[1]郭馨艳,曾桂香,王伟,等.大型储罐结构的动力性能分析[J].郑州大学学报(工学版),1999,20(02):80-82.[doi:10.3969/j.issn.1671-6833.1999.02.026]
　GUO Xinyan,Zeng Guixiang,WANG Wei,et al.Dynamic performance analysis of large tank structure[J].Journal of Zhengzhou University (Engineering Science),1999,20(02):80-82.[doi:10.3969/j.issn.1671-6833.1999.02.026]
点击复制

大型储罐结构的动力性能分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20卷
期数:
1999年02期
页码:
80-82
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Dynamic performance analysis of large tank structure
作者:
郭馨艳; 曾桂香; 王伟; 等.
郑州工业大学数理力学系,河南郑州,450002, 濮阳工业学校,河南濮阳,457000
Author(s):
GUO Xinyan; Zeng Guixiang; WANG Wei; etc
关键词:
储罐;  有限元;  自振特性;  地震响应
Keywords:
DOI:
10.3969/j.issn.1671-6833.1999.02.026
文献标志码:
A
摘要:
对10万m3大型储罐进行模型简化,用有限元法对储罐进行自振特性分析,研究了气体容量对储罐自振特性的影响.计算了储罐在x方向输入EL-Centro地震波作用下的时程响应,观察不同高度处的位移及应力分布情况,所得结果可为储罐的地震破坏提供理论上的依据.
Abstract:
The model of the 10,3 m<> large storage tank was simplified, and the self-vibration characteristics of the storage tank were analyzed by the finite element method, and the influence of gas capacity on the self-vibration characteristics of the storage tank was studied. The time history response of the tank under the input EL-Centro seismic wave in the x direction is calculated, and the displacement and stress distribution at different heights are observed, and the results can provide a theoretical basis for the seismic damage of the tank.

相似文献/References:

[1]莫石秀,郭月芹..隔热板埋深对冻土路基温度场的影响分析[J].郑州大学学报(工学版),2010,31(03):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
　Mo Shixiu,Guo Yueqin.Analysis of the influence of buried depth of heat insulation board on the temperature field of frozen soil subgrade[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
[2]张军,张恒,张洛明,等.基于接触的销钉孔塑性变形分析[J].郑州大学学报(工学版),2010,31(04):81.[doi:10.3969/j.issn.1671-6833.2010.04.020]
[3]张俊光,刘永健,姚晓荣,等.刚性悬索加劲钢桁梁桥结构参数敏感性分析[J].郑州大学学报(工学版),2010,31(05):55.[doi:10.3969/j.issn.1671-6833.2010.05.014]
[4]李清富,辛保兵,李科..基于SVM的预应力混凝土梁有效预应力识别[J].郑州大学学报(工学版),2011,32(01):18.[doi:10.3969/j.issn.1671-6833.2011.01.005]
[5]雷少敏,唐华平,朱维南..3ZX平面铣床横梁有限元分析及优化研究[J].郑州大学学报(工学版),2011,32(03):60.[doi:10.3969/j.issn.1671-6833.2011.03.015]
[6]周灿,王建军,邓圭玲..高速机床恒定循环水温暖机的仿真与实验研究[J].郑州大学学报(工学版),2011,32(05):121.[doi:10.3969/j.issn.1671-6833.2011.05.030]
[7]李成,朱红红,铁瑛,等.销钉连接接触面的应力有限元计算与分析[J].郑州大学学报(工学版),2012,33(01):84.[doi:10.3969/j.issn.1671-6833.2012.01.021]
[8]吴梦喜,邓琴芳,黄艳北..堤基管涌动态发展的数值模拟[J].郑州大学学报(工学版),2012,33(05):66.[doi:10.3969/j.issn.1671-6833.2012.05.015]
[9]韩增盛,马松花..地铁车辆吸能装置耐碰撞性分析[J].郑州大学学报(工学版),2012,33(06):41.[doi:10.3969/j.issn.1671-6833.2012.06.010]
[10]周淑芬,郝宪武,李子青,等.钢管混凝土桥墩在长联低墩连续刚构桥中的应用研究[J].郑州大学学报(工学版),2013,34(01):27.[doi:10.3969/j.issn.1671-6833.2013.01.007]

更新日期/Last Update: 1900-01-01