[1]李大磊,覃寿同,马胜钢,等.使用夹具加工工件时定位误差分析与计算探讨[J].郑州大学学报(工学版),1997,18(04):99-101.
Li Dalei,Qin Shoutong,Ma Shenggang,et al.Analysis and calculation of the positioning error analysis and calculation of the positioning error when using the fixture[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):99-101.
点击复制
使用夹具加工工件时定位误差分析与计算探讨(
)
《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]
- 卷:
-
18卷
- 期数:
-
1997年04期
- 页码:
-
99-101
- 栏目:
-
- 出版日期:
-
1997-07-31
文章信息/Info
- Title:
-
Analysis and calculation of the positioning error analysis and calculation of the positioning error when using the fixture
- 作者:
-
李大磊; 覃寿同; 马胜钢; 陈永胜
-
郑州工业大学机械系,郑州磨料磨具磨削研究所
- Author(s):
-
Li Dalei; Qin Shoutong; Ma Shenggang; Chen Yongsheng
-
Department of Mechanical Department of Zhengzhou University of Technology, Zhengzhou abrasive grinding utensil grinding research institute
-
- 关键词:
-
机械加工; 夹具; 定位误差; 调整法
- Keywords:
-
Mechanical processing; fixture; positioning error; adjustment method
- 文献标志码:
-
A
- 摘要:
-
本文概述了定位误差产生的原因，综合分析了各种定位误差计算方法的优缺点，提出了用“调整法”在斜面上钻孔时，特定的工序尺寸标注情况下，计算定位误差出现的新问题，从而导出了定位误差更为广泛的概念。
- Abstract:
-
This article outlines the reasons for the positioning error, comprehensively analyzes the advantages and disadvantages of various positioning error calculation methods, and proposes a new problem of calculating the positioning error when the "adjustment method" is drilled on the slope with the "adjustment method", thereby exporting the concept of a wider positioning error.
相似文献/References:
[1]王庆.利用CSIMAN仿真，确定机械加工车间机床设备的最佳配置方案[J].郑州大学学报(工学版),1996,17(01):72.
Wang Qing.Use CSIMAN simulation to determine the best configuration solution for machinery machine tool equipment[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):72.
更新日期/Last Update:
1900-01-01