[1]张琳娜,沈沛如.描述车削颤振过程的数学模型[J].郑州大学学报(工学版),1990,11(04):74-78.
　Zhang Linna,Shen Peiru,Describe the mathematical model of the tremor tremor process[J].Journal of Zhengzhou University (Engineering Science),1990,11(04):74-78.
点击复制

描述车削颤振过程的数学模型()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
11卷
期数:
1990年04期
页码:
74-78
栏目:
出版日期:
1990-12-28

文章信息/Info

Title:
Describe the mathematical model of the tremor tremor process
作者:
张琳娜;沈沛如;
郑州工学院机械系,郑州工学院机械系,
Author(s):
Zhang Linna; Shen Peiru;
Department of Machinery, Zhengzhou Institute of Technology, Department of Machinery, Zhengzhou Institute of Technology,
关键词:
车削颇振; 数学模型
Keywords:
The turning is quite vibrating
文献标志码:
A
摘要:
本文从车削的特点出发。根据颤振理论,分析了三维动态车削中影响颤振的主要因素,提出了描述车削颤振的适应性建模方向并建立了动态车削过程的非线性数学模型。本文所建模型反映出的有关车削颇振的规律性与车削颤振实验结果取得了良好的一致性,为阐明车削颤振机理及其在线监控提供了理论依据。
Abstract:
This article starts from the characteristics of turning. Based on the theory of tremor, the main factors of influencing tremor in the three -dimensional dynamic driving were analyzed, and the non -linear mathematical model describing the direction of adaptive modeling describing the tremor vibration and establishing a dynamic driving process was proposed. The regularity of the models and vibrations of driving and ribbon trembling by the models built in this article have achieved good consistency, which provides a theoretical basis for clarifying the engine tremor mechanism and its online surveillance.

相似文献/References:

[1]毕苏萍,张军,周振红..CVF对创建Fortran COM组件的支持[J].郑州大学学报(工学版),2009,30(02):88.[doi:10.3969/j.issn.1671-6833.2009.02.021]
　Pi Suping,ZHANG Jun,Zhou Zhenhong.CVF support for creating Fortran COM components[J].Journal of Zhengzhou University (Engineering Science),2009,30(04):88.[doi:10.3969/j.issn.1671-6833.2009.02.021]
[2]李宗坤,郑晶星,王伟..基于双曲线回归三参模型的分析方法研究[J].郑州大学学报(工学版),2002,23(01):14.[doi:10.3969/j.issn.1671-6833.2002.01.004]
　Li Zongkun,Zheng Jingxing,Wang Wei.Research on analysis method based on hyperbolic regression three-parameter model[J].Journal of Zhengzhou University (Engineering Science),2002,23(04):14.[doi:10.3969/j.issn.1671-6833.2002.01.004]
[3]陈建梅..线性回归模型在企业经济活动分析中的应用[J].郑州大学学报(工学版),2001,22(03):111.[doi:10.3969/j.issn.1671-6833.2001.03.034]
　CHEN Jianmei..Application of linear regression model in the analysis of firm economic activities[J].Journal of Zhengzhou University (Engineering Science),2001,22(04):111.[doi:10.3969/j.issn.1671-6833.2001.03.034]
[4]贾军国,王书彬,钟燕辉,等.节水型洗衣机设计的数学模型[J].郑州大学学报(工学版),1998,19(01):103.
　[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):103.
[5]任万强,胡启宙,王合桢.电力有源滤波器控制器的研究与仿真分析[J].郑州大学学报(工学版),1998,19(04):76.
　Ren Wanqiang,Hu Qiu,Wang Hezheng.Research and simulation analysis of the power of the power controller controller[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):76.
[6]夏伯乾,虞烈,谢友柏.齿轮—转子—轴承系统弯扭耦合振动的新模型[J].郑州大学学报(工学版),1997,18(01):2.
　Xia Boqian,Yu Lie,Xie Youbai.New model of gear -rotor -bearing system bending coupling vibration[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):2.
[7]闫家杰.关于模糊控制的数学模型[J].郑州大学学报(工学版),1996,17(03):78.
　Yan Jiajie.About fuzzy control mathematical model[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):78.
[8]沈宪章,沈海华.母函数及其在离散控制系统中的应用[J].郑州大学学报(工学版),1996,17(01):99.
　Shen Haihua,Shen Haihua.The application of the mother function and it in the discrete control system[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):99.
[9]马细霞,贺北方,马竹青,等.综合利用水库最优调度函数研究[J].郑州大学学报(工学版),1995,16(03):17.
　Buy Wenning,Gu Xiasheng,The quantitative relationship between the biodegradation between the single ring aromatics and the chemical structure[J].Journal of Zhengzhou University (Engineering Science),1995,16(04):17.
[10]范立明,许秀成.具有曲线形隔板的双区反应器的开发研究[J].郑州大学学报(工学版),1992,13(01):47.
　Fan Liming,Xu Xiucheng,Development and research with dual -zone reactor with curve partitions[J].Journal of Zhengzhou University (Engineering Science),1992,13(04):47.

更新日期/Last Update: 1900-01-01