[1]徐建国,王博,陈淮,等.大型单墩渡槽流固耦合动力分析[J].郑州大学学报(工学版),2009,30(04):128-132.
　XU Jianguo,WANG Bo,CHEN Huai,et al.Dynamical Analysis of Large Scale Signal Pier Aqueductwith Fluid-structure Coupling[J].Journal of Zhengzhou University (Engineering Science),2009,30(04):128-132.
点击复制

大型单墩渡槽流固耦合动力分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
30卷
期数:
2009年04期
页码:
128-132
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Dynamical Analysis of Large Scale Signal Pier Aqueductwith Fluid-structure Coupling
作者:
徐建国; 王博; 陈淮; 等.
郑州大学水利与环境工程学院,河南郑州,450001, 郑州大学水利与环境工程学院,河南郑州,450001, 郑州大学水利与环境工程学院,河南郑州,450001, 郑州大学水利与环境工程学院,河南郑州,450001
Author(s):
XU Jianguo; WANG Bo; CHEN Huai; etc
School of Environment and Hydraulic Engineering，Zhengzhou University，Zhengzhou 450001，China
关键词:
单墩渡槽;  流固耦合;  自振频率;  地震响应
Keywords:
signal pier aqueduct; fluid—structure coupling; vibration frequency; seismic response
文献标志码:
A
摘要:
基于所建立的考虑流固耦合渡槽梁段单元动力分析模型,对单墩渡槽结构振动特性和在地震波下的地震响应进行计算分析.该模型综合考虑了渡槽横向、竖向、纵向、自由扭转和约束扭转变形、以及槽内水体与渡槽槽身的流固动力相互作用的影响.计算结果表明流体和槽身的横向动力相互作用对渡槽的横向低频振动影响较大,对横向高频影响较小.动力分析模型的正确性和可靠性说明该模型是考虑渡槽内水体流固耦合的实用的动力分析模型,计算结果可为大型渡槽抗震设计提供参考.
Abstract:
Based on the aqueduct beam element dynamic model with fluid—structure coupling，the seismic response of signal pier aqueduct under earthquake is calculated．In this model，the transverse、vertical、longitudinal deformation and restraint twist deformation，as well as the fluid-structure coupling between aqueduct and water body are all taken into consideration．It is shown the correctness of the solution．The model is practicable and the calculation results provide consults to the anti—seismic design of aqueduct．

相似文献/References:

[1]王博,徐建国,任克彬,等.考虑流固耦合的渡槽结构半主动控制研究[J].郑州大学学报(工学版),2010,31(04):89.[doi:10.3969/j.issn.1671-6833.2010.04.022]
[2]孙康,陈闻..大型金属挤压机卸荷过程插装阀流固耦合分析[J].郑州大学学报(工学版),2012,33(02):91.[doi:10.3969/j.issn.1671-6833.2012.02.022]
　SUN Kang,CHEN Wen..The Fluid and Solid Interaction Analysis in the Processof Huge Metal Extruding Machine[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):91.[doi:10.3969/j.issn.1671-6833.2012.02.022]
[3]刘文红,王家序,周广武,等.含沟槽结构的水润滑橡胶轴承三维弹流润滑分析[J].郑州大学学报(工学版),2012,33(06):79.[doi:10.3969/j.issn.1671-6833.2012.06.019]
　LU Wenhong,WANG Jiaxu,ZHOU Guangwu.Three Dimensional EHL Analyses for Water-lubricated Rubber Bearings with Grooves[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):79.[doi:10.3969/j.issn.1671-6833.2012.06.019]

更新日期/Last Update: 1900-01-01