[1]王明东,苏文霞..并联型模糊PID复合控制器的Simulink建模与仿真[J].郑州大学学报(工学版),2006,27(01):79-81.[doi:10.3969/j.issn.1671-6833.2006.01.019]
　WANG Mingdong,Su Wenxia.Simulink modeling and simulation of parallel fuzzy PID composite controller[J].Journal of Zhengzhou University (Engineering Science),2006,27(01):79-81.[doi:10.3969/j.issn.1671-6833.2006.01.019]
点击复制

并联型模糊PID复合控制器的Simulink建模与仿真()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
27卷
期数:
2006年01期
页码:
79-81
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:

Simulink modeling and simulation of parallel fuzzy PID composite controller
作者:
王明东; 苏文霞.
郑州大学电气工程学院,河南,郑州,450002, 郑州大学信息工程学院,河南,郑州,450052
Author(s):
WANG Mingdong; Su Wenxia
关键词:
模糊控制;  PID控制;  Simulink;  S-函数
Keywords:
DOI:
10.3969/j.issn.1671-6833.2006.01.019
文献标志码:
A
摘要:
在并联型模糊PID复合控制器设计中,必须根据偏差大小及时地调整模糊控制部分和PID控制部分的比例,而这种较为复杂的控制策略利用普通的Simulink模块是很难实现的.采用S-函数来解决这个问题,首先基于MATLAB语言编写S-函数以实现模糊控制和PID控制比例的调整,然后在Simulink仿真环境下调用S-函数程序,从而建立起模糊PID复合控制系统的仿真模型.该方法仿真模型简单,编程容易,可以方便地实现并联结构中各部分所占比例随偏差大小的调整,从而能够取得更好的控制效果.
Abstract:
In the design of parallel fuzzy PID composite controller, the ratio of fuzzy control part and PID control part must be adjusted in time according to the deviation, and this more complex control strategy is difficult to achieve by using ordinary Simulink module. The S-function is used to solve this problem, and the S-function is first written based on the MATLAB language to realize the adjustment of fuzzy control and PID control ratio, and then the S-function program is called in the Simulink simulation environment to establish the simulation model of fuzzy PID composite control system. The simulation model of this method is simple and easy to program, and it is convenient to adjust the proportion of each part in the parallel structure with the size of the deviation, so as to achieve better control effect.

相似文献/References:

[1]冯冬青,孔祥伟,许仿..城市恒压变频供水系统的一种智能优化控制策略[J].郑州大学学报(工学版),2011,32(01):85.[doi:10.3969/j.issn.1671-6833.2011.01.021]
[2]赵国生,董艳艳..变电站电压无功模糊控制器的设计[J].郑州大学学报(工学版),2013,34(04):55.[doi:10.3969/j.issn.1671-6833.2013.04.013]
[3]闫水保,郑立军,张营帅,等.电站锅炉主汽温自适应PID控制[J].郑州大学学报(工学版),2008,29(01):18.
　Yan Shuibao,ZHENG Lijun,Zhang Yingshuai,et al.Adaptive PID control of main steam temperature of power station boiler[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):18.
[4]刘宪林,杨建,王明东..励磁控制系统灰色预测PID控制仿真研究[J].郑州大学学报(工学版),2006,27(02):70.[doi:10.3969/j.issn.1671-6833.2006.02.017]
　LIU Xianlin,Yang Jian,Wang Mingdong.Simulation study of grey prediction PID control of excitation control system[J].Journal of Zhengzhou University (Engineering Science),2006,27(01):70.[doi:10.3969/j.issn.1671-6833.2006.02.017]
[5]朱晓东,范秉琪,杨祖轩,等.基于ITAE标准函数的纯滞后系统控制[J].郑州大学学报(工学版),2006,27(02):73.[doi:10.3969/j.issn.1671-6833.2006.02.018]
　ZHU Xiaodong,FAN Bingqi,Yang Zuxuan,et al.Pure hysteresis system control based on ITAE standard functions[J].Journal of Zhengzhou University (Engineering Science),2006,27(01):73.[doi:10.3969/j.issn.1671-6833.2006.02.018]
[6]冯冬青,张希平..基于神经网络的自学习模糊控制[J].郑州大学学报(工学版),2003,24(04):6.[doi:10.3969/j.issn.1671-6833.2003.04.002]
　Feng Dongqing,Zhang Xiping.Self-learning fuzzy control based on neural network[J].Journal of Zhengzhou University (Engineering Science),2003,24(01):6.[doi:10.3969/j.issn.1671-6833.2003.04.002]
[7]刘红霞,杨开明,黄明生.机器人握力模糊控制系统[J].郑州大学学报(工学版),1996,17(04):115.
　Liu Hongxia,Yang Kaiming,Huang Mingsheng.Robot grip fuzzy control system[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):115.
[8]闫家杰.关于模糊控制的数学模型[J].郑州大学学报(工学版),1996,17(03):78.
　Yan Jiajie.About fuzzy control mathematical model[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):78.

更新日期/Last Update: 1900-01-01