[1]刘竹丽,陈赟,王祝新.齿面残余应力对齿轮轮齿弯曲疲劳寿命的影响分析[J].郑州大学学报(工学版),2020,41(03):53-56.[doi:10.13705/j.issn.1671-6833.2019.02.013]
　Liu Zhuli,Chen Yun,Wang Zhuxin.The analysis of the residual stress of tooth surfaces influence on the flexural fatigue life of gear tooth[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):53-56.[doi:10.13705/j.issn.1671-6833.2019.02.013]
点击复制

齿面残余应力对齿轮轮齿弯曲疲劳寿命的影响分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
41
期数:
2020年03期
页码:
53-56
栏目:
出版日期:
2020-07-29

文章信息/Info

Title:
The analysis of the residual stress of tooth surfaces influence on the flexural fatigue life of gear tooth
作者:
刘竹丽1; 陈赟1; 王祝新2
1. 郑州大学机械与动力工程学院;2. 中航光电股份有限公司
Author(s):
Liu Zhuli 1; Chen Yun 1; Wang Zhuxin 2
1. School of Mechanical and Power Engineering, Zhengzhou University; 2. Zhonghang Optoelectronics Co., Ltd.
关键词:
齿轮; ANSYS; 弯曲强度; 疲劳寿命
Keywords:
gear; ANSYS; Bending strength; fatigue life
DOI:
10.13705/j.issn.1671-6833.2019.02.013
文献标志码:
A
摘要:
以ANSYS有限元软件为工具，通过对齿轮施加预应力来模拟渗碳淬火齿轮的残余压应力。由于残余压应力大小随材料深度而变化，故对轮齿表层进行分层建立，便于各深度层残余压应力的模拟施加，并在相同的载荷工况下，对由渗碳淬火而产生残余压应力齿轮和不存在残余压应力齿轮，分别进行了弯曲强度和弯曲疲劳寿命分析，以研究残余压应力对齿轮弯曲强度以及疲劳寿命的影响作用。通过结果对比分析表明，残余压应力可使齿轮弯曲抗疲劳性能得到提高。
Abstract:
ANSYS finite element software is used as a tool to simulate the compressive residual stress of carburizing and quenching gear by applying prestress to gear. Since the compressive residual stress varies with the depth of material, in order to facilitate the simulation of the compressive residual stress in each layer by layering the surface layer of gear teeth. Under the same load conditions, the compressive residual stress gear produced by carburizing and quenching and the absence of compressive residual stress gear are respectively analyzed for flexural strength and fatigue life, in order to study the compressive residual stress’s influence on flexural strength and fatigue life of gear. The results of the analysis show that the compressive residual stress can make gear flexural fatigue resistance improved

相似文献/References:

[1]刘竹丽赵敏敏马朋朋.基于ANSYS的斜齿轮副接触分析与可靠性分析[J].郑州大学学报(工学版),2015,36(02):6.[doi:10.3969/ j. issn.1671 -6833.2015.02.002]
　LIU Zhu-li,ZHAO Min-min,MA Peng-peng,et al.Large Helical Gears Contact Analysis and Contact StrengthReliability Analysis Based on ANSYs[J].Journal of Zhengzhou University (Engineering Science),2015,36(03):6.[doi:10.3969/ j. issn.1671 -6833.2015.02.002]
[2]王洪明郝旺身韩捷.基于LMD和样本熵的齿轮故障特征提取方法研究[J].郑州大学学报(工学版),2015,36(03):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
　WANG Hong-min,HAO Wang-shen,HAN Jie,et al.Research on Gear Fault Feature ExtractionBased on LMD and Sample Entropy[J].Journal of Zhengzhou University (Engineering Science),2015,36(03):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
[3]周浩,刘竹丽,侯东红.QT280拖挂式牵引机牵引轮结构分析与优化[J].郑州大学学报(工学版),2016,37(01):79.[doi:10.3969/j.issn.1671-6833.201411034]
　Liu Zhuli,Zhou Hao,Hou Donghong.Finite Element Analysis and Optimization of QT280 Trailer-Tractor Entry Capstan[J].Journal of Zhengzhou University (Engineering Science),2016,37(03):79.[doi:10.3969/j.issn.1671-6833.201411034]
[4]刘景艳,李玉东,杨晓邦..遗传神经网络在齿轮故障诊断中的应用[J].郑州大学学报(工学版),2012,33(03):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
　LIU Jingyan,LI Yudong,YANG Xiaobang.Application of Genetic Neural Network to Gear Fault Diagnosis[J].Journal of Zhengzhou University (Engineering Science),2012,33(03):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
[5]冯伟,谢小鹏,刘粲..齿轮磨损试验光谱油样分析及建模研究[J].郑州大学学报(工学版),2009,30(04):76.
　FENG Wei,XIE Xiaopeng,LIU Yu.Spectrographic Oil Analysis of and Modeling Study on Gear Wear Test[J].Journal of Zhengzhou University (Engineering Science),2009,30(03):76.
[6]周兵,钱德沛.YK7163磨齿机数控系统的实现[J].郑州大学学报(工学版),1997,18(01):115.
　Zhou Bing,Qian Depei.The implementation of YK7163 tooth grinding machine CNC system[J].Journal of Zhengzhou University (Engineering Science),1997,18(03):115.
[7]周兵.YK7163数控磨齿机的修形算法研究[J].郑州大学学报(工学版),1996,17(03):107.
　Zhou soldiers.Research on the repair algorithm of YK7163 CNC tooth grinding machine[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):107.
[8]冯澄宙.渐开线圆柱齿轮承载能力计算程序的应用[J].郑州大学学报(工学版),1988,9(04):98.
　[J].Journal of Zhengzhou University (Engineering Science),1988,9(03):98.

更新日期/Last Update: 2020-07-29