[1]白国长,侯伯杰..机器人的一种鲁棒控制方法[J].郑州大学学报(工学版),2002,23(01):52-54，58.[doi:10.3969/j.issn.1671-6833.2002.01.015]
　Bai Guochang,Berger Hou.A robust control method for robots[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):52-54，58.[doi:10.3969/j.issn.1671-6833.2002.01.015]
点击复制

机器人的一种鲁棒控制方法()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
23
期数:
2002年01期
页码:
52-54，58
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
A robust control method for robots
作者:
白国长; 侯伯杰.
郑州大学机械工程学院,河南,郑州,450002, 郑州大学机械工程学院,河南,郑州,450002
Author(s):
Bai Guochang; Berger Hou
关键词:
机器人;  鲁棒控制;  PDFSV控制
Keywords:
DOI:
10.3969/j.issn.1671-6833.2002.01.015
文献标志码:
A
摘要:
通过对一个三自由度机械手分别采用PID和PDFSV控制,介绍PDFSV方法在机器人位置控制中的运用.改变被控对象各阶系数和加阶跃和正弦干扰仿真,并对其进行理论分析.结果表明:该控制方法设计简单,响应速度快,且无超调,其控制形式适合机器人的需要,其良好的鲁棒性可以弥补机械手的非线性因素和关节间耦合作用.只需位置、速度反馈信号就能完成对位置、速度和加速度的控制.同时控制中计算量小也有利于其实际运用.
Abstract:
By using PID and PDFSV control for a three-degree-of-freedom manipulator, the application of PDFSV method in robot position control is introduced. Simulate the coefficients of each order and the addition step and sinusoidal interference of the controlled object, and analyze them theoretically. The results show that the control method has simple design, fast response speed, and no overshoot, and its control form is suitable for the needs of the robot, and its good robustness can make up for the nonlinear factors and inter-joint coupling of the manipulator. Only position and velocity feedback signals are required to control position, velocity and acceleration. At the same time, the small amount of calculation in the control is also conducive to its practical application.

相似文献/References:

[1]王坤,朱作键..一类含输入和状态时滞的不确定非线性系统的鲁棒控制[J].郑州大学学报(工学版),2012,33(06):27.[doi:10.3969/j.issn.1671-6833.2012.06.007]
　WANG Kun,ZHU Zuojian.Robust Control for a Class of Uncertain Nonlinear Systems with Input and State Delays[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):27.[doi:10.3969/j.issn.1671-6833.2012.06.007]
[2]吴黎明,韩丰田,侯伯杰..静电悬浮系统的离散滑模控制[J].郑州大学学报(工学版),2004,25(03):109.[doi:10.3969/j.issn.1671-6833.2004.03.027]
　Wu Liming,Han Toyota,Berger Hou.Discrete sliding mode control for electrostatic levitation systems[J].Journal of Zhengzhou University (Engineering Science),2004,25(01):109.[doi:10.3969/j.issn.1671-6833.2004.03.027]
[3]陈丰,张振西,苏红,等.机器人动力学模型的程序实现[J].郑州大学学报(工学版),2001,22(02):12.[doi:10.3969/j.issn.1671-6833.2001.02.004]
[4]刘红霞,杨开明,黄明生.机器人握力模糊控制系统[J].郑州大学学报(工学版),1996,17(04):115.
　Liu Hongxia,Yang Kaiming,Huang Mingsheng.Robot grip fuzzy control system[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):115.
[5]曾凡才,李庚田.空间机器人碳纤维机械臂动态设计的初步优化法[J].郑州大学学报(工学版),1990,11(03):11.
　Zeng Fancai,Li Gengtian,Preliminary optimization method of space robotic carbon fiber robotic arm dynamic design[J].Journal of Zhengzhou University (Engineering Science),1990,11(01):11.
[6]许忠信,陈丰.一种新型的用于空间作业的模块机器人[J].郑州大学学报(工学版),1990,11(03):17.
　Xu Zhongxin,Chen Feng,A new type of module robot for space operation[J].Journal of Zhengzhou University (Engineering Science),1990,11(01):17.
[7]陈丰,曾凡才.“简易空间机器人”机械结构设计[J].郑州大学学报(工学版),1989,10(03):70.
　[J].Journal of Zhengzhou University (Engineering Science),1989,10(01):70.

更新日期/Last Update: 1900-01-01