[1]陈根永,高翔宇,谭 超,等.集中式馈线自动化配电网供电可靠性评估[J].郑州大学学报(工学版),2024,45(01):114-121.[doi:10.13705/j.issn.1671-6833.2023.04.006]
　CHEN Genyong,GAO Xiangyu,TAN Chao,et al.Evaluation of Power Supply Reliability of Centralized Feeder Automation Distribution Network[J].Journal of Zhengzhou University (Engineering Science),2024,45(01):114-121.[doi:10.13705/j.issn.1671-6833.2023.04.006]
点击复制

集中式馈线自动化配电网供电可靠性评估()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
45
期数:
2024年01期
页码:
114-121
栏目:
出版日期:
2024-01-19

文章信息/Info

Title:
Evaluation of Power Supply Reliability of Centralized Feeder Automation Distribution Network
作者:
陈根永;  高翔宇;  谭 超;  范旭光
1. 郑州大学 电气与信息工程学院,河南 郑州 450001; 2. 国网河南省电力公司新乡供电公司,河南 新乡 453000; 3. 国网河南省电力公司宝丰县供电公司,河南 平顶山 467400
Author(s):
CHEN Genyong 1 ;  GAO Xiangyu 1 ;  TAN Chao 2 ;  FAN Xuguang
1. School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China; 
2. Xinxiang Power Supply Company of State Grid Henan Electric Power Company, Xinxiang 453000, China;
3. Baofeng Power Supply Company of State Grid Henan Electric Power Company, Pingdingshan 467400, China
关键词:
集中式馈线自动化;  配电网;  供电可靠性;  预安排检修;  负荷转供
Keywords:
centralized feeder automation;  distribution network;  power supply reliability;  pre-arranged maintenance;  load transfer
DOI:
10.13705/j.issn.1671-6833.2023.04.006
文献标志码:
A
摘要:
计及集中式馈线自动化的配电网可靠性评估尚存在较多研究空白,且多数研究仅计及故障停电的影响, 在考虑预安排检修容量约束的情况下,计及负荷转供影响,结合馈线自动化的类型及运行逻辑,依据馈线自动化相 关技术指标,对恢复供电过程中出现的负荷点进行详细分类,推导出不同类型负荷期望恢复供电时间和配电网供 电可靠性指标计算公式。 结合算例进行分析可知,不同终端配置 下 馈 线 系 统 平 均 停 电 持 续 时 间 SAIDI 可 减 少 0. 95 ~ 1. 08 h / (用户·a) ,说明了优化终端配置可有效提高配电网供电可靠性,证明了所提评估方法的准确性和实 用性,并比较了不同终端配置对可靠性的影响。
Abstract:
There were still some research gaps in reliability evaluation of distribution network considering centralized feeder automation, and most studies only focused on the impact of power failure. Considering the pre-arranged maintenance and capacity constraints, the influence of load transfer, and combined with the type and operation logic of feeder automation, according to the related technical indexes of feeder automation, the load nodes appearing in the process of power restoration were classified in detail. And the calculation formulas of expected power restoration time and power supply reliability indexes of different types of loads were derived. Combined with an example, the average outage duration SAIDI of feeder system was reduced by 0. 95-1. 08 h / ( user·a) with different terminal configurations in the example, which showed that optimized the terminal configuration could effectively improve the power supply reliability of distribution network, which proved the accuracy and practicability of the evaluation method in this study. The influences of different terminal configurations on reliability were compared.

参考文献/References:

[1] MENG Q H, WANG T Z. Effects of distribution automation on distribution system reliability[C]∥2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific. Piscataway： IEEE, 2014： 1-4.

