[1]李世祥,孙玉福,李亚涛,等.耐火砖成形模具材质探讨和初步研制[J].郑州大学学报(工学版),1993,14(02):55-62.
　Li Shixiang,Sun Yufu,Li Yatao,et al.Fire resistant brick forming mold material discussion and preliminary development[J].Journal of Zhengzhou University (Engineering Science),1993,14(02):55-62.
点击复制

耐火砖成形模具材质探讨和初步研制()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
14卷
期数:
1993年02期
页码:
55-62
栏目:
出版日期:
1993-06-28

文章信息/Info

Title:
Fire resistant brick forming mold material discussion and preliminary development
作者:
李世祥;孙玉福;李亚涛;周济时;
郑州工学院,郑州工学院,郑州工学院,河南省科委干部管理学校,
Author(s):
Li Shixiang; Sun Yufu; Li Yatao; Zhou Jishi;
Zhengzhou Institute of Technology, Zhengzhou Institute of Technology, Zhengzhou Institute of Technology, Henan Provincial Science and Technology Commission Cadres Management School,
关键词:
本文通过对耐火砖成形模具磨损机理和对现有耐火砖成形模具用材质的分析与比较; 从“综合效益”原则出发; 试制了一种适合于一般耐火材料厂实用的模具钢——空淬微变形低合金耐磨铸钢。该材质材料来源充足; 成本低; 耐磨性较好; 与低碳铜渗碳模具相比; 平均寿命可提高2倍以上; 同时; 返修工艺简单。
Keywords:
Wear -resistant cast steel;  empty quenching
文献标志码:
A
摘要:
耐磨铸钢;;空淬
Abstract:
Based on the analysis and comparison of the material for the wear of refractory bricks and the analysis and comparison of the existing refractory brick forming mold, from the principle of "comprehensive benefits", it tried to make a model steel suitable for general refractory material factories -air quenching micro -deformation low alloy wear -resistant cast steel. The material of this material is sufficient, low cost, and good abrasion resistance. Compared with low -carbon copper carburizing molds, the average life span can be increased by more than 2 times. At the same time, the repairs process is simple.
更新日期/Last Update: 1900-01-01