[1]马胜钢,马胜天.液压系统动态仿真工作中的优化方法[J].郑州大学学报(工学版),1995,16(04):1-6.
 Ma Shenggang,Ma Shengtian.Optimization method of hydraulic system dynamic simulation work[J].Journal of Zhengzhou University (Engineering Science),1995,16(04):1-6.
点击复制

液压系统动态仿真工作中的优化方法()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
16
期数:
1995年04期
页码:
1-6
栏目:
出版日期:
1995-04-28

文章信息/Info

Title:
Optimization method of hydraulic system dynamic simulation work
作者:
马胜钢马胜天
郑州工学院,中州大学
Author(s):
Ma Shenggang Ma Shengtian
Zhengzhou Institute of Technology, Zhongzhou University
关键词:
目标函数仿真优化
Keywords:
Target function simulation optimization
文献标志码:
A
摘要:
本文着重研究了把液压系统动态仿真与优化技术结合起来,自动寻找系统中各参数之间最佳组合的方法,分析了在应用该方法时所遇到的关键问题,提出了解决的办法,最后给出了一个应用实例。
Abstract:
This article focuses on combining the dynamic simulation of the hydraulic system with the optimization technology, automatically find the best combination of various parameters in the system, analyzes the key problems encountered when applying this method, proposes a solution, and finally gives an application instance.

相似文献/References:

[1]许颖聪,夏长高.驱动力矩在驱动转向工况下对操纵稳定性的影响[J].郑州大学学报(工学版),2015,36(06):80.[doi:10.3969/ j. issn.1671 -6833.2015.06.016]
 XIA Changgao,XU Yingcong.Simulation Analysis for the Drive Torque Impact on Vehicle Handling Stability[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):80.[doi:10.3969/ j. issn.1671 -6833.2015.06.016]
[2]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
 HE Zhanshu,CHEN Lei,WANG Wujun,et al.Analysis of Temperature Field for Central Electric Junction Box Based on ABAQUS[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
[3]马胜钢,郑艳萍,邹杜,等.液控惯性振动系统仿真法研究[J].郑州大学学报(工学版),2002,23(03):60.[doi:10.3969/j.issn.1671-6833.2002.03.016]
 Ma Shenggang,Zheng Yanping,Zou Du,et al.Research on simulation method of hydraulic control inertial vibration system[J].Journal of Zhengzhou University (Engineering Science),2002,23(04):60.[doi:10.3969/j.issn.1671-6833.2002.03.016]
[4]任万强,胡启宙,王合桢.电力有源滤波器控制器的研究与仿真分析[J].郑州大学学报(工学版),1998,19(04):76.
 Ren Wanqiang,Hu Qiu,Wang Hezheng.Research and simulation analysis of the power of the power controller controller[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):76.
[5]沈宪章,刘晓兰,吴天福,等.具有大纯滞后系统控制算法的研究[J].郑州大学学报(工学版),1997,18(02):14.
 Shen Xianzhang,Liu Xiaolan,Wu Tianfu,et al.Research with the control algorithm of the large pure lag system[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):14.
[6]李大磊,覃寿同,马胜钢,等.皮革削匀机供料机构优化设计[J].郑州大学学报(工学版),1996,17(04):58.
 Li Dalei,Qin Shoutong,Ma Shenggang,et al.Optimization design[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):58.
[7]李杰.震害预测仿真系统研究(一)——仿真预测的基本思想[J].郑州大学学报(工学版),1991,12(01):59.
 Li Jie,Research on the Simulation System of Earthquake Dynamics (1) -Basie of simulation prediction[J].Journal of Zhengzhou University (Engineering Science),1991,12(04):59.
[8]常晓林,陆述远.重力坝岩基破坏过程的计算机动态仿真研究[J].郑州大学学报(工学版),1991,12(03):8.
 Chang Xiaolin,Lu Shuyuan,Study on computer dynamic simulation of gravity dam base destruction process[J].Journal of Zhengzhou University (Engineering Science),1991,12(04):8.
[9]周汉,黎翊伟.键槽仿真材料结构模型试验研究[J].郑州大学学报(工学版),1991,12(03):117.
 Zhou Han,Li Yanwei,Trial of key slot simulation material structure model test research[J].Journal of Zhengzhou University (Engineering Science),1991,12(04):117.
[10]李杰.震害预测仿真系统研究(二)——结构仿真参数研究[J].郑州大学学报(工学版),1991,12(04):22.
 Li Jie,Research on the Simulation System of Earthquake Dynamics (2) -The Structural Simulation Parameters Research[J].Journal of Zhengzhou University (Engineering Science),1991,12(04):22.

更新日期/Last Update: 1900-01-01