[1]张建华,余辉,黑灵巧,等.体部伽马刀放疗中精确靶位控制系统的仿真设计[J].郑州大学学报(工学版),2013,34(03):22-25.[doi:10.3969/j.issn.1671-6833.2013.03.006]
　ZHANG Jian-hua,YU Hui,HEI Ling-qiao,et al.Simulation Design of Precise Target Control System inBody Gamma Knife Radiotherapy[J].Journal of Zhengzhou University (Engineering Science),2013,34(03):22-25.[doi:10.3969/j.issn.1671-6833.2013.03.006]
点击复制

体部伽马刀放疗中精确靶位控制系统的仿真设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
34卷
期数:
2013年03期
页码:
22-25
栏目:
出版日期:
2013-05-31

文章信息/Info

Title:
Simulation Design of Precise Target Control System inBody Gamma Knife Radiotherapy
作者:
张建华; 余辉; 黑灵巧; 等.
郑州大学电气工程学院,河南郑州,450001, 郑州人民医院设备科,河南郑州,450003, 黄淮学院电子科学与工程系,河南驻马店,463000
Author(s):
ZHANG Jian-hua1;  YU Hui1; HEI Ling-qiao2; WANG Ming-xia1; WEl Ying-jun3
1.Sehool of Electrical Engineering，Zhengzhou University ，Zhengzhou 450001 , China; 2.Equipment department，ZhengzhouPeople ’s Hospital，Zhengzhou 450003，China; 3. Deportment of Electronic Science and Engineering，Huanghuai University ,Zhumadian，463000，China
关键词:
BFGS;  优化建模;  传感器;  步进电机;  单片机
Keywords:
BFGS;  optimization modeling;  sensor;  stepping motor ; SCM
分类号:
TP29 R318.6
DOI:
10.3969/j.issn.1671-6833.2013.03.006
文献标志码:
A
摘要:
介绍了一种新颖伽马刀摆位床的控制方法.该方法通过BFGS算法建立由人体呼吸而产生的肿瘤位移的位移模型,用压电传感器采集患者呼吸信号,单片机系统接收到压电传感器发出的呼吸信号后会对步进电机进行控制,从而使摆位床按呼吸规律的逆向进行运动,仿真实验结果表明,该设计能够减少呼吸运动造成的肿瘤偏移幅度,为伽马刀摆位床的控制提供了一种新颖的方法和理论依据.
Abstract:
This paper introduces a novel control design of gamma knife positioning bed.Respiratory move-ments would inevitably cause tumor displacement. In this design，tumor displacement model produced by hu-man respiration was established through BFCS algorithm. Firstly , piezo sensor was used to collct respiratorysignal.Secondly, in order to make the positioning bed move by reverse respiration，after receiving the respira-tory signal，single chip microcomputer ( SCM) system would control stepping motor. The simulation experi-ment results showed that this design can reduce the influence of respiratory movements on the precision of ra-diotherapy，which produces a novel method and theoretical basis for the control of gamma knifepositioning bed.

参考文献/References:

[1]郑荣寿,张思维,吴良有,等.中国肿瘤登记地区2008年恶性肿瘤发病和死亡分析[J].中国肿瘤，2012,21( 1):1-12.

[2]任金山.浅谈中医与西医放射结合治疗肿瘤的优势与疗效[J].中医临床研究,2011,3(6):115- 116.

更新日期/Last Update: 1900-01-01