[2] 商海涛, 吴林, 赵渊, 等. 计及集中式馈线自动化的配电网可靠性评估模型[J]. 电力自动化设备, 2017, 37(5)： 129-135, 141.SHANG H T, WU L, ZHAO Y, et al. Reliability evaluation model of distribution network incorporating centra-lized feeder automation[J]. Electric Power Automation Equipment, 2017, 37(5)： 129-135, 141.
[3] 赵渊, 吴林, 刘庆尧, 等. 含重合器式馈线自动化的配电网可靠性评估[J]. 重庆大学学报, 2018, 41(5)： 1-14.ZHAO Y, WU L, LIU Q Y, et al. Reliability evaluation of distribution system with recloser feeder automation[J]. Journal of Chongqing University, 2018, 41(5)： 1-14.
[4] 向真, 杜亚松, 邢恩靖, 等. 配网自动化建设对供电可靠性影响[J]. 电网与清洁能源, 2012, 28(10)： 20-24.XIANG Z, DU Y S, XING E J, et al. Influence of distribution automation construction on the power supply reliability[J]. Power System and Clean Energy, 2012, 28(10)：20-24.
[5] 陈彬, 张功林, 黄建业. 配电自动化系统实用技术[M]. 北京： 机械工业出版社, 2015.CHEN B, ZHANG G L, HUANG J Y. Practical techno-logy of distribution automation system [M]. Beijing： China Machine Press, 2015.
[6] 李闫远, 刘会家, 肖隆恩, 等. 基于自动区域故障模式与后果分析法的配电网可靠性评估[J]. 三峡大学学报(自然科学版), 2015, 37(2)： 55-58.LI Y Y, LIU H J, XIAO L E, et al. Reliability evaluation of distribution system based on automatic area failure mode and effects analysis method[J]. Journal of China Three Gorges University (Natural Sciences), 2015, 37(2)： 55-58.
[7] 王主丁, 韦婷婷, 万凌云, 等. 计及多类开关和容量约束的中压配电网可靠性估算解析模型[J]. 电力系统自动化, 2016, 40(17)： 146-155.WANG Z D, WEI T T, WAN L Y, et al. Analytical reliability estimation model of medium voltage distribution networks considering different types of switches and capacity constraints[J]. Automation of Electric Power Systems, 2016, 40(17)： 146-155.
[8] 杨建林, 陈龙, 郭明星, 等. 考虑预安排停电的配电网可靠性评估方法[J]. 高电压技术, 2017, 43(4)： 1248-1255.YANG J L, CHEN L, GUO M X, et al. Reliability eva-luation method of distribution network in consideration of prearranged power cut[J]. High Voltage Engineering, 2017, 43(4)： 1248-1255.
[9] 王浩浩, 管霖, 吴熳红. 配电网可靠性评估中预安排停电的实用数学模型[J]. 电力系统自动化, 2011, 35(23)： 59-63, 81.WANG H H, GUAN L, WU M H. Mathematical model of scheduled outage in reliability assessment of distribution network[J]. Automation of Electric Power Systems, 2011, 35(23)： 59-63, 81.
[10] 邱生敏, 王浩浩, 管霖. 考虑复杂转供和预安排停电的配电网可靠性评估[J]. 电网技术, 2011, 35(5)： 121-126.QIU S M, WANG H H, GUAN L. An improved algorithm for reliability assessment of distribution network conside-ring complex load transfer and scheduled outage[J]. Power System Technology, 2011, 35(5)： 121-126.
[11] 郝玉东, 包宇喆, 杨淑霞, 等. 配电网故障快速定位及图形显示软件系统的设计[J]. 郑州大学学报(工学版), 2012, 33(3)： 52-55.HAO Y D, BAO Y Z, YANG S X, et al. Design of rapid automatic fault location and graphics display software system of lines in distribution network[J]. Journal of Zhengzhou University (Engineering Science), 2012, 33(3)： 52-55.[12] BAXEVANOS I S, LABRIDIS D P. Implementing multiagent systems technology for power distribution network control and protection management[J]. IEEE Transactions on Power Delivery, 2007, 22(1)： 433-443.
[13] 李冠斌. 基于馈线自动化信息的配电网故障区段定位方法研究[D]. 济南： 山东大学, 2021.LI G B. Research on faulted section location method for distribution network based on feeder automation information[D]. Jinan： Shandong University, 2021.
[14] 王主丁. 高中压配电网规划： 实用模型、方法、软件和应用(下册)[M]. 北京： 科学出版社, 2020.WANG Z D. High and medium voltage distribution network planning： practical models, methods, software and applications (volume Ⅱ)[M]. Beijing： Science Press, 2020.

相似文献/References:

[1]陈根永,侯永将,杨凤民,等.20kV配电电压等级的接地方式研究[J].郑州大学学报(工学版),2010,31(03):33.
　CHEN Genyong,HOU Yongjiang,YANG Fengmin,et al.Research of Neutral Grounding Modes in 20 kV Distribution Network[J].Journal of Zhengzhou University (Engineering Science),2010,31(01):33.
[2]陈根永,孙栗,彭勇,等.基于层次分析法的郑州新区电压等级序列优化研究[J].郑州大学学报(工学版),2011,32(06):121.[doi:10.3969/j.issn.1671-6833.2011.06.029]
[3]王金凤,包毅,程跃森,等.城市配电网电容电流补偿研究[J].郑州大学学报(工学版),2012,33(04):69.[doi:10.3969/j.issn.1671-6833.2012.04.016]
　WANG Jin-feng,BAO Yi,CHENG Yaosen,et al.Compensation for Capacitive Current in Urban Distribution Network[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):69.[doi:10.3969/j.issn.1671-6833.2012.04.016]
[4]章健,王君亮,袁义江..基于GSM的配变电量自动采集系统的设计与实现[J].郑州大学学报(工学版),2004,25(02):63.[doi:10.3969/j.issn.1671-6833.2004.02.015]
　ZHANG Jian,Wang Junliang,Yuan Yijiang.Design and implementation of automatic power distribution and substation collection system based on GSM[J].Journal of Zhengzhou University (Engineering Science),2004,25(01):63.[doi:10.3969/j.issn.1671-6833.2004.02.015]

更新日期/Last Update: 2024-01-25