相似文献/References:
[1]王洪明郝旺身韩捷.基于LMD和样本熵的齿轮故障特征提取方法研究[J].郑州大学学报(工学版),2015,36(03):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
WANG Hong-min,HAO Wang-shen,HAN Jie,et al.Research on Gear Fault Feature ExtractionBased on LMD and Sample Entropy[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):44.[doi:10.3969/ j. issn. 1671 -6833.2015.03.010]
[2]张然,汪海年,周俊,等.基于离散-连续耦合方法的土工格室加筋碎石承载能力数值模拟[J].郑州大学学报(工学版),2016,37(01):49.[doi:10.3969/j.issn.1671-6833.201410012]
Wang Hainian,Zhang Ran,Zhou Jun,et al.Numerical Simulation of the Bearing Capacity for Geocell Reinforced Gravel Based on Discrete-Continuous Coupling Calculation[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):49.[doi:10.3969/j.issn.1671-6833.201410012]
[3]翟科玮,杜朝伟,郑凤玺,等.在役钢筋混凝土T形梁桥承载能力的模糊随机评估法[J].郑州大学学报(工学版),2017,38(04):88.[doi:10.13705/j.issn.1671-6833.2017.01.014]
Zhai KeweiDu ChaoweiZheng FengxiZheng Yuanxun.Load Bearing Capacity of Existing Rural Highway RC T Beam Bridge Based on Fuzzy Comprehensive Evaluation[J].Journal of Zhengzhou University (Engineering Science),2017,38(04):88.[doi:10.13705/j.issn.1671-6833.2017.01.014]
[4]刘竹丽,陈赟,王祝新.齿面残余应力对齿轮轮齿弯曲疲劳寿命的影响分析[J].郑州大学学报(工学版),2020,41(03):53.[doi:10.13705/j.issn.1671-6833.2019.02.013]
Liu Zhuli,Chen Yun,Wang Zhuxin.The analysis of the residual stress of tooth surfaces influence on the flexural fatigue life of gear tooth[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):53.[doi:10.13705/j.issn.1671-6833.2019.02.013]
[5]刘景艳,李玉东,杨晓邦..遗传神经网络在齿轮故障诊断中的应用[J].郑州大学学报(工学版),2012,33(03):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
LIU Jingyan,LI Yudong,YANG Xiaobang.Application of Genetic Neural Network to Gear Fault Diagnosis[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):36.[doi:10.3969/j.issn.1671-6833.2012.03.009]
[6]冯伟,谢小鹏,刘粲..齿轮磨损试验光谱油样分析及建模研究[J].郑州大学学报(工学版),2009,30(04):76.
FENG Wei,XIE Xiaopeng,LIU Yu.Spectrographic Oil Analysis of and Modeling Study on Gear Wear Test[J].Journal of Zhengzhou University (Engineering Science),2009,30(04):76.
[7]陈淮,苗同臣..钻井井架屈曲荷载分析的动态评估方法[J].郑州大学学报(工学版),2001,22(01):10.[doi:10.3969/j.issn.1671-6833.2001.01.003]
CHEN Huai,Miao Tongchen.Dynamic evaluation method for buckling load analysis of drilling derrick[J].Journal of Zhengzhou University (Engineering Science),2001,22(04):10.[doi:10.3969/j.issn.1671-6833.2001.01.003]
[8]周兵,钱德沛.YK7163磨齿机数控系统的实现[J].郑州大学学报(工学版),1997,18(01):115.
Zhou Bing,Qian Depei.The implementation of YK7163 tooth grinding machine CNC system[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):115.
[9]周兵.YK7163数控磨齿机的修形算法研究[J].郑州大学学报(工学版),1996,17(03):107.
Zhou soldiers.Research on the repair algorithm of YK7163 CNC tooth grinding machine[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):107.
[10]熊滨生.渐开线园柱齿轮变形量fsho的计算[J].郑州大学学报(工学版),1988,9(03):31.