[1]陶梦雅,高正霞,刘 伟,等.氧化铁对稳定镁白云石材料性能的影响[J].郑州大学学报(工学版),2023,44(04):101-106.[doi:10.13705/j.issn.1671-6833.2023.01.012]
 TAO Mengya,GAO Zhengxia,LIU Wei,et al.Effect of Iron Oxide on Properties of Stabilized Magnesia Dolomite[J].Journal of Zhengzhou University (Engineering Science),2023,44(04):101-106.[doi:10.13705/j.issn.1671-6833.2023.01.012]
点击复制

氧化铁对稳定镁白云石材料性能的影响()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
44卷
期数:
2023年04期
页码:
101-106
栏目:
出版日期:
2023-06-01

文章信息/Info

Title:
Effect of Iron Oxide on Properties of Stabilized Magnesia Dolomite
作者:
陶梦雅12 高正霞12刘 伟12李 祥12郭小腾12锁 东3田世帅3马成良12
1.郑州大学 材料科学与工程学院, 河南 郑州 450001, 2.河南省高温功能材料重点实验室, 河南 郑州 450052, 3.三门峡电熔刚玉有限责任公司, 河南 三门峡 472400

Author(s):
TAO Mengya12GAO Zhengxia12LIU Wei12LI Xiang12GUO Xiaoteng12SUO Dong3TIAN Shishuai3MA Chengliang12
School of Materials Science and Engineering, Zhengzhou University, 450001, Zhengzhou, Henan, Key Laboratory of High -temperature functional materials in Henan Province, Zhengzhou 450052, Henan, Sanmenxia Electric Power Morality Co., Ltd., Henan Sanmenxia 472400

关键词:
氧化铁 稳定镁白云石 抗水化性 挂窑皮性能 物理性能
Keywords:
iron oxide stabilized magnesia dolomite hydration resistance coatability adherence physical properties
分类号:
TQ175.7
DOI:
10.13705/j.issn.1671-6833.2023.01.012
文献标志码:
A
摘要:
为了改善镁白云石材料的性能,以白云石、高硅菱镁矿、硅石、氧化铁粉为主要原料,采用二步煅烧和消化工艺合成氧 化铁含量分别 0、0. 5%、1. 0%、1. 5%(质量分数下同)的 4 个系列的稳定镁白云石砂,再以此为主要原料制备相应 4 个系列的 镁白云石制品。 探究了氧化铁含量对试样物理性能、抗水化性、挂窑皮性能的影响,并分析了试样物相组成和显微结构。 结 果表明:随着氧化铁含量的增加,试样的常温抗折强度和常温耐压强度增大,高温抗折强度和试样粘结强度降低,试样的热震 残余强度保持率先升高后降低。 当氧化铁含量增加至 1. 5%时,试样的水化增重率降低至 0. 12%,抗水化性提高。 由 XRD 图 谱分析得出,试样的主晶相为方镁石、硅酸二钙和硅酸三钙,并且随着氧化铁含量的增加,C2 S 和 C3 S 的衍射峰变强,峰形尖 锐,说明氧化铁可以促进 C2 S 和 C3 S 的晶体发育,提高试样的致密度。
Abstract:
In order to improve the performance of magnesia dolomite materials, stabilized magnesium dolomite refractory materials whose iron oxide content ( mass fraction) was 0, 0. 5%, 1. 0%, 1. 5%, respectively, were prepared from natural dolomite, high silicon magnesite, silica and iron oxide powder by two-stage calcination and slaking process. The influence of iron oxide content on the physical properties, hydration resistance and coatability adherence of the samples was investigated. The phase composition and microstructure of the specimens were characterized. The results show that, as the iron oxide content increases, the room temperature flexural strength and the room temperature compressive strength increase, the high temperature flexural strength and the adherence strength decrease, and the retention rate of the thermal shock strength of the sample first increases and then decreases. With the iron oxide content increasing to 1. 5%, the hydration weight gain rate of the sample decreases to 0. 12%, and the hydration resistance improves. According to the XRD spectrum analysis, the main crystal phases of the sample are periclase, dicalcium silicate and tricalcium silicate. With the increase of iron oxide content, the diffraction peaks of C2 S and C3 S become stronger and the peak shapes are sharp. It shows that iron oxide can promote the growth of C2 S and C3 S crystals and increase the density of the sample.

