[1]赵国生,董艳艳..变电站电压无功模糊控制器的设计[J].郑州大学学报(工学版),2013,34(04):55.[doi:10.3969/j.issn.1671-6833.2013.04.013]
　ZHAO Guo-sheng,DONG Yan-yan.Substation Voltage and Reactive Power Fuzzy Controller Design[J].Journal of Zhengzhou University (Engineering Science),2013,34(04):55.[doi:10.3969/j.issn.1671-6833.2013.04.013]
点击复制

变电站电压无功模糊控制器的设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
34
期数:
2013年04期
页码:
55
栏目:
出版日期:
2013-09-09

文章信息/Info

Title:
Substation Voltage and Reactive Power Fuzzy Controller Design
作者:
赵国生; 董艳艳.
郑州大学电气工程学院,河南郑州,450001, 郑州大学电气工程学院,河南郑州,450001
Author(s):
ZHAO Guo-sheng; DONG Yan-yan
School of Electrical Engineering ,Zhengzhou University，Zhengzhou 450001 , China
关键词:
模糊控制;  电压无功调节;  九分区
Keywords:
fuzzy control;  voltage and reactive power;  nine partitions
分类号:
TP311
DOI:
10.3969/j.issn.1671-6833.2013.04.013
摘要:
控制好电压和无功并且使其在合格范围内运行具有重要的意义.基于传统九分区的电压无功综合控制存在投切震荡现象,而变电站电压无功模糊控制可以避免这些问题.依据变电站电压无功模糊控制策略设计一个变电站电压无功模糊控制器,并对该模糊控制器进行MATLAB仿真,通过数据分析可以证明设计的模糊控制器能够减少变压器分接头和并联电容器的调节次数,增加变电站设备的使用寿命.
Abstract:
Since the voltage and reactive power are two key factors of the power quality evaluation,how tocontrol the voltage and reactive power and making it within an acceptable range operation are of great signifi-cance. Voltage and reactive power control based on the traditional nine partitions exists oscillation question inswitch operation,however, the fuzzy control method that the substation voltage and reactive power control canavoid these problems. A substation voltage and reactive power fuzy controller is proposed in the paper accord-ing to fuzzy control strategy,and the MATLAB simulation are made on the fuzzy controller,the analysis resultsprove that the fuzzy controller designed in this paper can reduce the regulation numbers of transformer taps andshunt capacitors,meanwhile increase the service life of the substation equipment.

相似文献/References:

[1]赵伟王宁宁段燕燕.载重汽车曲线行驶只能循迹控制仿真研究[J].郑州大学学报(工学版),2015,36(02):10.[doi:10.3969/j.issn.1671 -6833.2015.02.003]
　ZHAO Wei,WANG Ning-ning,DUAN Yan-yan,et al.The Simulation Study of the Truck Curve Traveling Intelligent Traction Control[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):10.[doi:10.3969/j.issn.1671 -6833.2015.02.003]
[2]曹艳玲梁法明刘孟楠.基于模糊决策的大型客车电动助力转向系统研究[J].郑州大学学报(工学版),2015,36(03):64.[doi:10.3969/j.issn.1671 -6833.2015.03.014]
　CAO Yan-ling,LIANG Fa-ming,LIU Meng-nan,et al.Research of Large Bus Electric Power Steering System Based on Fuzzy Control[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):64.[doi:10.3969/j.issn.1671 -6833.2015.03.014]
[3]王明东,苏文霞..并联型模糊PID复合控制器的Simulink建模与仿真[J].郑州大学学报(工学版),2006,27(01):79.[doi:10.3969/j.issn.1671-6833.2006.01.019]
　WANG Mingdong,Su Wenxia.Simulink modeling and simulation of parallel fuzzy PID composite controller[J].Journal of Zhengzhou University (Engineering Science),2006,27(04):79.[doi:10.3969/j.issn.1671-6833.2006.01.019]
[4]冯冬青,张希平..基于神经网络的自学习模糊控制[J].郑州大学学报(工学版),2003,24(04):6.[doi:10.3969/j.issn.1671-6833.2003.04.002]
　Feng Dongqing,Zhang Xiping.Self-learning fuzzy control based on neural network[J].Journal of Zhengzhou University (Engineering Science),2003,24(04):6.[doi:10.3969/j.issn.1671-6833.2003.04.002]
[5]刘红霞,杨开明,黄明生.机器人握力模糊控制系统[J].郑州大学学报(工学版),1996,17(04):115.
　Liu Hongxia,Yang Kaiming,Huang Mingsheng.Robot grip fuzzy control system[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):115.
[6]闫家杰.关于模糊控制的数学模型[J].郑州大学学报(工学版),1996,17(03):78.
　Yan Jiajie.About fuzzy control mathematical model[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):78.

更新日期/Last Update: 1900-01-01