[1]刘兴,顾馥保.现代步行商业街设计[J].郑州大学学报(工学版),1991,12(02):37-51+59.
　Liu Xing,Gu Yibao,Modern Pedestrian Commercial Street Design[J].Journal of Zhengzhou University (Engineering Science),1991,12(02):37-51+59.
点击复制

现代步行商业街设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
12卷
期数:
1991年02期
页码:
37-51+59
栏目:
出版日期:
1991-06-28

文章信息/Info

Title:
Modern Pedestrian Commercial Street Design
作者:
刘兴;顾馥保;
郑州工学院建筑系,郑州工学院建筑系,
Author(s):
Liu Xing; Gu Yibao;
Department of Architecture, Zhengzhou Institute of Technology, Department of Architecture, Zhengzhou Institute of Technology,
关键词:
商业街; 设计; 型态化; 硬件要素; 软件要素
Keywords:
Commercial Street;  Design;  stylization;  hardware elements;  software elements
文献标志码:
A
摘要:
本文提出了现代商业街设计的一般模式:可行性分析—构成要素的研究以及对单项设计的具体指导。在第一部分,介绍了影响步行商业街的若干相关因素;第二部分,提出了构成步行商业街的软、硬件要素,并加以型态化表述与说明;最后着重于步行商业街的入口、店面和外部空间等阐述了其单项设计与总体协调的要求、方法。
Abstract:
This article proposes the general model of modern commercial street design: feasibility analysis -the research of constituent elements and specific guidance of single design. In the first part, some related factors affecting the walking commercial street were introduced; the second part proposes the soft and hardware elements that constitute the pedestrian commercial street, and the type of statement and explanation of the type; and finally focusing on the entrance, storefront and external space of the walking commercial street.

相似文献/References:

[1]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
　Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
[2]曲伟石,邱益,赵建国,等.三维动画软件设计及应用[J].郑州大学学报(工学版),1998,19(02):44.
[3]曹东升,张兰.郑州市烟草科技培训楼结构设计[J].郑州大学学报(工学版),1998,19(03):125.
　Cao Dongsheng,Zhang Lan.Zhengzhou Tobacco Technology Training Building Structure Design[J].Journal of Zhengzhou University (Engineering Science),1998,19(02):125.
[4]魏新利.销钉式挤出机的结构特点及挤出机理分析[J].郑州大学学报(工学版),1997,18(01):54.
　Wei Xinli.Analysis of the structural characteristics and extrusion mechanism of the nail -type extruder[J].Journal of Zhengzhou University (Engineering Science),1997,18(02):54.
[5]陈勇孝,孙俊杰.烟机巡回检测系统的设计[J].郑州大学学报(工学版),1996,17(02):84.
　Chen Yongxiao,Sun Junjie.Design of the Higmot Pavilion Detection System[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):84.
[6]陆少鸣,杨立.雨水管网优化设计[J].郑州大学学报(工学版),1994,15(02):35.
　Lu Shaoming,Yang Li.Optimized design of Rainwater Pipe Network[J].Journal of Zhengzhou University (Engineering Science),1994,15(02):35.
[7]石景兰,章崇善,徐文慧.文献信息管理系统的设计与实现[J].郑州大学学报(工学版),1994,15(03):112.
　Shi Jinglan,Zhang Chongshan,Xu Wenhui.Design and implementation of the literature information management system[J].Journal of Zhengzhou University (Engineering Science),1994,15(02):112.
[8]李柱吉,董明亮,芦宜,等.Z-80单板机群控系统接口设计[J].郑州大学学报(工学版),1991,12(01):92.
　Li Zhuji,Dong Mingliang,Lu Yi,et al.Z-80 single-board machine group control system interface design[J].Journal of Zhengzhou University (Engineering Science),1991,12(02):92.
[9]宋蕴玉.郑州国际饭店空调工程设计及使用[J].郑州大学学报(工学版),1988,9(02):52.
　[J].Journal of Zhengzhou University (Engineering Science),1988,9(02):52.

更新日期/Last Update: 1900-01-01