[1]李成,陈功轩,铁瑛,等.基于压电阻抗技术的铝梁损伤定位试验研究[J].郑州大学学报(工学版),2016,37(04):82-85,96.[doi:10.13705/j.issn.1671-6833.2016.04.018]
 Li Cheng,Chen Gongxuan,Tie Ying,et al.Experimental Research of Damage Location in Aluminum Beam Base on EMI Technique[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):82-85,96.[doi:10.13705/j.issn.1671-6833.2016.04.018]
点击复制

基于压电阻抗技术的铝梁损伤定位试验研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
37卷
期数:
2016年04期
页码:
82-85,96
栏目:
出版日期:
2016-08-31

文章信息/Info

Title:
Experimental Research of Damage Location in Aluminum Beam Base on EMI Technique
作者:
李成陈功轩铁瑛牛冬冬
郑州大学机械工程学院,河南郑州,450001
Author(s):
School of Mechanical Engineering, Zhengzhou University, Zhengzhou, Henan 450001
关键词:
压电阻抗技术无损检测损伤定位相关系数阻抗
Keywords:
DOI:
10.13705/j.issn.1671-6833.2016.04.018
文献标志码:
A
摘要:
为了识别铝梁结构损伤位置,运用压电阻抗技术对铝梁进行了损伤定位试验研究.用精密阻抗分析仪在不同频率段下对无损及自制损伤孔两种情况下的阻抗实部信号进行测量,并用pearson相关系数处理试验数据,通过多次试验找到了阻抗实部相关系数值与压电陶瓷传感器(piezoceramic transducer,PZT)和损伤之间距离近似成线性关系的适测频率段.并在适测频率段内进行铝梁损伤定位试验,损伤孔及裂纹位置的探测值与实际值基本吻合,从而证实了该方法应用于铝梁损伤定位的有效性,可为无损检测的损伤定位提供参考.
Abstract:
In order to identify the damage location of aluminum beam structures, piezoelectric impedance technology was used to conduct damage localization experiments on aluminum beams. Precision impedance analyzers were used to measure the impedance real part signals of non-destructive and self-made damage holes at different frequency bands, and Pearson correlation coefficients were used to process the experimental data, Through multiple experiments, the impedance real part correlation coefficient values were found to be approximately linearly related to the distance between the piezoelectric ceramic sensor (PZT) and the damage in the applicable frequency range. Aluminum beam damage localization experiments were conducted within the applicable frequency range, and the detection values of damage holes and crack positions were basically consistent with the actual values. This confirms the effectiveness of this method in aluminum beam damage localization and can provide reference for non-destructive testing of damage localization

相似文献/References:

[1]吕彭民,吴玉文,宋年波.钢桥面铺装层粘接强度超声波无损检测技术研究[J].郑州大学学报(工学版),2017,38(05):55.[doi:10.13705/j.issn.1671-6833.2017.05.023]
 Lu Pengmin,Wu Yuwen,Song Nianbo.Research on the Non-destructive Test Technology of Bonding Strength for the Steel Bridge Deck Pavement Layer[J].Journal of Zhengzhou University (Engineering Science),2017,38(04):55.[doi:10.13705/j.issn.1671-6833.2017.05.023]
[2]王军芬,刘培跃,董建彬,等.用于分割无损检测图像的快速模糊C-均值算法[J].郑州大学学报(工学版),2022,43(06):42.[doi:10.13705/j.issn.1671-6833.2022.04.016]
 WANG J F,LIU P Y,DONG J B,et al.Fast Fuzzy C Means Algorithm for Segmentation of Non-destructive Testing Image[J].Journal of Zhengzhou University (Engineering Science),2022,43(04):42.[doi:10.13705/j.issn.1671-6833.2022.04.016]
[3]陶向华,袁丽颖,王复明,等.探地雷达(GPR)在路面工程质量检测中的应用[J].郑州大学学报(工学版),2001,22(04):63.[doi:10.3969/j.issn.1671-6833.2001.04.018]
 Tao Xianghua,Yuan Liying,Wang Fuming,et al.Application of ground penetrating radar (GPR) in pavement engineering quality inspection[J].Journal of Zhengzhou University (Engineering Science),2001,22(04):63.[doi:10.3969/j.issn.1671-6833.2001.04.018]

更新日期/Last Update: