[1]刘敏珊,张丽娜,董其伍..圆盘涡轮式搅拌槽的数值模拟[J].郑州大学学报(工学版),2007,28(01):122-124,128.[doi:10.3969/j.issn.1671-6833.2007.01.031]
　LIU Minshan,ZHANG Lina,Dong Qiwu.Numerical simulation of a disc turbine stirring tank[J].Journal of Zhengzhou University (Engineering Science),2007,28(01):122-124,128.[doi:10.3969/j.issn.1671-6833.2007.01.031]
点击复制

圆盘涡轮式搅拌槽的数值模拟()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
28卷
期数:
2007年01期
页码:
122-124,128
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Numerical simulation of a disc turbine stirring tank
作者:
刘敏珊; 张丽娜; 董其伍.
郑州大学,热能研究中心,河南,郑州,450001, 郑州大学,热能研究中心,河南,郑州,450001, 郑州大学,热能研究中心,河南,郑州,450001
Author(s):
LIU Minshan; ZHANG Lina; Dong Qiwu
关键词:
圆盘涡轮式搅拌器;  数值模拟;  功率准数
Keywords:
DOI:
10.3969/j.issn.1671-6833.2007.01.031
文献标志码:
A
摘要:
用计算流体力学软件FLUENT6.2,多重参考系法对圆盘涡轮式搅拌槽在不同转速下的流动进行了整体数值模拟.采用标准k-ε湍流模型成功模拟了搅拌槽内的流动分布,考察不同搅拌转速和不同计算方法下搅拌桨的功率准数.给出搅拌槽内速度分布和湍流动能分布图.为该领域研究者提供指导.
Abstract:
Using the computational fluid dynamics software FLUENT6.2, the flow of the disc turbine stirring tank at different speeds was carried out by the multiple reference frame method. The flow distribution in the stirring tank was successfully simulated by using the standard K-ε turbulence model, and the power accuracy of the mixing paddle under different stirring speeds and different calculation methods was investigated. The velocity distribution and turbulent flow energy distribution in the stirring tank are given. Provide guidance to researchers in the field.

相似文献/References:

[1]时刚,田新涛.工程卡车行驶引发地面振动特性研究[J].郑州大学学报(工学版),2020,41(05):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
　Shi Gang,Tian Xintao..Research on Ground Vibration Characteristics Caused by Engineering Truck Driving[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
[2]戴逸飞,杨 平,王 宁,等.交叠车站下穿段MJS加固温度场变化规律研究[J].郑州大学学报(工学版),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
　DAI Yifei,YANG Ping,WANG Ning,et al.Study on Temperature Field Variation Law of MJS Reinforcement for Underpass Section of Overlapping Station[J].Journal of Zhengzhou University (Engineering Science),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
[3]王定标,万方方,周俊杰..蒸发式冷凝器异型扁管性能分析及数值模拟[J].郑州大学学报(工学版),2010,31(02):67.[doi:10.3969/j.issn.1671-6833.2010.02.016]
　Wang Dingping,Wanfangfang,Zhou Junjie.Performance analysis and numerical simulation of special-shaped flat tube of evaporative condenser[J].Journal of Zhengzhou University (Engineering Science),2010,31(01):67.[doi:10.3969/j.issn.1671-6833.2010.02.016]
[4]董其伍,王烨,刘敏珊..流动冲击角对流体绕流管束换热的影响[J].郑州大学学报(工学版),2010,31(02):0.[doi:10.3969/j.issn.1671-6833.2010.02.017]
　Dong Qiwu,WANG Ye,Liu Minshan.The effect of flow impact angle on heat transfer around the flow tube bundle[J].Journal of Zhengzhou University (Engineering Science),2010,31(01):0.[doi:10.3969/j.issn.1671-6833.2010.02.017]
[5]王丹,董其伍,刘敏珊..管壳式换热器模块综合模拟方法研究[J].郑州大学学报(工学版),2010,31(03):20.[doi:10.3969/j.issn.1671-6833.2010.03.006]
　WANG Dan,Dong Qiwu,Liu Minshan.Research on comprehensive simulation method of shell and tube heat exchanger module[J].Journal of Zhengzhou University (Engineering Science),2010,31(01):20.[doi:10.3969/j.issn.1671-6833.2010.03.006]
[6]李成,马志垒,王永涛..冲击荷载下防弹钢板三维损伤分析[J].郑州大学学报(工学版),2010,31(04):85.[doi:10.3969/j.issn.1671-6833.2010.04.021]
[7]王定标,雷风林,向飒,等.汽轮机末级变工况三维数值模拟与叶型改进设计[J].郑州大学学报(工学版),2010,31(05):1.[doi:10.3969/j.issn.1671-6833.2010.05.001]
[8]张兆宁,贺拴海,赵煜..基于应力控制箱梁截面设计数值模拟分析[J].郑州大学学报(工学版),2010,31(06):65.[doi:10.3969/j.issn.1671-6833.2010.06.016]
[9]汪磊,李涛..海底隧道穿越断层破碎带预注浆加固稳定性分析[J].郑州大学学报(工学版),2010,31(06):73.[doi:10.3969/j.issn.1671-6833.2010.06.018]
[10]魏新利,张富强,简士钊,等.以制冷剂R22为工质的地板辐射采暖模拟与优化[J].郑州大学学报(工学版),2011,32(02):6.[doi:10.3969/j.issn.1671-6833.2011.02.002]

更新日期/Last Update: 1900-01-01