[1]侯俊英,田丰,赵程..Setllite Ni60等离子弧熔覆层的磨损机理研究[J].郑州大学学报(工学版),2003,24(01):82-84.[doi:10.3969/j.issn.1671-6833.2003.01.020]
　HOU Junying,TIAN Feng,Zhao Cheng.Study on the wear mechanism of Setllite Ni60 plasma arc cladding layer[J].Journal of Zhengzhou University (Engineering Science),2003,24(01):82-84.[doi:10.3969/j.issn.1671-6833.2003.01.020]
点击复制

Setllite Ni60等离子弧熔覆层的磨损机理研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
24卷
期数:
2003年01期
页码:
82-84
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Study on the wear mechanism of Setllite Ni60 plasma arc cladding layer
作者:
侯俊英; 田丰; 赵程.
青岛科技大学机械与电子工程学院,山东,青岛,266042, 青岛科技大学机械与电子工程学院,山东,青岛,266042, 青岛科技大学机械与电子工程学院,山东,青岛,266042
Author(s):
HOU Junying; TIAN Feng; Zhao Cheng
关键词:
熔覆;  耐磨性;  热等离子弧
Keywords:
DOI:
10.3969/j.issn.1671-6833.2003.01.020
文献标志码:
A
摘要:
运用热等离子弧熔覆法,在Q235基体表面熔覆了镍基合金,对合金的组织及形成原因进行了分析,同时研究了熔覆层和基体的界面.试验表明,熔覆层有较好的耐磨性.指出其原因主要是因为形成大量的高强韧镍基固溶体和耐磨的硬质相及表面形成的细小组织对耐磨性的贡献,并从多方面分析了耐磨机理.
Abstract:
The nickel-based alloy was clad on the surface of the Q235 matrix by hot plasma arc cladding method, and the structure and formation reasons of the alloy were analyzed, and the interface between the cladding layer and the matrix was studied. The test shows that the cladding layer has good wear resistance. It is pointed out that the main reason is the formation of a large number of high-strength and tough nickel-based solid solutions and wear-resistant hard phases and the contribution of fine tissues formed on the surface to the wear resistance, and the wear resistance mechanism is analyzed from many aspects.

相似文献/References:

[1]孙玉福,刘金庆,王璐,等.B对ZG40MnCr组织和性能的影响[J].郑州大学学报(工学版),2011,32(01):59.[doi:10.3969/j.issn.1671-6833.2011.01.015]
[2]张鸣功,朱洪洲,徐松,等.基于灰熵法的粉煤灰砼耐磨性影响因素分析[J].郑州大学学报(工学版),2008,29(02):141.[doi:10.3969/j.issn.1671-6833.2008.02.036]
　ZHANG Minggong,ZHU Hongzhou,XU Song,et al.Analysis of influencing factors of wear resistance of fly ash concrete based on ash entropy method[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):141.[doi:10.3969/j.issn.1671-6833.2008.02.036]
[3]李福山,黄凤勇,袁静慧,等.(MgCuGd)100-xTix块状金属玻璃复合材料耐磨性能研究[J].郑州大学学报(工学版),2008,29(03):15.[doi:10.3969/j.issn.1671-6833.2008.03.004]
　LI Fushan,HUANG Fengyong,Yuan Jinghui,et al.(MgCuGd) 100-xTix bulk metal glass composite wear resistance study[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):15.[doi:10.3969/j.issn.1671-6833.2008.03.004]
[4]王红星,林萍华,储成林,等.铜基镀镍料浆包渗铬层组织和性能研究[J].郑州大学学报(工学版),2008,29(04):38.[doi:10.3969/j.issn.1671-6833.2008.04.009]
　Wang Hongxing,LIN Pinghua,Reserve Forest,et al.Microstructure and properties of chromium-infiltrated layer covered with copper-based nickel-plated slurry[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):38.[doi:10.3969/j.issn.1671-6833.2008.04.009]
[5]汤文博,李永刚,徐继达..冲蚀条件下等离子喷涂Al2O3陶瓷涂层的磨损特性[J].郑州大学学报(工学版),2002,23(01):39.[doi:10.3969/j.issn.1671-6833.2002.01.011]
　Tang Wenbo,LI Yonggang,Xu Jida.Wear characteristics of plasma sprayed Al2O3 ceramic coating under erosion conditions[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):39.[doi:10.3969/j.issn.1671-6833.2002.01.011]

更新日期/Last Update: 1900-01-01