[1]李大帅,刘敏珊,董其伍..换热设备CAD图形系统集成方法探讨[J].郑州大学学报(工学版),2001,22(02):80-82.[doi:10.3969/j.issn.1671-6833.2001.02.024]
　Li Dashuai,LIU Minshan,Dong Qiwu.Discussion on CAD graphic system integration method of heat exchanger equipment[J].Journal of Zhengzhou University (Engineering Science),2001,22(02):80-82.[doi:10.3969/j.issn.1671-6833.2001.02.024]
点击复制

换热设备CAD图形系统集成方法探讨()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
22卷
期数:
2001年02期
页码:
80-82
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Discussion on CAD graphic system integration method of heat exchanger equipment
作者:
李大帅; 刘敏珊; 董其伍.
郑州工业大学热能工程研究中心,, 郑州工业大学热能工程研究中心,, 郑州工业大学热能工程研究中心,
Author(s):
Li Dashuai; LIU Minshan; Dong Qiwu
关键词:
换热设备;  CAD软件;  面向对象;  图形系统集成
Keywords:
DOI:
10.3969/j.issn.1671-6833.2001.02.024
文献标志码:
A
摘要:
针对换热设备CAD软件的图形系统集成问题,利用面向对象的分析与设计方法,从换热设备的实际结构出发,对其进行面向对象的建模,并以C++编程实现了其图形系统集成.实践证明,这是开发CAD软件、实现图形系统集成的一条行之有效的途径.
Abstract:
Aiming at the problem of graphical system integration of CAD software of heat exchanger equipment, the object-oriented modeling of heat exchange equipment is based on the actual structure of heat exchange equipment by using object-oriented analysis and design methods, and its graphic system integration is realized by C++ programming. Practice has proved that this is an effective way to develop CAD software and realize graphics system integration.

相似文献/References:

[1]董其伍,刘敏珊,曹海亮..换热设备零部件三维造型系统的开发[J].郑州大学学报(工学版),2002,23(04):9.[doi:10.3969/j.issn.1671-6833.2002.04.003]
　Dong Qiwu,LIU Minshan,Cao Hailiang.Development of three-dimensional modeling systems for heat exchange equipment parts[J].Journal of Zhengzhou University (Engineering Science),2002,23(02):9.[doi:10.3969/j.issn.1671-6833.2002.04.003]

更新日期/Last Update: 1900-01-01