[1]王新玲,刘立新.关于砌体结构中偏心距计算的讨论[J].郑州大学学报(工学版),1994,15(01):40-44.
 Wang Xinling,Liu Lixin.Discussion on the calculation of eccentric distance in the masonry structure[J].Journal of Zhengzhou University (Engineering Science),1994,15(01):40-44.
点击复制

关于砌体结构中偏心距计算的讨论()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
15
期数:
1994年01期
页码:
40-44
栏目:
出版日期:
1994-01-28

文章信息/Info

Title:
Discussion on the calculation of eccentric distance in the masonry structure
作者:
王新玲刘立新
郑州工学院土建系
Author(s):
Wang Xinling Liu Lixin
The Department of Civil Construction of Zhengzhou Institute of Technology
关键词:
砌体结构偏心距
Keywords:
Structure of masonry eccentric distance
文献标志码:
A
摘要:
本文针对砌体结构新规范中偏心距e的计算方法进行了讨论,并得出对一般多(单)层混合结构房屋承重墙、柱(地下室外墙除外)可采用荷载设计值来计算偏心距、以简化计算。
Abstract:
This article discusses the calculation method of eccentric distance E in the new specifications of the masonry structure, and obtained the load design value of the housing load -bearing wall and column (except the underground outdoor wall) of the general (single) layer of mixed structures.

相似文献/References:

[1]杨卫忠,刘伟..砌体受压承载力计算[J].郑州大学学报(工学版),2003,24(04):50.[doi:10.3969/j.issn.1671-6833.2003.04.012]
 Yang Weizhong,Liu Wei.Calculation of the compressive bearing capacity of masonry[J].Journal of Zhengzhou University (Engineering Science),2003,24(01):50.[doi:10.3969/j.issn.1671-6833.2003.04.012]
[2]赵雷,马亚丽,王东炜,等.多遇地震下砖砌体结构的随机性分析[J].郑州大学学报(工学版),2001,22(01):74.[doi:10.3969/j.issn.1671-6833.2001.01.021]
 ZHAO Lei,Mayali,Wang Dongwei,et al.Stochastic analysis of brick masonry structure under earthquakes[J].Journal of Zhengzhou University (Engineering Science),2001,22(01):74.[doi:10.3969/j.issn.1671-6833.2001.01.021]
[3]杨卫忠,王丽,张世红,等.垫块下砌体局部受压承载力计算[J].郑州大学学报(工学版),1999,20(04):29.[doi:10.3969/j.issn.1671-6833.1999.04.009]
 Yang Weizhong,WANG Li,ZHANG Shihong,et al.Calculation of the local compressive bearing capacity of the masonry under the pad[J].Journal of Zhengzhou University (Engineering Science),1999,20(01):29.[doi:10.3969/j.issn.1671-6833.1999.04.009]
[4]杨卫忠.砌体局部均匀受压强度计算[J].郑州大学学报(工学版),1998,19(01):64.
 [J].Journal of Zhengzhou University (Engineering Science),1998,19(01):64.

更新日期/Last Update: 1900-01-01