[1]陈静波,张世勋,何领好,等.注射模三维温度场的数值分析[J].郑州大学学报(工学版),2003,24(02):9-14.[doi:10.3969/j.issn.1671-6833.2003.02.003]
　CHEN Jingbo,ZHANG Shixun,He Linghao,et al.Numerical analysis of the three-dimensional temperature field of the injection mold[J].Journal of Zhengzhou University (Engineering Science),2003,24(02):9-14.[doi:10.3969/j.issn.1671-6833.2003.02.003]
点击复制

注射模三维温度场的数值分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
24卷
期数:
2003年02期
页码:
9-14
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Numerical analysis of the three-dimensional temperature field of the injection mold
作者:
陈静波; 张世勋; 何领好; 等.
郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002
Author(s):
CHEN Jingbo; ZHANG Shixun; He Linghao; etc
关键词:
注射模;  温度场;  数值分析;  边界积分;  边界元
Keywords:
DOI:
10.3969/j.issn.1671-6833.2003.02.003
文献标志码:
A
摘要:
考虑到注射模的结构特点(型腔为狭缝面,冷却孔细长),通过边界方程及边界梯度方程的耦合,推导出求解注射模三维温度场的边界积分方程,并给出了计算基本解积分的数值方法及高阶奇异积分的解析方法;最后通过实例说明了数值分析在冷却系统设计中的应用.
Abstract:
Considering the structural characteristics of the injection mold (the cavity is a slit surface and the cooling hole is elongated), the boundary integral equation for solving the three-dimensional temperature field of the injection mold is derived through the coupling of boundary equation and boundary gradient equation, and the numerical method for calculating the basic solution integral and the analytical method of high-order singular integral are given. Finally, the application of numerical analysis in cooling system design is illustrated by example.

相似文献/References:

[1]戴逸飞,杨 平,王 宁,等.交叠车站下穿段MJS加固温度场变化规律研究[J].郑州大学学报(工学版),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
　DAI Yifei,YANG Ping,WANG Ning,et al.Study on Temperature Field Variation Law of MJS Reinforcement for Underpass Section of Overlapping Station[J].Journal of Zhengzhou University (Engineering Science),2023,44(02):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
[2]夏江涛,杨平..盾构出洞水平冻结加固杯形冻土壁温度场监测分析[J].郑州大学学报(工学版),2010,31(02):30.[doi:10.3969/j.issn.1671-6833.2010.02.007]
　Xia Jiangtao,Yang Ping.Temperature field monitoring and analysis of shield hole horizontal freezing reinforcement cup-shaped frozen soil wall[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):30.[doi:10.3969/j.issn.1671-6833.2010.02.007]
[3]张岗,贺拴海..非稳对流模式下混凝土箱梁内生热场与计算方法[J].郑州大学学报(工学版),2010,31(04):11.[doi:10.3969/j.issn.1671-6833.2010.04.003]
[4]任翔,何青,佟阳,等.混凝土桥塔温度场和空间应力场分析[J].郑州大学学报(工学版),2011,32(02):62.[doi:10.3969/j.issn.1671-6833.2011.02.016]
[5]陈成,杨平,张婷..高承压富含水层人工强制解冻温度场数值分析[J].郑州大学学报(工学版),2012,33(02):81.[doi:10.3969/j.issn.1671-6833.2012.02.020]
[6]张银霞,乔向南,王栋,等.CO2气体保护焊温度场的三维数值模拟与分析[J].郑州大学学报(工学版),2012,33(04):41.[doi:10.3969/j.issn.1671-6833.2012.04.010]
[7]夏茂辉,赵玉凤,吕鹏,等.改进型无网格迦辽金法在稳定热传导中的应用[J].郑州大学学报(工学版),2012,33(06):71.[doi:10.3969/j.issn.1671-6833.2012.06.017]
[8]王为术,李帅帅,周俊杰,等.350MW超临界锅炉螺旋水冷壁壁温特性研究[J].郑州大学学报(工学版),2013,34(03):50.[doi:10.3969/j.issn.1671-6833.2013.03.013]
　WANG Wei-shu,LI Shuai-shuai,ZHOU Jun-jie,et al.The Temperature Characteristics Study of Spiral Water-wallin 350 Mw Supercritical Pressure Boilers[J].Journal of Zhengzhou University (Engineering Science),2013,34(02):50.[doi:10.3969/j.issn.1671-6833.2013.03.013]
[9]李金海,熊滨生..微水节能热风阀阀板的模拟分析[J].郑州大学学报(工学版),2008,29(03):66.[doi:10.3969/j.issn.1671-6833.2008.03.017]
　Li Jinhai,Xiong Binsheng.Simulation analysis of micro-water energy-saving hot air valve valve plate[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):66.[doi:10.3969/j.issn.1671-6833.2008.03.017]
[10]夏毅敏,暨智勇,姚萍屏..高速动车组制动盘瞬态温度场及热应力场分析[J].郑州大学学报(工学版),2009,30(03):75.[doi:10.3969/j.issn.1671-6833.2009.03.019]
　XIA Yimin,Ji Zhiyong,Yao Pingping.Analysis of transient temperature field and thermal stress field of brake disc of high-speed EMU[J].Journal of Zhengzhou University (Engineering Science),2009,30(02):75.[doi:10.3969/j.issn.1671-6833.2009.03.019]

更新日期/Last Update: 1900-01-01