲..齿轮磨损试验光谱油样分析及建模研究[J].郑州大学学报(工学版),2009,30(04):76.
　FENG Wei,XIE Xiaopeng,LIU Yu.Spectrographic Oil Analysis of and Modeling Study on Gear Wear Test[J].Journal of Zhengzhou University (Engineering Science),2009,30(01):76.
[5]冯澄宙.渐开线圆柱齿轮承载能力计算程序的应用[J].郑州大学学报(工学版),1988,9(04):98.
　[J].Journal of Zhengzhou University (Engineering Science),1988,9(01):98.
[6]周兵.YK7163数控磨齿机的修形算法研究[J].郑州大学学报(工学版),1996,17(03):107.
　Zhou soldiers.Research on the repair algorithm of YK7163 CNC tooth grinding machine[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):107.

备注/Memo

备注/Memo:
作者
更新日期/Last Update: 1900-01-01