[1]李海峰,杨志坚.一类非线性拟双曲型方程组的初边值问题[J].郑州大学学报(工学版),1990,11(04):92-100.
　Li Haifeng,Yang Zhijian,One type of non -linear doubling equation group of the preliminary border value problem[J].Journal of Zhengzhou University (Engineering Science),1990,11(04):92-100.
点击复制

一类非线性拟双曲型方程组的初边值问题()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
11卷
期数:
1990年04期
页码:
92-100
栏目:
出版日期:
1990-12-28

文章信息/Info

Title:
One type of non -linear doubling equation group of the preliminary border value problem
作者:
李海峰;杨志坚;
郑州纺织工学院,郑州工学院,
Author(s):
Li Haifeng; Yang Zhijian;
Zhengzhou Textile Institute of Technology, Zhengzhou Institute of Technology,
关键词:
非线性; 拟双曲组; 初边值问题
Keywords:
Nonal
文献标志码:
A
摘要:
本文用先验估计方法及Leary-Schaudcr不动点原理讨论了一类非线性拟双曲型方程组初边值问题广义解的存在唯一性。
Abstract:
This article discusses the uniqueness of the existence of a variety of non-linear dual-curved equations in the principle of priority estimation method and LeAry-Schaudcr non-moving point principle.

相似文献/References:

[1]王洪明郝旺身韩捷.基于LMD和样本熵的齿轮故障特征提取方法研究[J].郑州大学学报(工学版),2015,36(03):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
　WANG Hong-min,HAO Wang-shen,HAN Jie,et al.Research on Gear Fault Feature ExtractionBased on LMD and Sample Entropy[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
[2]吴素珍,何卫东.RV针摆传动齿面接触强度非线性分析[J].郑州大学学报(工学版),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
　WU Su-zhen,HE Wei-dong.On the Nonlinear Analysis of Contact Strength of Cycloid-pinGear Transmission Surface[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
[3]李宇,李钊,李琛.钢-砼混合梁斜拉桥的颤抖振时域分析[J].郑州大学学报(工学版),2016,37(03):69.[doi:10.13705/ j. issn.1671 -6833.2016.03.016]
　LI Yu,LI Zhao,LI Chen.Flutter and Buffeting Analysis for Cable-stayed Bridge with Steel-concrete Girder[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):69.[doi:10.13705/ j. issn.1671 -6833.2016.03.016]
[4]陶征,胡斌,刘旭.基于螺栓联接非线性系统的杆式超声电机建模与分析[J].郑州大学学报(工学版),2017,38(01):78.[doi:10.13705/j.issn.1671-6833.2017.01.006]
　Tao Zheng,Hu Bin,Liu Xu.Modeling and Analysis of the Rod-type Ultrasonic Motor Based on Bolted-joint[J].Journal of Zhengzhou University (Engineering Science),2017,38(04):78.[doi:10.13705/j.issn.1671-6833.2017.01.006]
[5]刘渭川,王光龙.新摄动法的一个应用[J].郑州大学学报(工学版),1996,17(03):115.
　Liu Weichuan,Wang Guanglong.An application of the new critical method[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):115.

更新日期/Last Update: 1900-01-01