[1]华绍杰,付少敏,郭红,等.内置毛细管节流的动静压滑动轴承有限元──优化综合分析[J].郑州大学学报(工学版),1996,17(04):1-8.
　Hua Shaojie,Fu Shaomin,Guo Hong,et al.Dynamic static pressure sliding bearing finite element built -in capacity of capillary -optimize comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):1-8.
点击复制

内置毛细管节流的动静压滑动轴承有限元──优化综合分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17
期数:
1996年04期
页码:
1-8
栏目:
出版日期:
1996-04-28

文章信息/Info

Title:
Dynamic static pressure sliding bearing finite element built -in capacity of capillary -optimize comprehensive analysis
作者:
华绍杰; 付少敏; 郭红; 祁建中; 李瑞珍; 夏恒青; 岑少起
郑州工业大学机械工程系，北京航空航天大学
Author(s):
Hua Shaojie;  Fu Shaomin;  Guo Hong;  Qi Jianzhong;  Li Ruizhen;  Xia Hengqing;  Cen Shaoqi
Department of Mechanical Engineering, Zhengzhou University of Technology, Beijing University of Aerospace University
关键词:
动静压滑动轴承; 复合形法; 节流腔; 浅腔
Keywords:
Dynamic and static pressure sliding bearing;  composite form;  throwing cavity;  shallow cavity
文献标志码:
A
摘要:
这里将通常设于外部的扁毛细管节流器移至腔内转动方向的起始处，并通过浅腔再次节流。本文对这种新型结构的动静压滑动轴承进行了全面的有限元分析和优化计算，建立了有限元──优化迭代过程的计算模型，并编制了计算机程序，绘出了几个主要设计参数的优化结果，从而为设计、制造这种轴承提供了依据。
Abstract:
Here, the outer flat hair fine tube throttle throttle is moved to the beginning of the rotation direction in the cavity, and reunited through the shallow cavity. This article conducts a comprehensive finite element analysis and optimization calculation of this new type of dynamic pressure sliding bearing, establishes the finite element -the computing model of optimizing iteration process, and compiles computer program, draws the optimization results of several main design parameters, thereby providing a basis for design and manufacturing.

相似文献/References:

[1]何予鹏,华绍杰,徐波,等.高速动静压与滚动混合轴承的研究[J].郑州大学学报(工学版),1998,19(03):47.
　He Yupeng,Hua Shaojie,Xu Bo,et al.Research on high -speed static pressure and rolling hybrid bearing[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):47.
[2]叶元烈,刘臻华,秦东晨.压板机构的优化设计[J].郑州大学学报(工学版),1997,18(03):24.
　Ye Yuanlie,Liu Zhenhua,Qin Dongchen.Optimized design of the pressure plate mechanism[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):24.
[3]李大磊,覃寿同,马胜钢,等.皮革削匀机供料机构优化设计[J].郑州大学学报(工学版),1996,17(04):58.
　Li Dalei,Qin Shoutong,Ma Shenggang,et al.Optimization design[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):58.
[4]岑少起,李伟,华绍杰,等.周向进油、浅腔节流的动静压滑动轴承的有限元－优化综合分析[J].郑州大学学报(工学版),1996,17(02):28.
　Cen Shaoqi,Li Wei,Hua Shaojie,et al.Zhou Xiangjin, shallow cavity throwing dynamic static pressure sliding bearing of the finite element -optimized comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):28.

更新日期/Last Update: 1900-01-01