[1]王博,王冠月,徐建国.线性结构地震反应分析模型研究[J].郑州大学学报(工学版),1998,19(03):11-14.
 Wang Bo,Wang Guanyue,Xu Jianguo.Research on Linear Structure Earthquake Reactions Analysis Model[J].Journal of Zhengzhou University (Engineering Science),1998,19(03):11-14.
点击复制

线性结构地震反应分析模型研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
19卷
期数:
1998年03期
页码:
11-14
栏目:
出版日期:
1998-12-01

文章信息/Info

Title:
Research on Linear Structure Earthquake Reactions Analysis Model
作者:
王博王冠月徐建国
郑州工业大学水环系,河南省建筑设计院
Author(s):
Wang Bo Wang Guanyue Xu Jianguo
Zhengzhou University of Technology, Henan Province, Henan Province Architectural Design Institute
关键词:
地震反应有限元法计算精度
Keywords:
Earthquake response finite element method calculation accuracy
文献标志码:
A
摘要:
对线性结构地震反应分析所使用的有限元分析模型的计算精度进行了详细的讨论,通过数值算例对比研究了使用不同的有限元质量矩阵对线性结构地震反应计算结果的影响,得出了一些有益的结论,可供计算参考。
Abstract:
The calculation accuracy of the limited element analysis model used in the linear structure earthquake response analysis was discussed in detail. The numerical examples compared the effects of using different finite element mass matrix to the effects of the calculation of the calculation of the linear structure earthquake.

相似文献/References:

[1]刘世忠,刘永健,程高,等.公路桥梁车桥耦合振动数值分析方法[J].郑州大学学报(工学版),2014,35(01):94.[doi:10.3969/j.issn.1671-6833.2014.01.022]
 Liu ShizhongLiu YongjianCheng GaoWang XuLi NaZhao Mingwei.Numerical Analysis Method of Vehicle-Bridge Coupling Vibration for Highway Bridges[J].Journal of Zhengzhou University (Engineering Science),2014,35(03):94.[doi:10.3969/j.issn.1671-6833.2014.01.022]
[2]周云岗.基于迭代分析的多塔悬索桥合理成桥状态确定方法[J].郑州大学学报(工学版),2014,35(01):99.[doi:10.3969/j.issn.1671-6833.2014.01.023]
 Zhou Yungang.Analysis method of reasonable finished dead state of multi-town suspension bridges[J].Journal of Zhengzhou University (Engineering Science),2014,35(03):99.[doi:10.3969/j.issn.1671-6833.2014.01.023]
[3]樊尚春,张津,朱黎明.石墨烯谐振式压力传感器敏感结构研究[J].郑州大学学报(工学版),2019,40(06):47.[doi:10.13705/j.issn.1671-6833.2019.06.011]
 Fan Shangchun,Zhang Jin,Zhu Liming.Study on Sensitive Structure of Graphene Resonant Pressure Sensor[J].Journal of Zhengzhou University (Engineering Science),2019,40(03):47.[doi:10.13705/j.issn.1671-6833.2019.06.011]
[4]李晨阳,刘鹏,陈宏,等.基于驾驶室舱内声学特性的动力吸振器设计研究[J].郑州大学学报(工学版),2021,42(04):47.[doi:10.13705/j.issn.1671-6833.2021.04.008]
 Li Chenyang,Liu Peng,Chen Hong,et al.Design and Research of Dynamic Vibration Absorber Based on Acoustic Characteristics of Interior Sound Field in a Cab[J].Journal of Zhengzhou University (Engineering Science),2021,42(03):47.[doi:10.13705/j.issn.1671-6833.2021.04.008]
[5]施力,朱明霞,黄祖瑷..机械结构非线性动力有限元分析[J].郑州大学学报(工学版),1999,20(04):62.[doi:10.3969/j.issn.1671-6833.1999.04.020]
 Force application,ZHU Mingxia,Huang Zuyi.Nonlinear dynamic finite element analysis of mechanical structures[J].Journal of Zhengzhou University (Engineering Science),1999,20(03):62.[doi:10.3969/j.issn.1671-6833.1999.04.020]
[6]陈旭,王利霞,申长雨,等.数值模拟技术在气体辅助注射成型过程中的应用[J].郑州大学学报(工学版),1998,19(01):3.
 [J].Journal of Zhengzhou University (Engineering Science),1998,19(03):3.
[7]苏智剑,夏恒青.液体圆锥滑动轴承性能分析中的有限元法[J].郑州大学学报(工学版),1996,17(01):29.
 Su Zhijian,Xia Hengqing.The finite element method of liquid cone sliding bearing performance analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):29.
[8]赵晓,李杰.结构──设备体系空间动力学模型建模[J].郑州大学学报(工学版),1995,16(04):32.
 Zhao Xiao,Li Jie.Structure -Equipment System Space Dynamic Model Modeling[J].Journal of Zhengzhou University (Engineering Science),1995,16(03):32.
[9]易恒杰.厚壁园筒弹塑性的有限元分析[J].郑州大学学报(工学版),1994,15(03):60.
 Yi Hengjie.Hand -wall garden cylinder elastics limited element analysis[J].Journal of Zhengzhou University (Engineering Science),1994,15(03):60.
[10]王伟,赖永星.复模态理论的摄动有限元法[J].郑州大学学报(工学版),1992,13(01):1.
 Wang Wei,Lai Yongxing,Crossing Metropolitanian Method of Modeling Model Theory[J].Journal of Zhengzhou University (Engineering Science),1992,13(03):1.

更新日期/Last Update: 1900-01-01