[1]慕慧,杨少伟..山区公路分离式断面最大坡长限制分析[J].郑州大学学报(工学版),2005,26(04):72-76.[doi:10.3969/j.issn.1671-6833.2005.04.018]
 Mu Hui,Yang Shaowei.Analysis of maximum slope length limit of separated section of mountain road[J].Journal of Zhengzhou University (Engineering Science),2005,26(04):72-76.[doi:10.3969/j.issn.1671-6833.2005.04.018]
点击复制

山区公路分离式断面最大坡长限制分析()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
26卷
期数:
2005年04期
页码:
72-76
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Analysis of maximum slope length limit of separated section of mountain road
作者:
慕慧杨少伟.
长安大学特殊地区公路工程教育部重点实验室,陕西,西安,710064, 长安大学特殊地区公路工程教育部重点实验室,陕西,西安,710064
Author(s):
Mu Hui; Yang Shaowei
关键词:
公路 分离式断面 坡长限制 汽车动力性 运行速度 纵断面设计
Keywords:
DOI:
10.3969/j.issn.1671-6833.2005.04.018
文献标志码:
A
摘要:
从汽车行驶理论入手,以解放CA141载重车为标准车型,对汽车的动力性及车辆在道路上的受力情况、运动方程进行分析,并充分考虑汽车在上下坡所受到的诸如空气阻力、海拔高度及车辆载荷等各种影响因素,探讨了山区公路最大坡长限制的确定方法.以分析结果为基础,提出我国<公路工程技术标准>应适当放宽最大坡长限制的建议,同时给出了山区公路最大坡长限制的修改建议值(并通过试验验证了分析的正确性),以供设计人员在设计过程中参考.
Abstract:
Starting from the automobile driving theory, taking the Jiefang CA141 truck as the standard model, the dynamic nature of the car, the force and motion equation of the vehicle on the road are analyzed, and the various influencing factors such as air resistance, altitude and vehicle load are fully considered when the car is exposed to the uphill and downhill, and the method of determining the maximum slope length limit of mountain roads is discussed. Based on the analysis results, the suggestions that the maximum slope length limit should be appropriately relaxed > the technical standards of China’s < highway engineering are put forward, and the recommended value for modifying the maximum slope length limit of mountain roads is given (and the correctness of the analysis is verified by experiments) for designers to refer to in the design process.

相似文献/References:

[1]周明智,周振红..利用ArcGIS进行公路路线的三维建模[J].郑州大学学报(工学版),2008,29(02):77.[doi:10.3969/j.issn.1671-6833.2008.02.019]
 Zhou Wise,Zhou Zhenhong.Use ArcGIS for 3D modeling of highway routes[J].Journal of Zhengzhou University (Engineering Science),2008,29(04):77.[doi:10.3969/j.issn.1671-6833.2008.02.019]

更新日期/Last Update: 1900-01-01