[1]王定标,张喜迎,韩勇,等.梭形凹凸板式换热器相变换热的优化研究[J].郑州大学学报(工学版),2017,38(01):36.[doi:10.13705/j.issn.1671-6833.2016.04.022]
 Wang Dingbiao,Zhang Xiying,Han Yong,et al.Optimization Study On Phase-change Heat Transfer Of The Plate Heat Exchanger With The Pits Of The Shuttle-shape[J].Journal of Zhengzhou University (Engineering Science),2017,38(01):36.[doi:10.13705/j.issn.1671-6833.2016.04.022]
点击复制

梭形凹凸板式换热器相变换热的优化研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
38卷
期数:
2017年01期
页码:
36
栏目:
出版日期:
2017-02-24

文章信息/Info

Title:
Optimization Study On Phase-change Heat Transfer Of The Plate Heat Exchanger With The Pits Of The Shuttle-shape
作者:
王定标张喜迎韩勇邓靜董桢
郑州大学化工与能源学院,河南郑州,450001
Author(s):
Wang Dingbiao Zhang Xiying Han Yong Deng Jing Dong Zhen
College of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou, Henan 450001 
关键词:
Keywords:
DOI:
10.13705/j.issn.1671-6833.2016.04.022
文献标志码:
A
摘要:
针对梭型凹坑凸胞板式换热器的凹坑流道,采用ANSYS Workbench进行了相变换热优化研究.以综合传热性能因子PEC、Nu、f为共同的目标函数,研究了梭型凹坑半径R、梭型凹坑长度L、凹坑分布间距P等结构参数对梭型凹坑凸胞板式换热器相变换热的性能影响.研究结果表明:梭型凹坑处水蒸气的体积分数明显高于平板处的水蒸气体积分数,说明梭型凹坑凸胞板对相变换热有着很好的强化作用,并且梭型凹坑流道的换热性能优于相应参数下圆形凹坑的换热性能.本研究中得到的最优结构R=3mm、L=5 mm、P=24 mm,此时对应的PEC=2.16、Nu=137.15、f=0.1874.
Abstract:
ANSYS Workbench is widely used for multiobjective optimization,by which we made an optimization study on phase-change heat transfer of the plate heat exchanger with the fusiform dimples.And the influence of R,L,D on the thermal-hydraulic performance was explored with Nu,f and PEC serving as the objective function.The results showed that the volume fraction of water vapor around the fusiform dimples was significantly higher than the smooth plate which was far away from fusiform dimples.It proved that the plate with the fusiform dimples has a very good strengthening effect on phase-change heat transfer.And that with the corresponding parameter setting the thermal-hydraulic performance of the fusiform dimples was higher than the circular dimples.Within the scope of the study,the optimal structure parameters was R =3 mm、L =5 mm、P =24 mm,and the objective function was PEC =2.16,Nu =137.15,f=0.187 4.

相似文献/References:

[1]谢国宾,胡启国,罗天洪,等.多指标约束下齿轮传动机构模糊可靠性优化设计[J].郑州大学学报(工学版),2016,37(01):34.[doi:10.3969/j.issn.1671-6833.201504038]
 Hu Qiguo,Xie Guobin,Luo Tianhong,et al.Fuzzy Reliability Optimization Design of Gear Transmission Mechanism under Multi-specification Restriction[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):34.[doi:10.3969/j.issn.1671-6833.201504038]
[2]卢晓明,贾建军,周成林,等.1m口径空间相机主望远镜组件设计[J].郑州大学学报(工学版),2018,39(03):72.[doi:10.13705/j.issn.1671-6833.2018.03.008]
 Lu Xiaoming,Jia Jianjun,Zhou Chenglin,et al.Component Design on Telescope with 1m-caliber Space Camera[J].Journal of Zhengzhou University (Engineering Science),2018,39(01):72.[doi:10.13705/j.issn.1671-6833.2018.03.008]
[3]贾玉梅,苏智剑,叶元烈.汽车变速箱齿轮副的多目标离散优化[J].郑州大学学报(工学版),1996,17(03):26.
 Jia Yumei,Su Zhijian,Ye Yuanlie.Multi -target discrete optimization of car gearbox gear[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):26.
[4]周志安,丁克勤.背叶片密封封液能力的探讨及其优化[J].郑州大学学报(工学版),1995,16(01):1.
 Zhou Zhian,Ding Keqin.Discussion and optimization of back blades sealing solution capabilities[J].Journal of Zhengzhou University (Engineering Science),1995,16(01):1.
[5]周志安,欧阳昕.螺旋密封封液能力的探讨及其优化[J].郑州大学学报(工学版),1992,13(04):81.
 Zhou Zhian,Ouyang Xin,Discussion and optimization of spiral sealing solution capabilities[J].Journal of Zhengzhou University (Engineering Science),1992,13(01):81.

更新日期/Last Update: