[1]邵国胜,沈宁福.以对称多束CBED图确定显微相的结构[J].郑州大学学报(工学版),1990,11(03):8-10.
　Shao Guosheng,Shen Ningfu,Determine the structure of the micro -phase with the symmetrical multi -beam CBED diagram[J].Journal of Zhengzhou University (Engineering Science),1990,11(03):8-10.
点击复制

以对称多束CBED图确定显微相的结构()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
11
期数:
1990年03期
页码:
8-10
栏目:
出版日期:
1990-09-28

文章信息/Info

Title:
Determine the structure of the micro -phase with the symmetrical multi -beam CBED diagram
作者:
邵国胜;沈宁福;
郑州工学院材料研究中心,郑州工学院材料研究中心,
Author(s):
Shao Guosheng; Shen Ningfu;
Zhengzhou Institute of Technology Materials Research Center, Material Research Center of Zhengzhou Institute of Technology,
关键词:
会聚束电子衍射; 急冷铝合金
Keywords:
Capital beam electronic diffraction;  acute cold aluminum alloy
文献标志码:
A
摘要:
本文采用对称多束会聚柬电子衍射图确定了一种尺度为数10nm至1μm的显微沉积相的晶体结构,指出会聚束衍射。尤其是对称多柬会聚束衍射图,是确定晶体材料中显微相结构的极其有用的方法。
Abstract:
This article uses a symmetrical multi -beam to gather Cambodian electronic diffraction diagrams to determine a crystal structure with a micro -sedimentary phase with a scale of 10nm to 1 μm, which pointed out that the beam will be diffracted. In particular, the symmetrical multi -Cambodian clustering diffraction diagram is an extremely useful method to determine the microscopic structure in the crystal material.

相似文献/References:

[1]汤亚力,沈宁福,邵国胜,等.用分析电子显微镜研究快速凝固A18Fe4Ce3Ti合金中的未知相[J].郑州大学学报(工学版),1991,12(04):58.
　Tang Yali,Shen Ningfu,Shao Guosheng,et al.Use an analytical electronic microscope to study the unknown phase in the A18FE4CE3TI alloy[J].Journal of Zhengzhou University (Engineering Science),1991,12(03):58.

更新日期/Last Update: 1900-01-01