[1]尚海涛,陈铁军..智能控制在黄原胶发酵温度及pH值控制中的应用[J].郑州大学学报(工学版),2002,23(01):55-58.[doi:10.3969/j.issn.1671-6833.2002.01.016]
　SHANG Haitao,Chen Tiejun.The application of intelligent control in xanthan gum fermentation temperature and pH control[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):55-58.[doi:10.3969/j.issn.1671-6833.2002.01.016]
点击复制

智能控制在黄原胶发酵温度及pH值控制中的应用()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
23
期数:
2002年01期
页码:
55-58
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
The application of intelligent control in xanthan gum fermentation temperature and pH control
作者:
尚海涛; 陈铁军.
郑州大学电气工程学院,河南,郑州,450002, 郑州大学电气工程学院,河南,郑州,450002
Author(s):
SHANG Haitao; Chen Tiejun
关键词:
黄原胶发酵过程;  模糊控制;  智能PID;  仿人智能控制
Keywords:
DOI:
10.3969/j.issn.1671-6833.2002.01.016
文献标志码:
A
摘要:
简介了黄原胶发酵过程的工艺与特性,重点讨论了发酵过程温度和pH值的控制问题.控制的重点与难点是系统的非线性与时变特性.采用决策逻辑单元,将模糊控制与智能PID控制相结合,以调节温度,通过分析系统的误差曲线,用仿人智能开关控制方法控制pH值.智能控制的方法取得了较好的控制效果.
Abstract:
The process and characteristics of xanthan gum fermentation process are introduced, and the control of temperature and pH value of fermentation process is discussed. The key points and difficulties of control are the nonlinear and time-varying characteristics of the system. The decision logic unit is used to combine fuzzy control with intelligent PID control to adjust the temperature, and the pH value is controlled by the humanoid intelligent switch control method by analyzing the error curve of the system. The intelligent control method has achieved better control effect.

相似文献/References:

[1]冯冬青,孔祥伟,许仿..城市恒压变频供水系统的一种智能优化控制策略[J].郑州大学学报(工学版),2011,32(01):85.[doi:10.3969/j.issn.1671-6833.2011.01.021]
[2]罗春雷,范增辉,贺建超,等.桩-土近共振沉桩模糊控制器研究[J].郑州大学学报(工学版),2012,33(03):48.[doi:10.3969/j.issn.1671-6833.2012.03.012]
　LUO Chunlei,FAN Zenghui,HE Jian-chao,et al.Study on Pile-soil’s Near-resonant Piles Fuzzy Controller[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):48.[doi:10.3969/j.issn.1671-6833.2012.03.012]
[3]王冬晓,高学山,刘云辉..轮/履耦合式无障碍轮椅系统设计及运动分析[J].郑州大学学报(工学版),2012,33(04):55.[doi:10.3969/j.issn.1671-6833.2012.04.013]
　WANG Dongxiao,GAO Xueshan,LIU Yunhui.Design and Kinematic Analysis of Barrier.free Wheelchair System with aWheel-tracked Coupling Mechanism[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):55.[doi:10.3969/j.issn.1671-6833.2012.04.013]
[4]赵伟,魏朗,张(韦华)..汽车超车并行工况下侧向避撞控制策略研究[J].郑州大学学报(工学版),2008,29(01):83.
　ZHAO Wei,Wei Lang,Zhang (Wei Hua)..Research on lateral collision avoidance control strategy under automobile overtaking parallel working conditions[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):83.
[5]朱晓东,李晓媛,万红..纯滞后系统的模糊复合控制方法[J].郑州大学学报(工学版),2005,26(01):92.[doi:10.3969/j.issn.1671-6833.2005.01.024]
　ZHU Xiaodong,LI Xiaoyuan,Wan Hong.Fuzzy composite control method for pure hysteresis system[J].Journal of Zhengzhou University (Engineering Science),2005,26(01):92.[doi:10.3969/j.issn.1671-6833.2005.01.024]
[6]王明东,刘宪林..基于模糊控制理论的水轮发电机组调速器侧PSS研究[J].郑州大学学报(工学版),2003,24(02):96.[doi:10.3969/j.issn.1671-6833.2003.02.026]
　WANG Mingdong,Liu Xianlin.PSS research on governor side of hydro-generator set based on fuzzy control theory[J].Journal of Zhengzhou University (Engineering Science),2003,24(01):96.[doi:10.3969/j.issn.1671-6833.2003.02.026]
[7]刘武发,蒋蓁,龚振邦..超小型固定翼飞行器飞控系统研究[J].郑州大学学报(工学版),2003,24(03):78.[doi:10.3969/j.issn.1671-6833.2003.03.020]
[8]师黎,丁海..PID控制的参数模糊自整定方法[J].郑州大学学报(工学版),2001,22(03):25.[doi:10.3969/j.issn.1671-6833.2001.03.007]
　Shi Li,Ding Hai.PID-controlled parameter fuzzy autotuning method[J].Journal of Zhengzhou University (Engineering Science),2001,22(01):25.[doi:10.3969/j.issn.1671-6833.2001.03.007]
[9]高建设,刘陆骐,王 杰,等.基于模糊控制的上肢康复机器人变导纳控制[J].郑州大学学报(工学版),2024,45(01):12.[doi:10.13705/j.issn.1671-6833.2024.01.002]
　GAO Jianshe,LIU Luqi,WANG Jie,et al.Variable Admittance Control of Upper Limb Rehabilitation Robot Based on Fuzzy Control[J].Journal of Zhengzhou University (Engineering Science),2024,45(01):12.[doi:10.13705/j.issn.1671-6833.2024.01.002]

更新日期/Last Update: 1900-01-01