参考文献/References:

[1] 张巍. 水泥窑用耐火材料的研究进展[J]. 水泥工程, 2013(2): 5-10, 23.ZHANG W. Progress in research on refractories for cement kiln[J]. Cement Engineering, 2013(2): 5-10, 23.[2] 陈肇友. 水泥回转窑烧成带用无铬耐火材料[J]. 耐火材料, 2010, 44(6): 404-408.CHEN Z Y. Chrome-free basic refractories for burning zone of cement rotary kiln[J]. Refractories, 2010, 44(6): 404-408.

[3] 赵瑞, 张子英, 柴俊兰, 等. 白云石矿产资源开发利用现状及前景[C] ∥2019年全国耐火原料学术交流会论文集. 北京: 中国金属学会, 2019: 26-31.ZHAO R, ZAHNG Z Y, CHAI J L, et al. The current situation and prospects of the development and utilization of dolomite mineral resources[C]∥Proceedings of the 2019 National Refractory Materials Academic Exchange Conference. Beijing: The Chinese Society for Metals, 2019: 26-31.
[4] 郑连营, 曹俊庆. 镁白云石砖在水泥回转窑烧成带的应用[C] ∥第十六届全国耐火材料青年学术报告会论文集. 北京: 中国金属学会, 2018: 252-256.ZHENG L Y, CAO J Q. Application of magnesia dolomite brick in the firing zone of cement rotary kiln [C]∥Proceedings of the 16th National Youth Conference on Refractories. Beijing: The Chinese Society for Metals, 2018: 252-256.
[5] 于秋月. MgO-CaO耐火材料抗水化性能研究进展[J]. 有色矿冶, 2018, 34(2): 39-42.YU Q Y. Progress in research on hydration resistance of MgO-CaO refractories[J]. Non-ferrous Mining and Me-tallurgy, 2018, 34(2): 39-42.
[6] ZHAN X W, WU X P, XING Y Q, et al. Improved hydration resistance of MgO-2CaO·SiO2-3CaO·SiO2 composite refractory using low-grade minerals[J]. Materials Research Express, 2020, 7(8): 085502.
[7] 高正霞, 陶梦雅, 刘伟, 等. Al粉、Si粉复合低碳稳定镁钙材料的抗氧化性[J]. 耐火材料, 2021, 55(5): 430-434.GAO Z X, TAO M Y, LIU W, et al. Oxidation resis-tance of Al/Si composite low-carbon stabilized MgO-CaO materials[J]. Refractories, 2021, 55(5): 430-434.
[8] 孙铭成, 马成良, 钟香崇. Al粉加入量对树脂结合MgO-CaO材料性能的影响[J]. 耐火材料, 2010, 44(6): 423-425.SUN M C, MA C L, ZHONG X C. Effect of Al powder addition on properties of resin-bonded MgO-CaO materials[J]. Refractories, 2010, 44(6): 423-425.
[9] 孟维, 马成良, 葛铁柱, 等. 稳定性锆镁白云石合成材料的制备、结构和性能研究[J]. 郑州大学学报(工学版), 2016, 37(4): 40-43.MENG W, MA C L, GE T Z, et al. Preparation and investigation on the microstructure and properties of stabilized zirconia magnesia doloma refractory materials[J]. Journal of Zhengzhou University (Engineering Science), 2016, 37(4): 40-43.
[10] MENG W, MA C L, GE T Z, et al. Effect of zircon addition on the physical properties and coatability adherence of MgO-2CaO·SiO2-3CaO·SiO2 refractory materials[J]. Ceramics International, 2016, 42(7): 9032-9037.
[11] 李祥, 戚文豪, 孟维, 等. 钙硅比对稳定镁白云石材料性能的影响[J]. 耐火材料, 2021, 55(5): 414-416.LI X, QI W H, MENG W, et al. Effect of calcia/silica ratio on properties of stabilized magnesia dolomite materials[J]. Refractories, 2021, 55(5): 414-416.
