[1]叶元烈,张明成.活塞裙部等曲面和变曲面成型机构的研究[J].郑州大学学报(工学版),1995,16(02):23-29.
　Ye Yuanlie,Zhang Mingcheng.Research on the surface of the piston skirt and other curved surfaces and curved surface forming institutions[J].Journal of Zhengzhou University (Engineering Science),1995,16(02):23-29.
点击复制

活塞裙部等曲面和变曲面成型机构的研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
16
期数:
1995年02期
页码:
23-29
栏目:
出版日期:
1995-02-28

文章信息/Info

Title:
Research on the surface of the piston skirt and other curved surfaces and curved surface forming institutions
作者:
叶元烈; 张明成
郑州工学院
Author(s):
Ye Yuanlie;  Zhang Mingcheng
Zhengzhou Institute of Technology
关键词:
活寒; 曲线; 九杆机构; 误差
Keywords:
Cold;  curve;  nine shot institutions;  errors
文献标志码:
A
摘要:
本文提出了，用对心曲柄滑块机构和其它机构串联组成八杆机构，该机构能成型活塞裙部等截面曲线。当把该八杆机构变成九杆机构时，该九杆机构可以成型活塞变截面曲线。本文还分析了机构切削工件误差。
Abstract:
This article is proposed that the eight -shot mechanism is connected in series with the psychic crack slider mechanism and other agencies. When the eight -shot mechanism is turned into a nine -shot mechanism, the nine -shot mechanism can form a piston -to -section curve. This article also analyzes the error of institutional cutting workpieces.

相似文献/References:

[1]郭同德,杜云海,卢艳..GIS中道路曲线的整体误差模型与试验研究[J].郑州大学学报(工学版),2004,25(02):94.[doi:10.3969/j.issn.1671-6833.2004.02.023]
　GUO Tongde,Du Yunhai,Lu Yan.Overall error model and experimental study of road curve in GIS[J].Journal of Zhengzhou University (Engineering Science),2004,25(02):94.[doi:10.3969/j.issn.1671-6833.2004.02.023]
[2]叶元烈,张明成,李春英,等.活塞裙部曲面成型机构的研究[J].郑州大学学报(工学版),1994,15(01):45.
　Ye Yuanlie,Zhang Mingcheng,Li Chunying,et al.Research on Pistons skirt surface molding agency[J].Journal of Zhengzhou University (Engineering Science),1994,15(02):45.
[3]张明成,金国光.行星锥式无级变速器干涉问题探讨[J].郑州大学学报(工学版),1992,13(01):69.
　Zhang Mingcheng,Jin Guoguang,Discussion on the issue of planetary cone -type transmission interference[J].Journal of Zhengzhou University (Engineering Science),1992,13(02):69.

更新日期/Last Update: 1900-01-01