[1]蒋建东,魏臻珠,冯涛..感应电机定子绕组故障仿真模型研究[J].郑州大学学报(工学版),2007,28(01):33-36.[doi:10.3969/j.issn.1671-6833.2007.01.009]
　JIANG Jiandong,Wei Zhenzhu,Feng Tao.Research on stator winding fault simulation model of induction motor[J].Journal of Zhengzhou University (Engineering Science),2007,28(01):33-36.[doi:10.3969/j.issn.1671-6833.2007.01.009]

点击复制

感应电机定子绕组故障仿真模型研究()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

28卷

期数:

2007年01期

页码:

33-36

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Research on stator winding fault simulation model of induction motor

作者:

蒋建东; 魏臻珠; 冯涛.

郑州大学,电气工程学院,河南,郑州,450001, 商丘供电公司,河南,商丘,476000

Author(s):

JIANG Jiandong; Wei Zhenzhu; Feng Tao

关键词:

感应电机;  定子绕组故障;  建模

Keywords:

induction motors;  stator winding failure;  Modeling

DOI:

10.3969/j.issn.1671-6833.2007.01.009

文献标志码:

A

摘要:

把感应电机定子侧绕组的每一个并联分支看成是一个支路,转子侧等效为d轴和q轴两个相互垂直的绕组,建立了基于绕组并联支路的感应电机磁链方程和电压方程.根据故障后支路的电压方程和磁链方程得出了各种绕组短路故障的等效模拟电路;对于绕组断线故障,可令该绕组的阻抗为一个相当大的数来模拟,最后用一个45 kW的电机参数进行仿真.

Abstract:

Each parallel branch of the stator side winding of the induction motor is regarded as a branch, and the rotor side is equivalent to two windings perpendicular to each other of the D axis and the Q axis, and the flux linkage equation and voltage equation of the induction motor based on the parallel branch of the winding are established. According to the voltage equation and flux equation of the branch after the fault, the equivalent analog circuit of various winding short-circuit faults is obtained. For a winding breakage fault, the impedance of the winding can be simulated as a considerable number, and finally a 45 kW motor parameter can be simulated.

常用功能