[1]叶元烈,张明成,李春英,等.活塞裙部曲面成型机构的研究[J].郑州大学学报(工学版),1994,15(01):45-51.
　Ye Yuanlie,Zhang Mingcheng,Li Chunying,et al.Research on Pistons skirt surface molding agency[J].Journal of Zhengzhou University (Engineering Science),1994,15(01):45-51.
点击复制

活塞裙部曲面成型机构的研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
15卷
期数:
1994年01期
页码:
45-51
栏目:
出版日期:
1994-01-28

文章信息/Info

Title:
Research on Pistons skirt surface molding agency
作者:
叶元烈; 张明成; 李春英; 陆鑫如
郑州工学院，常州技术师范学院
Author(s):
Ye Yuanlie;  Zhang Mingcheng;  Li Chunying;  Lu Xinru
Zhengzhou Institute of Technology, Changzhou Technical Teachers College
关键词:
曲线; 急回; 误差
Keywords:
Curve;  urgent return;  error
文献标志码:
A
摘要:
本文讨论了内燃机活塞裙部截面廓线变化的规律，提出了切削活塞裙部曲面的机构。分析了机构的运动规律，解决了避免机构“急回”运动出现的方法。建立了机构产生误差的计算公式。
Abstract:
This article discusses the laws of changes in the cross section of the internal combustion engine piston skirt, and proposes a mechanism for cutting piston skirt surface. The movement rules of the organization were analyzed, and the method of avoiding the emergence of the institutional "emergency" movement was solved. Establish an error formula for institutions.

相似文献/References:

[1]郭同德,杜云海,卢艳..GIS中道路曲线的整体误差模型与试验研究[J].郑州大学学报(工学版),2004,25(02):94.[doi:10.3969/j.issn.1671-6833.2004.02.023]
　GUO Tongde,Du Yunhai,Lu Yan.Overall error model and experimental study of road curve in GIS[J].Journal of Zhengzhou University (Engineering Science),2004,25(01):94.[doi:10.3969/j.issn.1671-6833.2004.02.023]
[2]叶元烈,张明成.活塞裙部等曲面和变曲面成型机构的研究[J].郑州大学学报(工学版),1995,16(02):23.
　Ye Yuanlie,Zhang Mingcheng.Research on the surface of the piston skirt and other curved surfaces and curved surface forming institutions[J].Journal of Zhengzhou University (Engineering Science),1995,16(01):23.
[3]张明成,金国光.行星锥式无级变速器干涉问题探讨[J].郑州大学学报(工学版),1992,13(01):69.
　Zhang Mingcheng,Jin Guoguang,Discussion on the issue of planetary cone -type transmission interference[J].Journal of Zhengzhou University (Engineering Science),1992,13(01):69.

更新日期/Last Update: 1900-01-01