[1]张秀丽,刘武发,侯伯杰,等.大型扁绕机数控系统的研制[J].郑州大学学报(工学版),1999,20(04):95-97.[doi:10.3969/j.issn.1671-6833.1999.04.030]
　ZHANG Xiuli,LIU Wufa,Berger Hou,et al.Development of numerical control system for large-scale flat winding machine[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):95-97.[doi:10.3969/j.issn.1671-6833.1999.04.030]

点击复制

大型扁绕机数控系统的研制()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

20

期数:

1999年04期

页码:

95-97

栏目:

出版日期:

1999-01-01

文章信息/Info

Title:

Development of numerical control system for large-scale flat winding machine

作者:

张秀丽; 刘武发; 侯伯杰; 等.

郑州工业大学机械与电子工程学院,河南,郑州,450002, 郑州市公路局总工段,河南,郑州,450052

Author(s):

ZHANG Xiuli; LIU Wufa; Berger Hou; etc

关键词:

数控;  工控机;  伺服控制;  扁绕机

Keywords:

CNC;  Industrial computer;  servo control;  Flat winding machine

DOI:

10.3969/j.issn.1671-6833.1999.04.030

文献标志码:

A

摘要:

对传统扁绕机存在问题的进行分析,提出了基于IPC(工业个人计算机)的数控扁绕系统.该数控系统由工控机、伺服控制卡、伺服驱动装置、编码器等构成半闭环控制电路.控制软件采用C语言编程,通过建立扁绕机运动轨迹的数学模型,实现绕线控制.实验表明,该数控系统可提高扁绕机的绕线精度及工作效率.

Abstract:

This paper analyzes the problems of traditional flat winding machines, and proposes a numerical control flat winding system based on IPC (Industrial Personal Computer). The numerical control system consists of industrial computer, servo control card, servo drive device, encoder, etc. to form a semi-closed-loop control circuit. The control software adopts C language programming, and realizes winding control by establishing a mathematical model of the motion trajectory of the flat winding machine. Experiments show that the numerical control system can improve the winding accuracy and work efficiency of the flat winding machine.

常用功能