[1]禹丹江,陈淮..桥梁损伤检测的曲率模态方法探讨[J].郑州大学学报(工学版),2002,23(03):104-106.[doi:10.3969/j.issn.1671-6833.2002.03.029]
　Yu Danjiang,Chen Huai.Discussion on curvature mode method for bridge damage detection[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):104-106.[doi:10.3969/j.issn.1671-6833.2002.03.029]
点击复制

桥梁损伤检测的曲率模态方法探讨()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
23
期数:
2002年03期
页码:
104-106
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Discussion on curvature mode method for bridge damage detection
作者:
禹丹江; 陈淮.
郑州大学土木工程学院,河南,郑州,450002, 郑州大学土木工程学院,河南,郑州,450002
Author(s):
Yu Danjiang; Chen Huai
关键词:
桥梁损伤;  检测;  曲率模态;  数值仿真
Keywords:
DOI:
10.3969/j.issn.1671-6833.2002.03.029
文献标志码:
A
摘要:
曲率模态是结构损伤识别的敏感标示量,采用数值仿真方法,把曲率模态用于桥梁损伤识别,在位移模态中引入噪声之前,曲率模态检测方法能准确判断出损伤的位置,此时,检测结果有很高的准确度和精度,可以检测出结构中出现的损伤.引入噪声后,当位移模态噪声小于1%时,噪声的影响不太明显,仍可以把损伤位置检测出来,但当位移模态噪声大于1%后,不能把损伤位置检测出来.
Abstract:
Curvature mode is the sensitive labeling quantity of structural damage recognition, using numerical simulation method, the curvature mode is used for bridge damage recognition, before the introduction of noise in the displacement mode, the curvature mode detection method can accurately determine the location of the damage, at this time, the detection results have high accuracy and precision, can detect the damage in the structure. After the noise is introduced, when the displacement mode noise is less than 1%, the influence of noise is not obvious, and the damage position can still be detected, but when the displacement mode noise is greater than 1%, the damage position cannot be detected.

相似文献/References:

[1]张海军,张树军,张岩,等.GIN法灌浆浆液试验研究[J].郑州大学学报(工学版),2002,23(01):108.[doi:10.3969/j.issn.1671-6833.2002.01.030]
[2]李珂,刘立新,王仁义,等.商品混凝土后装拔出法地方测强曲线的研究[J].郑州大学学报(工学版),2002,23(02):79.[doi:10.3969/j.issn.1671-6833.2002.02.023]
　LI Ke,LIU Lixin,Wang Renyi,et al.Study on local intensity measurement curve of commercial concrete after-loading extraction method[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):79.[doi:10.3969/j.issn.1671-6833.2002.02.023]
[3]李福山,李永刚..铸铁合金熔体成分及性能热分析系统的研究[J].郑州大学学报(工学版),2001,22(02):30.[doi:10.3969/j.issn.1671-6833.2001.02.010]
　LI Fushan,Li Yonggang.Research on melt composition and performance thermal analysis system of cast iron alloy[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):30.[doi:10.3969/j.issn.1671-6833.2001.02.010]
[4]徐,吕建明,沈宪章,等.粮虫检测系统中图像预处理的初步研究[J].郑州大学学报(工学版),2001,22(03):88.[doi:10.3969/j.issn.1671-6833.2001.03.027]
　Xu,Lv Jianming,Shen Xianxian,et al.A preliminary study of image preprocessing in grain worm detection systems[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):88.[doi:10.3969/j.issn.1671-6833.2001.03.027]

更新日期/Last Update: 1900-01-01