[1]周彩荣,李静,石晓华,等.肌醇的热分析研究[J].郑州大学学报(工学版),2006,27(04):29-31.[doi:10.3969/j.issn.1671-6833.2006.04.008]
　ZHOU Cairong,LI Jing,SHI Xiaohua,et al.Thermal analysis studies of inositol [J].Journal of Zhengzhou University (Engineering Science),2006,27(04):29-31.[doi:10.3969/j.issn.1671-6833.2006.04.008]
点击复制

肌醇的热分析研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
27
期数:
2006年04期
页码:
29-31
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Thermal analysis studies of inositol

作者:
周彩荣; 李静; 石晓华; 等.
郑州大学化工学院,河南,郑州,450001, 郑州大学化工学院,河南,郑州,450001, 郑州大学化工学院,河南,郑州,450001, 郑州大学化工学院,河南,郑州,450001
Author(s):
ZHOU Cairong; LI Jing; SHI Xiaohua; etc
关键词:
肌醇;  差示扫描量热法;  微分热重-差热法;  熔点;  熔化热
Keywords:
DOI:
10.3969/j.issn.1671-6833.2006.04.008
文献标志码:
A
摘要:
用差示扫描量热法(DSC)和热重法(DTA-TGA)对肌醇进行了热分析研究:用DSC法测得了肌醇的熔点为227.67℃,熔化热为256.67 J·g-1,用DSC和DTA-TGA联合分析得到肌醇分解温度在300℃以上.同时确定了DSC-60差示扫描量热仪测定肌醇的实验条件,即在升温速率10℃·min-1,氮气流速30 ml·min-1的条件下,分析肌醇样品可得到较好的DSC曲线.
Abstract:
Inositol was studied by differential scanning calorimetry (DSC) and thermogravimetric method (DTA-TGA): the melting point of inositol was 227.67 °C, the heat of melting was 256.67 J·g-1 by DSC method, and the decomposition temperature of inositol was above 300 °C by combined analysis of DSC and DTA-TGA. At the same time, the experimental conditions for the determination of inositol by DSC-60 differential scanning calorimeter were determined, that is, under the conditions of temperature increase rate of 10°C·min-1 and nitrogen flow rate of 30 ml·min-1, a good DSC curve could be obtained by analyzing inositol samples.

相似文献/References:

[1]马峰,张超,傅珍..纳米碳酸钙改性沥青的DSC分析[J].郑州大学学报(工学版),2006,27(04):49.[doi:10.3969/j.issn.1671-6833.2006.04.013]
　Ma Feng,ZHANG Chao,Fu Zhen.DSC analysis of nano-calcium carbonate-modified bitumen [J].Journal of Zhengzhou University (Engineering Science),2006,27(04):49.[doi:10.3969/j.issn.1671-6833.2006.04.013]

更新日期/Last Update: 1900-01-01