[12] 孟维, 马成良, 钟香崇. 利用镁石和镁橄榄石制备稳定性镁白云石熟料[C] ∥2015耐火材料综合学术年会(第十三届全国不定形耐火材料学术会议和2015耐火原料学术交流会)论文集(4). 北京: 中国金属学会, 2015:68-70.MENG W, MA C L, ZHONG X C, et al. Preparation of stabilized magnesium dolomite clinker by using magnesia and forsterite[C]∥2015 Refractory Comprehensive Academic Annual Conference (The 13th National Amorphous Refractory Academic Conference and 2015 Refractory Material Academic Exchange Conference) Proceedings (4). Beijing: The Chinese Society for Metals, 2015: 68-70.
[13] 孟维, 马成良, 钟香崇. 烧成温度对稳定性镁白云石材料性能的影响[J]. 耐火材料, 2016, 50(3): 174-176.MENG W, MA C L, ZHONG X C. Effect of firing temperature on properties of stabilized magnesia dolomite materials[J]. Refractories, 2016, 50(3): 174-176.
[14] YEPREM H A. Effect of iron oxide addition on the hydration resistance and bulk density of doloma[J]. Journal of the European Ceramic Society, 2007, 27(2/3): 1651-1655.
[15] 肖国庆, 杨兴华. Fe2O3、Al2O3加入物对镁钙砂抗水化性的影响[J]. 耐火材料, 1998, 32(2): 77-79.XIAO G Q, YANG X H. The effect of Fe2O3, Al2O3 additives on hydration resistance of MgO-CaO clinkers[J]. Refractories, 1998, 32(2): 77-79.
[16] GHOSH A, TRIPATHI H S. Sintering behaviour and hydration resistance of reactive dolomite[J]. Ceramics International, 2012, 38(2): 1315-1318.
[17] KASHANINIA F, SARPOOLAKY H, NAGHIZADEH R, et al. Improving hydration resistance of magnesia-doloma refractories by iron oxide addition[J]. Iranian Journal of Materials Science and Engineering, 2011, 8(4): 34-40.
[18] 国家质量监督检验检疫总局, 中国国家标准化管理委员会. 致密定形耐火制品体积密度、显气孔率和真气孔率试验方法: GB/T 2997—2015[S]. 北京: 中国标准出版社, 2017.General Administration of Quality Supervision, Inspection and Quarantine of the People′s Republic of China, Standardization Administration of the People′s Republic of China. Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products: GB/T 2997—2015[S]. Beijing: Standards Press of China, 2017.
[19] 国家质量监督检验检疫总局, 中国国家标准化管理委员会. 耐火材料—高温抗折强度试验方法: GB/T 3002—2017[S].北京: 中国标准出版社, 2017.General Administration of Quality Supervision, Inspection and Quarantine of the People′s Republic of China, Standardization Administration of the People′s Republic of China. Refractory products—determination of modules of rupture at elevated temperatures: GB/T 3002—2017[S].Beijing: Standards Press of China, 2017.
[20] 中华人民共和国冶金工业部. 耐火制品抗热震性试验方法: YB 4018—1991[S].北京: 中国标准出版社, 1991.Ministry of Metallurgical Industry of the People′s Republic of China. Test method for thermal shock resistance of refractory products: YB 4018—1991[S].Beijing: Standards Press of China, 1991.

更新日期/Last Update: 2023-07-01